Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-9610-3 is an RF SMA connector with 0.11 dB insertion loss, gold termination finish, and 12.4 GHz max operating frequency. Ideal for commercial applications requiring a 50 ohm characteristic impedance, it features a threaded coupling type and PTFE insulator material for reliable performance in panel mount installations.
Median Price
$38.170
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$15.170
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$37.240
$33.570
RS Americas
$39.100
Verical
$51.753
$45.258
Master Electronics
$67.750
$35.250
Powell Electronics
$35.410
$25.160
Electro Sonic
$35.040
$28.050
$27.490
IBS Electronics
$67.811
$47.208
Vyrian
VNN
Electronic Expediters
American Connector Supply Corp
Microwave Components, LLC
Nova Conductors
DF Sales Co.
Resion
Odi Ramu Company
Electronics Depot
Ampacity Inc.
$7.040
Gateway Technologies
$8.000
$7.120
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
Allen Electronics Distributors
$29.180
Argo Parts USA
Glotronic Ltd.
Netroflash
Continental Prestige Electronics
Perfect Parts
Allows for easy installation and secure mounting of the connector on a panel, ensuring stability and reliability in use.
Low insertion loss ensures minimal signal degradation, making it ideal for high-frequency applications where signal integrity is crucial.
Gold finish provides excellent conductivity and corrosion resistance, resulting in reliable and durable connections.
Compact body depth allows for space-saving installations, making it suitable for applications where size constraints are a concern.
Threaded coupling ensures a secure connection, preventing accidental disconnection and enhancing the overall reliability of the connector.
Polytetrafluoroethylene insulator provides excellent electrical insulation and high temperature resistance, ensuring stable performance in various environments.
Gold shell finish enhances conductivity and corrosion resistance, contributing to long-term reliability and performance of the connector.
RF SMA connector is a widely used standard in RF applications, ensuring compatibility and versatility in various system designs.
Supports both cable and panel mounting options, providing flexibility in installation and integration into different systems.
Matches the standard impedance requirement for high-frequency applications, enabling efficient signal transmission and minimizing reflections.
Stainless steel shell offers excellent durability and resistance to environmental factors, ensuring a long service life for the connector.
Crimp solder termination provides a reliable and robust connection method, offering ease of installation and high mechanical strength.
Female contact gender allows for mating with male connectors, enabling versatile connectivity options in system designs.
Jack body or shell style is commonly used for audio and RF connectors, providing a secure and easily recognizable interface for mating.
Straight mounting style simplifies installation and alignment of the connector, making it suitable for various applications and system configurations.
Coaxial contact style ensures efficient signal transmission with minimal losses, making it ideal for high-frequency and RF applications.
High maximum operating frequency allows for reliable performance in demanding high-frequency applications, meeting the needs of modern communication systems.
Commercial-grade reliability ensures consistent performance in various commercial applications, making this connector a dependable choice for different industries.
SSMA Connectors 901-9610-3 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
901-9610-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
1554216002
Molex
WIRE AND CABLE;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Baneasa S A
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
Bytesonic Electronics
Multicomp Pro
Promax-johnton
63012242124506
Wuerth Elektronik & Kg
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1052422-1
TE Connectivity
TE Connectivity's 1052422-1 is an RF SMA connector with a threaded coupling type, PTFE insulator material, and stainless steel shell. With a 50 ohm impedance, it operates from -65 to 125°C and has an insertion force of 13.344N. Ideal for commercial applications up to 18GHz requiring high insulation resistance and low contact resistance.
1045496-1
TE Connectivity's 1045496-1 SSMA Connector features threaded coupling, gold termination finish, and PTFE insulator. With a frequency up to 38 GHz, it is ideal for RF applications requiring a 50 ohm impedance. The connector is designed for use with RG 196 and RG 178 cables in high-frequency environments.
142-9701-201
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: BOARD; Maximum Operating Frequency: 18 GHz;
142-9701-301
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Coupling Type: THREADED; Mounting Style: RIGHT ANGLE;
R125.091.000
Radiall S A
Radiall S A's R125.091.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.2 dB Insertion Loss, and Gold (Au) Termination Contact Finish. Ideal for RF applications up to 12.4 GHz with a durability of 500 cycles, this connector has a temperature range from -65°C to 165°C and a Voltage Standing Wave Ratio of 1.4.
M39012/80-3107
TE Connectivity's M39012/80-3107 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.05 dB Insertion Loss, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for RF applications up to 12.4 GHz with MIL-C-39012 reliability standard compliance.
930-124J-51S
Amphenol
Amphenol 930-124J-51S is a SSMA RF connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for applications up to 6 GHz, it features a female jack body style suitable for panel mounting with cable assembly option.
2950-6081
Sv Microwave
2950-6081 by Sv Microwave is an RF SMA connector with a characteristic impedance of 50 ohm and max operating frequency of 18 GHz. It features a dielectric withstand voltage of 1400VAC, insulation resistance of 5Gohm, and operates in temperatures ranging from -65 to 165 °C. Ideal for panel mounting applications requiring durable connectors with gold shell finish.
142-4701-801
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Characteristic Impedance: 50 ohm; JESD-609 Code: e4;
142-1701-201
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Panel Mount: YES; Filter Feature: NO;
M39012/56-3030
Winchester Interconnect
M39012/56-3030 by Winchester Interconnect is a SSMA connector with a body length of 0.7" and depth of 1.04". It has a snap coupling type and is made of stainless steel. This RF SMA connector operates at a max frequency of 12.4 GHz and is commonly used in cable applications for its crimp termination and 50 ohm characteristic impedance.
901-9602-3SF
Amphenol 901-9602-3SF is an RF SMA connector with 0.11 dB insertion loss, gold termination contact finish, and threaded coupling type. It has a max operating frequency of 12.4 GHz and is ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
R124.172.123W
R124.172.123W by Radiall S A is an RF SMA CONNECTOR with 50 ohm impedance, 750VAC dielectric voltage, and 12.4 GHz operating frequency. It is used in commercial applications requiring high durability and a temperature range of -65 to 165 °C, suitable for RG-316 cables with POLYTETRAFLUOROETHYLENE insulator material.
R124.426.123
Radiall S A's R124.426.123 SSMA Connector features 0.21 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 18 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and FEMALE contact gender.
132255-12
Amphenol 132255-12 is a SSMA connector with 50 ohm impedance, gold finish, and 18 GHz frequency. It is used in RF applications requiring high dielectric voltage withstand capability up to 1400VAC. This straight jack connector has a brass shell and PTFE insulator for surface mount board termination.
9001-9023-003
Radiall S A's 9001-9023-003 SSMA Connector features 0.07 dB Insertion Loss, 1.4 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 18 GHz with THREADED coupling, POLYTETRAFLUOROETHYLENE insulator, and CRIMP termination.
73251-1150
Molex 73251-1150 is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.04 dB insertion loss. Ideal for RF applications up to 18 GHz, featuring gold nickel termination contact finish and PTFE insulator material. Suitable for commercial use with 50 ohm impedance and 1.06 VSWR.
142-0701-491
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1051664-1
1051664-1 by TE Connectivity is an RF SMA CONNECTOR with 50 ohm impedance, PTFE insulator, and gold shell finish. It has a max operating frequency of 12.4 GHz and is suitable for RG 174 cable termination in commercial applications at temperatures ranging from -65 to 165 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-9875
Amphenol 901-9875 is an RF SMA connector with threaded coupling, gold termination, and PTFE insulator. It offers low insertion loss of 0.25 dB and VSWR of 1.51 up to 18 GHz. Ideal for panel and cable mounting applications requiring a 50 ohm impedance connection.
901-9511-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm; Insertion Loss: .11 dB;
901-9601-3
Amphenol's 901-9601-3 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.11 dB and can operate at frequencies up to 12.4 GHz. This connector is commonly used in cable applications requiring a 50 ohm characteristic impedance.
901-9511-12SF
Amphenol 901-9511-12SF SSMA Connector features 0.11 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz, with POLYTETRAFLUOROETHYLENE insulator material and 50 ohm impedance. Suitable for cable mounting with CRIMP SOLDER termination type.
901-9210-2
Amphenol 901-9210-2 is an RF SMA connector with 0.13 dB insertion loss, 1.14 VSWR, and 18 GHz max operating frequency. It features gold termination finish, PTFE insulator, and stainless steel shell for RG-405 cable applications in commercial reliability settings.
901-9877-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm;
901-9511-3SF
Amphenol 901-9511-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.51 VSWR. It is used in commercial applications at frequencies up to 12.4 GHz for reliable signal transmission in high-temp environments.
901-9876-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; MIL Conformity: NO; Mounting Style: STRAIGHT;
901-9511-1
Amphenol 901-9511-1 SSMA Connector features 0.11 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 12.4 GHz with 50 ohm impedance. Suitable for cable mounting with crimp solder termination and male contact gender.
901-9723
Amphenol 901-9723 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 26.5 GHz with 50 ohm impedance. Suitable for commercial use with durability of 100 cycles.
901-9531-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG; Mounting Type: CABLE;
901-9511-3SFC
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Termination Type: CRIMP; Characteristic Impedance: 50 ohm;
901-9531-3SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; JESD-609 Code: e4;
901-9511-2
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulator Material: POLYTETRAFLUOROETHYLENE;
901-9531-3
Amphenol 901-9531-3 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 12.4 GHz operating frequency. Ideal for RG-316 cables in commercial applications due to its durable stainless steel shell, gold finish, and PTFE insulator material.
901-9602-3
Amphenol's 901-9602-3 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 12.4 GHz and is commonly used in cable applications for its low insertion loss (0.11 dB) and gold termination contact finish.
901-9531-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: COAX; No. of Ports: 1;
901-9531-12SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Material: NOT SPECIFIED;
901-9602-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP SOLDER; Body or Shell Style: JACK; Mounting Type: CABLE;
901-9184-CCSF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved