Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-143 is an RF SMA connector with 0.13 dB insertion loss, 1.25 VSWR, and 50 ohm impedance. It features gold termination finish, PTFE insulator, and steel shell for board mounting applications up to 18 GHz frequency.
Median Price
$21.155
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$12.207
100+ parts
$9.988
1k+ parts
10k+ parts
-
Powell Electronics
$12.280
$11.300
$8.760
TTI
$24.450
$21.800
$16.160
$15.990
DigiKey
$25.150
$18.173
$16.224
Mouser Electronics
$22.580
Master Electronics
$42.360
$23.150
$20.660
Chip1Stop
$17.860
Arrow
$17.250
Verical
DF Sales Co.
$7.000
Freelance Electronics
$11.547
$12.124
$11.432
TEDSS.com
$16.500
TestEquity
$23.790
TME
$25.440
IBS Electronics
$35.503
$22.464
$21.216
VNN
MISTER SPROCKETS
ACDS - Activité Composants Distribution Service
Dan-Mar Components
American Connector Supply Corp
Inventory MP
Sogenti Electronics
Sensible Micro Corp
Lantek
Speed Components Ltd
Prism Electronics
SPM Sales
Standard Data Resources
Nova Conductors
Beltway Electronics Company
QIE Inc.
Bristol Electronics
Electronics Depot
Inland Empire Components Inc.
FDH Electronics
South Electronics
NexGen Digital
Electronic Expediters
Van Brakel Electronic
Gateway Technologies
$12.730
$11.329
Singapore Electronics
$14.003
$13.022
$12.462
$11.902
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Glotronic Ltd.
Kepictronics
Netroflash
Resion (Excess)
Low insertion loss ensures that signal strength is maintained, making this connector ideal for high-frequency applications.
Gold finish provides excellent conductivity and corrosion resistance, ensuring a reliable connection over time.
Compact body depth allows for space-saving installation in tight spaces.
Threaded coupling provides secure mating, preventing accidental disconnection in high-vibration environments.
PTFE insulator material offers excellent electrical insulation properties and high temperature resistance, ensuring stable performance.
Gold shell finish enhances conductivity and provides a premium appearance.
RF SMA connector is widely used in RF applications and provides a standard interface for seamless connectivity.
Low VSWR indicates efficient power transfer and minimal signal reflection, ensuring optimal performance.
Board mounting option allows for easy installation on circuit boards, making it suitable for PCB integration.
50 ohm impedance matches standard RF systems, minimizing signal loss and ensuring compatibility with various components.
Steel shell material provides durability and mechanical strength, suitable for rugged environments.
Solder termination offers a secure and reliable connection for consistent performance.
Female contact gender allows for easy mating with standard male connectors, ensuring compatibility.
Receptacle style allows for easy connection and disconnection, making it convenient for testing and maintenance.
Right-angle mounting style saves space and provides a convenient orientation for cable routing.
Coaxial contact style ensures proper signal transmission and minimizes interference for high-quality performance.
Low insertion force simplifies the mating process and reduces the risk of damaging the connector during installation.
Optimal terminal length provides a secure connection and minimizes signal loss.
Locking mounting option ensures a secure connection that remains stable even under vibration or mechanical stress.
High operating frequency capability makes this connector suitable for demanding RF applications.
Commercial reliability ensures consistent performance and durability for various commercial applications.
SSMA Connectors 901-143 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insertion Loss:
Insulator Material:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
901-143 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Won-top Electronics
Yangzhou Yangjie Electronics
R125.464.270W
Radiall S A
R125.464.270W by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.07 dB insertion loss, and 18 GHz operating frequency. Ideal for panel mounting in commercial applications, it offers high durability with a gold shell finish and can withstand temperatures from -65 to 165 °C.
142-1701-206
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Manufacturer Series: SMA; JESD-609 Code: e4;
142-0307-411
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE; Coupling Type: THREADED; JESD-609 Code: e4;
SPC20113
SPC TECHNOLOGY/ MULTICOMP
Spc Technology/ Multicomp's SPC20113 is a RF SMA CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, GOLD finish, and 50 ohm impedance. Ideal for BOARD mounting in commercial applications, it features FEMALE contact gender and JACK body style for reliable connectivity.
R124.172.123
R124.172.123 by Radiall S A is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.18 dB, suitable for applications up to 12.4 GHz. Featuring gold termination contact finish and brass shell material, it offers high durability with 100 cycles and operates in temperatures ranging from -65 to 165 °C.
1052963-1
TE Connectivity
TE Connectivity's 1052963-1 is an SSMA connector with a threaded coupling type and panel mount capability. It features a polytetrafluoroethylene insulator material, beryllium copper contact material, and a gold mating contact finish. This RF SMA connector is commonly used in applications with a max operating frequency of 12.4 GHz.
132118
Amphenol
Amphenol 132118 is an RF SMA connector with a threaded coupling type, gold termination finish, and PTFE insulator. It has an insertion loss of 0.14 dB, withstands up to 1400VAC, and operates b/w -65 to 165°C. Ideal for RG-58 cables in applications requiring high durability and reliability at frequencies up to 12.4 GHz.
142-0203-101
Bel Fuse
Bel Fuse's 142-0203-101 is an SSMA connector with a max operating frequency of 12.4 GHz. It has a characteristic impedance of 50 ohm and can withstand temperatures from -65 to 165 °C. This RF SMA connector, made of brass, is commonly used in commercial applications requiring high durability and reliability.
32K145-400L5
Rosenberger Hochfrequenztechnik & Kg
The Rosenberger SSMA Connector 32K145-400L5 features a low insertion loss of 0.17 dB and high VSWR of 1.3, suitable for RF applications up to 18 GHz. With a threaded coupling type and PTFE insulator, it is ideal for board and panel mounting in temperature ranges from -55°C to 155°C. This female jack connector has a characteristic impedance of 50 ohms, making it versatile for various RF applications.
CONSMA003.062
Linx Technologies
Linx Technologies' CONSMA003.062 is a SSMA RF SMA connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for board and panel mounting in applications requiring reliable signal transmission, such as telecommunications and wireless networking.
PL80-7
Trompeter Electronics
RF C CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Mounting Style: STRAIGHT; Termination Contact Finish: NICKEL;
M39012/94-3003
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: M39012/94; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE;
930-124J-51S
Amphenol 930-124J-51S is a SSMA RF connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for applications up to 6 GHz, it features a female jack body style suitable for panel mounting with cable assembly option.
132203-14
Amphenol 132203-14 is a SSMA connector with gold shell finish, PTFE insulator, and brass shell material. It features right-angle mounting, solder termination, and coax contact style. Ideal for commercial applications requiring board or panel mounting with locking option for secure connections.
M39012/55-3009
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Termination Contact Finish: GOLD; Characteristic Impedance: 75 ohm;
1051638-1
TE Connectivity's 1051638-1 SSMA Connector features a body length of 1.187", insertion loss of 0.21 dB, and threaded coupling type. Ideal for RF applications up to 12.4 GHz, with TFE insulator material, gold shell finish, and 50 ohm impedance. Suitable for cable mounting with solder termination in male plug style configuration.
142-0701-201
Bel Fuse's 142-0701-201 is an RF SMA connector with a characteristic impedance of 50 ohm and dielectric voltage of 1400VAC. With a durability of 500 cycles, it is ideal for commercial applications requiring high insulation resistance and operating temperatures ranging from -65 to 165°C.
142-0701-851
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; IEC Conformity: NO; Mounting Style: STRAIGHT;
1052522-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Body or Shell Style: RECEPTACLE; Filter Feature: NO;
M39012/59-3009
TE Connectivity's M39012/59-3009 SSMA Connector features 50 ohm impedance, 0.06 dB insertion loss, and 1.15 VSWR. Ideal for RF applications up to 12.4 GHz, it has a threaded coupling type and PTFE insulator material. With MIL conformity and gold shell finish, this connector is reliable for commercial use in temperatures ranging from -65 to 165°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-144-8RFX
Amphenol 901-144-8RFX is an RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and brass shell for durability in high-temp environments.
901-143-6RFX
Amphenol 901-143-6RFX is an SSMA connector with gold termination, PTFE insulator, and 50 ohm impedance. It operates b/w -65 to 165 °C, has 0.13 dB insertion loss, and can handle up to 18 GHz frequency. Ideal for RF applications requiring high durability and low VSWR.
901-10510-2
Amphenol's 901-10510-2 is an RF SMA connector with a threaded coupling type. It has a max operating frequency of 26.5 GHz and can withstand temperatures ranging from -65 to 165°C. This connector, suitable for board mounting, is commonly used in applications requiring high insulation resistance and low contact resistance.
901-144
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Total No. of Contacts: 1;
901-155-16
Amphenol 901-155-16 is an RF SMA connector with a dielectric voltage of 1400VAC, operating from -65 to 165°C. It has a gold finish, brass shell, and PTFE insulator suitable for RG-174/U cables. With a durability of 500 cycles, it's ideal for commercial applications requiring a 50 ohm impedance connection.
901-10025-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .25 dB; Termination Contact Finish: GOLD; MIL Conformity: NO;
901-10385
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: GOLD; Shell Material: BRASS; Voltage Standing Wave Ratio: 1.3;
901-10423
RF SMA CONNECTOR;
901-10512-1
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
901-10029-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 901-10029-RFX; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG;
901-10512-2
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
901-144-3
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
901-10512-3
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
901-144-4
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED;
901-10011
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 12.4 GHz; DIN Conformance: NO; Mounting Type: CABLE;
901-10309
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Shell Finish: GOLD; Contact Style: COAX; Mounting Option-1: LOCKING;
901-10172
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 700VAC; Body Width: .411 inch; Insulator Material: POLYTETRAFLUOROETHYLENE; Insulator Color: NATURAL;
901-10387
RF SMA CONNECTOR; Reliability: COMMERCIAL; Termination Type: SURFACE MOUNT; Voltage Standing Wave Ratio: 1.16; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
901-101-15
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Cable Types: RG-400/U;
901-1GA200000AE
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved