Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 0732512201 is an RF SMA CONNECTOR with THREADED coupling. Featuring 50 ohm impedance, it has FEMALE contact gender and RIGHT ANGLE mounting style. Ideal for BOARD mounting in applications requiring SSMA Connectors like JACK body style with SOLDER termination.
Median Price
$9.650
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$8.754
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$8.799
$7.174
$6.960
TTI
$10.500
$10.050
$8.820
$7.800
Verical
$14.851
$10.730
$9.579
Arrow
$14.911
$10.774
$9.618
TTI Europe
$7.018
$6.182
Digiode
$7.619
Vyrian
Electronics Depot
Bristol Electronics
Resion
Corphita
$7.218
Glotronic Ltd.
Argo Parts USA
Perfect Parts
Authorized Procurement Solutions
Bastille Electronics
Allows for secure and reliable connections, ideal for applications requiring stability.
Ensures compatibility with various RF devices, making it versatile for different setups.
Provides a convenient and stable solution for connecting to circuit boards, suitable for electronics integration.
Offers optimal signal transmission and minimizes signal distortion, ensuring high performance.
Allows for easy and durable soldering connections, ensuring long-lasting performance.
Compatible with male connectors, offering flexibility in building a wide range of connections.
Provides a secure and sturdy housing for the connector, ensuring durability and reliability.
Ideal for installations with limited space or specific orientation requirements, offering flexibility in design.
SSMA Connectors 0732512201 attributes and parameters. Explore more SSMA Connectors devices from Molex
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
0732512201 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Hy Electronic
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Signetics
Nte Electronics
Sangdest Microelectronics (Nanjing)
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Intersil
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CONREVSMA003.031
Linx Technologies
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
16SMA-50-2-100/199NH
Huber+suhner Ag
16SMA-50-2-100/199NH by Huber+suhner Ag is an RF SMA connector with a threaded coupling type. It has an insertion loss of 0.5 dB and operates at frequencies up to 26.5 GHz. Ideal for commercial applications requiring a durable, right-angle plug with a characteristic impedance of 50 ohm.
0732510450
Molex
Molex 0732510450 is an RF SMA connector with threaded coupling, 50 ohm impedance, and crimp termination. Ideal for cable mounting applications requiring a male plug with straight mounting style in SSMA connectors category.
R125.176.001
Radiall S A
The Radiall S A R125.176.001 SSMA Connector features 0.53 dB insertion loss, 1.4 VSWR, and 12.4 GHz max operating frequency. Ideal for RF applications requiring threaded coupling, right angle mounting, and 50 ohm impedance with male contact gender in cable termination setups.
901-9602-3SF
Amphenol
Amphenol 901-9602-3SF is an RF SMA connector with 0.11 dB insertion loss, gold termination contact finish, and threaded coupling type. It has a max operating frequency of 12.4 GHz and is ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
142-0701-871
Bel Fuse
The Bel Fuse 142-0701-871 is an RF SMA connector with a dielectric voltage of 1400VAC, impedance of 50 ohm, and operating frequency up to 18 GHz. It is used in commercial applications requiring durable connectors for board mounting with a right-angle style.
135100-01-36.00
RF SMA CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
24-0080-0400D
Phoenix Contact
RF SMA/SSMA Connectors; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Insertion Loss: .2 dB; Voltage Standing Wave Ratio: 1.35;
1045677-1
TE Connectivity
TE Connectivity's 1045677-1 is an RF SSMA connector with 50 ohm impedance, PTFE insulator, and gold finish. Ideal for commercial applications up to 38 GHz, it features a threaded coupling type and stainless steel shell material for reliable performance in temperatures ranging from -65 to 165°C.
R125.252.000
R125.252.000 by Radiall S A is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.13 dB, suitable for applications up to 18 GHz. Featuring a threaded coupling type, gold shell finish, and PTFE insulator material, it offers durability with 500 cycles and insulation resistance of 5 Gohm. Ideal for panel mounting in commercial settings with operating temperatures ranging from -65 to 105°C.
M39012/55-3026
TE Connectivity's M39012/55-3026 SSMA Connector features 50 ohm impedance, 0.06 dB insertion loss, and 1.15 VSWR. Ideal for RF applications up to 12.4 GHz, it has a threaded coupling type and stainless steel shell material for durability in harsh environments. With MIL conformity and crimp termination, this connector is suitable for high-frequency cable connections.
1052523-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE; Maximum Operating Frequency: 18 GHz;
142-0701-851
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Coupling Type: THREADED; Insulator Material: POLYTETRAFLUOROETHYLENE;
132102
Amphenol 132102 is an RF SMA connector with threaded coupling, MIL conformity, and 0.14 dB insertion loss. Made of PTFE insulator material, it has a VSWR of 1.14 and operates up to 18 GHz. Ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting with solder termination in male plug configuration.
3-1478978-1
TE Connectivity's 3-1478978-1 RF SMA Connector features a 0.532" body length, 0.398" body width, and 0.397" body depth. With an insertion loss of 0.1 dB, it is ideal for applications requiring a 50 ohm characteristic impedance and operating frequencies up to 6 GHz. The connector has a durability of 500 cycles and can withstand temperatures from -65°C to 165°C.
11_SMA-50-3-100/111_NE
11_SMA-50-3-100/111_NE by Huber+suhner Ag is a RF SMA CONNECTOR with gold-plated contacts, suitable for applications up to 26.5 GHz. Featuring a threaded coupling type and durable beryllium copper shell, it offers a characteristic impedance of 50 ohm. Ideal for commercial use in cable assemblies requiring reliable signal transmission at temperatures ranging from -65 to 165 °C.
M39012/93-3001
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-C-39012; Mounting Type: BOARD; Mounting Style: STRAIGHT;
1051113-1
TE Connectivity's 1051113-1 SSMA Connector features a 0.675" body length, 5000000000 ohm insulation resistance, and 0.21 dB insertion loss. Ideal for RF applications with RG 405 cable types, this threaded connector has a max operating frequency of 18 GHz and operates b/w -65 to 165 °C.
1062177-1
TE Connectivity's 1062177-1 is an RF SMA connector with a threaded coupling type, ideal for RG-188 cables. Featuring a dielectric voltage of 1050VAC and impedance of 50 ohm, it offers low insertion loss at 0.06 dB. With a wide operating temperature range (-55 to 125 °C), it suits commercial applications requiring reliable signal transmission up to 18 GHz.
1051651-1
TE Connectivity's 1051651-1 SSMA Connector features a body length of 1.187", insertion loss of 0.21 dB, and insulation resistance of 10^10 ohm. Ideal for RF applications with RG 142 cable types, it operates b/w -65 to 165 °C with a max frequency of 12.4 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Mounting Style: STRAIGHT; Contact Material: NOT SPECIFIED;
0732512200
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Maximum Operating Frequency: 18 GHz;
0732510031
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; Panel Mount: NO;
0732510051
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Coupling Type: THREADED; DIN Conformance: NO;
0732510131
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Filter Feature: NO; Mounting Type: CABLE;
0732510140
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Contact Material: NOT SPECIFIED;
0732510151
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Characteristic Impedance: 50 ohm; Additional Features: APPLICABLE CABLES: RG 174, RG 187, RG 188, RG 316;
0732510180
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Contact Material: NOT SPECIFIED; DIN Conformance: NO;
0732510240
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Termination Contact Finish: NOT APPLICABLE;
0732510250
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Gold/Nickel (Au/Ni); JESD-609 Code: e4; Contact Material: BERYLLIUM COPPER;
0732510270
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: STRAIGHT; Panel Mount: YES;
0732510730
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Termination Type: SOLDER;
0732510930
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
0732511900
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Coupling Type: THREADED; Characteristic Impedance: 50 ohm;
0732511960
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Termination Type: CRIMP; Body or Shell Style: JACK;
0732512170
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm; IEC Conformity: NO;
0732512340
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; Mounting Type: CABLE;
0732513100
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Termination Type: SOLDER; Body or Shell Style: PLUG;
0732513120
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Additional Features: APPLICABLE CABLE: RG 178; Coupling Type: THREADED;
0732513490
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Termination Type: SOLDER; Mounting Type: CABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved