Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADUM5404CRWZRL by Analog Devices is a 16-terminal interface IC with supply voltage range of 3-5.5V, operating temperature from -40 to 105°C. It is used in industrial applications requiring small outline package and dual terminal position for signal isolation.
Median Price
$13.130
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$16.020
100+ parts
$8.575
1k+ parts
10k+ parts
-
DigiKey
$16.700
$11.475
Verical
$10.239
Rochester
$9.370
$8.380
$7.890
Digiode
$9.054
Mobius Materials
$9.600
$7.670
Vyrian
VNN
Nova Conductors
Parana Technologies
$4.689
$4.361
IDEA Electronic Components Group
$5.042
$4.790
Corohmni
$5.725
Aztec Data Supply Inc.
$6.420
DigiPath Technology Company
$7.866
$7.551
Semicontronic
$8.100
$7.898
$7.857
Ampacity Inc.
Corphita
$8.577
Authorized Procurement Solutions
Continental Prestige Electronics
RC Electronics
Argo Parts USA
Bastille Electronics
iodParts Technologies Inc.
GreenTree Electronics
Speed Components Ltd (Excess)
The use of plastic/epoxy material ensures durability and reliability of the product.
Surface mount technology allows for easy and convenient installation on PCBs.
With a high maximum supply voltage, this IC can be used in a variety of applications without risk of damage.
The rectangular package shape makes the IC easy to handle and integrate into existing circuit designs.
The 16 terminals provide ample connectivity options for complex circuit configurations.
The small outline package style helps save space on the PCB, making it ideal for compact designs.
The low minimum supply voltage ensures compatibility with a wide range of power sources.
The high maximum operating temperature allows for use in demanding industrial applications.
The low minimum operating temperature ensures reliable performance even in harsh environments.
The matte tin finish provides a reliable connection and prevents corrosion over time.
The dual terminal position allows for flexibility in PCB layout and connectivity options.
The low seated height makes this IC suitable for applications with height constraints.
The compact width of the IC saves space on the PCB, making it suitable for designs with limited real estate.
The high peak reflow temperature ensures proper soldering and secure connections during assembly.
The length of the IC is optimized for efficient use of PCB space, enhancing overall design flexibility.
The industrial temperature grade ensures reliable performance in harsh operating conditions.
The gull wing terminal form provides a secure connection and ease of soldering during assembly.
The nominal supply voltage ensures compatibility with standard power sources in various applications.
The small terminal pitch allows for precise connections and efficient use of board space.
The MSL 3 rating indicates the IC can withstand moderate levels of moisture during storage and handling.
This IC is specifically designed for interface circuit applications, ensuring optimal performance in such scenarios.
Other Function Interface ICs ADUM5404CRWZRL attributes and parameters. Explore more Other Function Interface ICs devices from Analog Devices
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
ADUM5404CRWZRL Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - 8L/16L SOIC_N 15/Jun/2016
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
Microchip Technology
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358D-T
Philips Semiconductors
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
FOD8332V
Onsemi
INTERFACE CIRCUIT; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;
ISO7720QDRQ1
Texas Instruments
ISO7720QDRQ1 by Texas Instruments is a digital isolator with 2 channels, operating at -40 to 125°C. It has a supply voltage range of 2.25-5.5V and comes in an automotive-grade package with nickel palladium gold terminals. Ideal for applications requiring high reliability in harsh environments like automotive electronics.
ISO7241CDW
ISO7241CDW by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It has a supply voltage range of 3.3-5V and features CMOS technology. Ideal for automotive applications, it comes in a small outline package with dual terminals and nickel palladium gold finish.
SI8660BA-B-IS1
Silicon Labs
Silicon Labs' SI8660BA-B-IS1 is a digital isolator with 16 terminals, operating voltage range of 2.375V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, dual terminal position, and small outline package style suitable for high-temperature environments up to 125°C.
ISO7731FQDWRQ1
ISO7731FQDWRQ1 by Texas Instruments is an AEC-Q100 compliant interface IC with 3 functions, operating at -40 to 125°C. It has a supply voltage range of 2.25-5.5V and features a small outline package suitable for automotive applications. The CMOS technology, GULL WING terminals, and nickel/palladium/gold finish make it ideal for various automotive interface circuit designs.
SI8641BD-B-IS2R
SI8641BD-B-IS2R by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package for various interface applications.
ISO7242CDW
ISO7242CDW by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It features a supply voltage range of 3.3V to 5V and comes in a small outline package suitable for automotive applications. The IC uses CMOS technology, has a moisture sensitivity level of 2, and offers dual-terminal position with nickel palladium gold finish.
LTC6957IMS-3#PBF
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: TSSOP; Package Shape: RECTANGULAR;
ADUM7440ARQZ
Analog Devices
ADUM7440ARQZ by Analog Devices is a small outline IC with 16 terminals, operating b/w -40 to 105°C. It has a supply voltage range of 3-5.5V and uses CMOS technology for industrial applications requiring interface circuit functionality.
ISO7741QDWWQ1
ISO7741QDWWQ1 by Texas Instruments is a 4-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 2.25-5.5V, it comes in a small outline package with dual terminals and nickel/palladium/gold finish.
PCA9306AMUTCG
PCA9306AMUTCG by Onsemi is an 8-terminal interface IC in a square chip carrier package. It operates b/w -55 to 125°C, with peak reflow temperature of 260°C for military-grade applications. With nickel gold palladium finish, it's ideal for various function interface circuits.
LSF0108PWR
LSF0108PWR by Texas Instruments is an 8-bit interface IC with a supply voltage range of 1V to 5.5V, suitable for automotive applications. It features open-drain output and operates in temperatures from -40°C to 125°C. This small outline IC has a dual-terminal position and matte tin finish, making it ideal for surface-mount designs.
SI8642ED-B-IS2R
SI8642ED-B-IS2R by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package with 16 terminals and Gull Wing terminal form. Ideal for applications requiring high-speed data isolation in compact designs.
ADM3260ARSZ-RL7
ADM3260ARSZ-RL7 by Analog Devices is a small outline interface IC with 20 terminals, operating at -40 to 105°C. It has a supply voltage range of 3-5.5V and matte tin terminal finish. Ideal for industrial applications requiring reliable communication in compact spaces.
ISO7021FDR
ISO7021FDR by Texas Instruments is a dual-channel interface IC with CMOS technology. It operates b/w -55 to 125°C, suitable for military-grade applications. With a supply voltage range of 1.71V to 5.5V, it comes in a small outline package ideal for surface mount assembly.
ISO7741DW
ISO7741DW by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. Ideal for military-grade applications requiring interface circuitry in compact spaces due to its small outline package style.
ISO7221ADRG4
ISO7221ADRG4 by Texas Instruments is a dual-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 3.3V to 5V and small outline package style, it's ideal for various function interface circuits.
MAX7301ATL+
Maxim Integrated
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
ISO7761QDWQ1
ISO7761QDWQ1 by Texas Instruments is a CMOS digital isolator with 6 channels, AEC-Q100 screening for automotive use. It operates b/w -40 to 125 °C with a supply voltage range of 2.25-5.5 V, in a small outline package suitable for surface mount applications.
LSF0102DCTR
LSF0102DCTR by Texas Instruments is a small outline, low profile interface IC with 2 bits. It operates b/w -40 to 125°C and has a supply voltage range of 1-5.5V. Ideal for automotive applications due to its nickel/palladium/gold terminal finish and open-drain output characteristics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADUM1201ARZ
ADUM1201ARZ by Analog Devices is a dual-function interface IC with 2 functions, operating at 2.7-5.5V, ideal for industrial applications. It comes in a small outline package with 8 terminals and CMOS technology, suitable for surface mount assembly up to 260°C peak reflow temperature.
ADUM1201ARZ-RL7
ADUM1201ARZ-RL7 by Analog Devices is a dual-function interface IC with 2 functions, operating at 2.7V to 5.5V supply voltage range. It comes in a small outline package suitable for industrial applications requiring -40°C to 105°C temperature range and CMOS technology. Ideal for surface mount designs needing a compact solution with matte tin finish terminals.
ADUM1250ARZ
ADUM1250ARZ by Analog Devices is an 8-terminal interface IC with a supply voltage range of 3V to 5.5V, operating temperature from -40°C to 105°C, and CMOS technology. It is designed for industrial applications requiring small outline packages and dual terminal positions, suitable for surface mount assembly in various electronic devices.
ADUM1250ARZ-RL7
ADUM1250ARZ-RL7 by Analog Devices is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating from -40°C to 105°C. It features a small outline package and CMOS technology, suitable for industrial applications requiring interface circuitry in compact designs.
ADUM1301ARWZ
ADUM1301ARWZ by Analog Devices is a 16-terminal IC with 3 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages with gull wing terminals.
ADUM4160BRWZ-RL
ADUM4160BRWZ-RL by Analog Devices is a 16-terminal IC with max supply voltage of 3.6V and operating temp range from -40 to 105°C. Ideal for industrial applications requiring interface circuitry in compact form factor, utilizing CMOS technology for reliable performance.
ADUM5401ARWZ-RL
ADUM5401ARWZ-RL by Analog Devices is a 16-terminal IC with supply voltage range of 3V to 5.5V, operating temperature from -40°C to 105°C. It is used as an interface circuit in industrial applications due to its small outline package and dual terminal position.
ADUM1201BRZ
ADUM1201BRZ by Analog Devices is a dual-function interface IC with 2 functions, operating voltage range of 2.7V to 5.5V, and industrial temperature grade. It comes in a small outline package with matte tin finish, suitable for various interface circuit applications requiring reliable performance in harsh environments.
ADUM1401BRWZ-RL
ADUM1401BRWZ-RL by Analog Devices is a 16-terminal IC with 4 functions. It operates b/w -40 to 105°C, supporting EIA-232, EIA-422, and EIA-485 interfaces. With a supply voltage range of 2.7V to 5.5V, it's ideal for industrial applications requiring reliable interface circuitry in compact spaces.
ADUM1401ARWZ
ADUM1401ARWZ by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105 °C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packaging and CMOS technology.
ADUM1400CRWZ-RL
ADUM1400CRWZ-RL by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages with dual terminal positions.
ADUM1402CRWZ
ADUM1402CRWZ by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packaging and CMOS technology.
ADUM4160BRWZ
ADUM4160BRWZ by Analog Devices is a small outline interface IC with 16 terminals and a max seated height of 2.65 mm. It has a temperature grade of industrial and uses CMOS technology. This IC is commonly used in various applications requiring an interface circuit for other functions.
ADUM3160BRWZ
ADUM3160BRWZ by Analog Devices is a digital isolator with 16 terminals, operating b/w -40 to 105°C. It has a supply voltage range of 3-5.5V and uses CMOS technology. Ideal for industrial applications requiring high temperature tolerance and signal isolation in compact designs.
ADUM5401ARWZ
ADUM5401ARWZ by Analog Devices is a small outline interface IC with 16 terminals. It operates at a supply voltage range of 3V to 5.5V and has an industrial temperature grade of -40°C to +105°C. This IC is commonly used in various applications requiring reliable signal isolation and interface circuitry.
ADUM1402BRWZ-RL
ADUM1402BRWZ-RL by Analog Devices is a digital isolator with 16 terminals, operating voltage range of 2.7V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, dual terminal position, and matte tin finish suitable for surface mount assembly in small outline packages. With an operating temperature range from -40°C to 105°C, it is ideal for high-reliability industrial and automotive electronics requiring isolation functions.
ADUM1401CRWZ
ADUM1401CRWZ by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages and dual terminal positions.
ADUM1401ARWZ-RL
ADUM1401ARWZ-RL by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages with dual terminal positions.
ADUM1201BRZ-RL7
ADUM1201BRZ-RL7 by Analog Devices is a dual-function interface IC with 2 functions, operating voltage range of 2.7V to 5.5V, and industrial temperature grade up to 105°C. It is designed for applications requiring small outline package style and surface mount technology, suitable for various interface circuit requirements in electronic systems.
ADUM5000ARWZ
ADUM5000ARWZ by Analog Devices is a small outline interface IC with 16 terminals and a max seated height of 2.65 mm. It has a temperature grade suitable for industrial applications and uses gull wing terminal form.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved