Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 252180 is an RF MCX connector with 0.256" body diameter, gold shell finish, and PTFE insulator. It is used for RG-58A/U cable termination in commercial applications requiring male coax contact style and straight plug mounting.
Median Price
$7.765
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$7.150
100+ parts
$5.370
1k+ parts
$4.450
10k+ parts
-
Powell Electronics
$8.380
$5.390
DigiKey
$9.190
$6.636
$5.641
Encitech
$41.600
Master Electronics
$4.910
$3.420
$3.320
Verical
$5.777
$5.623
Nova Conductors
$5.422
Vyrian
Electro Sonic
$5.990
$4.750
$4.430
IBS Electronics
$6.844
$4.698
$4.642
Sunrise Surplus Inc.
VNN
American Microsemiconductor Inc.
Abianca Electronics
$2.852
$2.738
Ampacity Inc.
$4.820
Gateway Technologies
$4.850
$4.316
Semicontronic
$4.930
$4.807
$4.782
Continental Prestige Electronics
$5.250
$5.145
Aranea Global
$5.313
$5.101
Singapore Electronics
$5.334
$4.960
$4.747
$4.533
Aztec Data Supply Inc.
$5.501
Advanced Electronics
$9.670
$9.186
Argo Parts USA
This compact size allows for easy installation in tight spaces without sacrificing performance.
This high-quality insulator material ensures excellent electrical insulation and durability.
The gold shell finish provides corrosion resistance and enhances signal transmission.
RF MCX connectors are known for their high frequency capability and low signal loss, making them ideal for various applications.
The natural insulator color helps in easy identification and maintenance of the connector.
The cable mounting type offers flexibility and ease of installation.
Beryllium copper is a durable and high-performance material that ensures reliability and longevity.
Compatible with RG-58A/U cable types, ensuring a secure and reliable connection.
Crimp termination provides a secure and reliable connection without the need for soldering.
Male contacts are commonly used for RF connections and offer a secure fit.
The plug style allows for easy and quick connections, making it convenient for various applications.
The straight mounting style offers a streamlined and secure connection.
Coaxial contact style ensures efficient signal transmission and low signal loss.
The locking mounting option provides added security and ensures a stable connection.
Designed for commercial use, offering reliability and performance in a variety of applications.
MCX & MMCX Connectors 252180 attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Body Diameter:
Body or Shell Style:
Cable Types:
Connector Type:
Contact Gender:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
252180 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Baneasa S A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Hy Electronic
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Allegro MicroSystems
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
73415-1251
Molex
Molex 73415-1251 RF MMCX Connector features 0.173" body diameter, 1000000000 ohm insulation resistance, and 0.2 dB insertion loss. Ideal for applications requiring a durable connector with characteristic impedance of 50 ohm, such as RG-316 cable types in high-frequency environments up to 6 GHz.
1-1634010-0
TE Connectivity
TE Connectivity 1-1634010-0 is an RF MMCX connector with characteristic impedance of 50 ohm, operating frequency up to 6 GHz. Featuring PTFE insulation material, it has a durability of 500 cycles and operates in temperatures ranging from -55 to 155 °C. Ideal for board mounting applications requiring high-quality female coax connectors.
135-3402-101
Johnson Components
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mounting Type: CABLE; Characteristic Impedance: 50 ohm;
R113665000
Radiall S A
The Radiall S A R113665000 is a RF MCX connector with 50 ohm impedance, gold termination finish, and snap coupling. Ideal for board and panel mounting applications up to 6 GHz frequency. Features female contact gender and right angle mounting style for versatile connectivity solutions.
1-1634000-0
TE Connectivity 1-1634000-0 is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for RG-174A/U cable termination. Featuring gold shell finish and brass shell material, it operates b/w -55 to 155 °C with max frequency of 6 GHz. Ideal for commercial applications requiring reliable snap coupling in straight mounting configuration.
MCX-J-P-H-RA-SM1
Samtec
Samtec's MCX-J-P-H-RA-SM1 is a RF MCX connector with 50 ohm impedance, GOLD finish, and SNAP coupling. Ideal for applications requiring surface mount termination, right angle mounting, and operating frequency up to 6 GHz.
135-3403-101
Vertiv
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Insertion Loss: .2 dB;
Cinch Connectivity Solutions
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Mounting Type: CABLE;
1-1634009-0
TE Connectivity 1-1634009-0 is a RF MMCX connector with gold finish, 50 ohm impedance, and durability of 500 cycles. It is used in commercial applications for board mounting at temperatures ranging from -65 to 165 °C, offering high insulation resistance and low contact resistance.
73415-0991
Molex 73415-0991 is a SNAP RF MMCX CONNECTOR with POLYTETRAFLUOROETHYLENE insulator. Features 50 ohm impedance, MALE contact gender, and SURFACE MOUNT termination. Ideal for BOARD mounting in MCX & MMCX applications.
85_MMCX-50-0-1/111_OH
Huber+suhner Ag
85_MMCX-50-0-1/111_OH by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It features a right angle mounting style, gold shell finish, and female contact gender. Suitable for board mounting applications, it has a durability of 500 cycles and can operate at temperatures ranging from -55 to 155 °C.
135-3801-201
Bel Fuse
135-3801-201 by Bel Fuse is a RF MMCX connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator, it offers high durability with 500 cycles and can withstand temperatures from -55 to 155 °C. Its compact design (0.136" x 0.136" x 0.186") makes it ideal for board mounting in various electronic devices.
1408148-1
Tyco Electronics Amp
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm; Mating Contact Finish: GOLD;
919-109J-51PX
Amphenol
Amphenol 919-109J-51PX is an RF MCX connector with 0.177" body diameter, 50 ohm impedance, and 6 GHz max frequency. Ideal for commercial applications, it offers low insertion loss of 0.1 dB, high durability with 500 cycles, and a dielectric voltage rating of 1400VAC.
262105
Amphenol 262105 is an RF MMCX connector with SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for board mounting with SOLDER termination in JACK body style. Commonly used in MCX & MMCX applications requiring RIGHT ANGLE mounting.
20449-001E
I-pex
I-pex 20449-001E RF MCX Connector features SNAP coupling, LIQUID CRYSTAL POLYMER insulator, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 6 GHz, such as board-mounted RF connections with male contact gender.
133-3711-317
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; DIN Conformance: NO; IEC Conformity: NO;
73413-0050
Molex 73413-0050 is a RF MCX connector with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring FEMALE contact gender in JACK body style.
133-3711-312
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Insulator Material: POLYTETRAFLUOROETHYLENE; Additional Features: STANDARD: MIL-PRF-39012;
16_MMCX-50-2-13/111_OE
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: GOLD OVER NICKEL; Contact Material: BRASS;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
252102
Amphenol 252102 RF MCX Connector features 0.1 dB insertion loss, gold termination contact finish, and snap coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
252102-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .1 dB; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD;
252107-75
Amphenol 252107-75 is an RF MCX connector with gold termination, beryllium copper contact material, and PTFE insulator. It is used in commercial applications requiring reliable coax connections for male plugs on panels with straight mounting and locking options.
252127
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; DIN Conformance: NO;
252107
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Characteristic Impedance: 50 ohm; DIN Conformance: NO;
252151
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 1 GHZ; Panel Mount: NO; Coupling Type: SNAP;
252103
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Termination Contact Finish: GOLD; Insulator Material: POLYTETRAFLUOROETHYLENE;
252129
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
252109-75
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE; Mounting Type: PANEL;
252115-10
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Depth: .175 inch; Mounting Style: RIGHT ANGLE; Body or Shell Style: PLUG;
252119RP
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; JESD-609 Code: e4; Mounting Type: CABLE;
252196
RF MCX CONNECTOR; Reliability: COMMERCIAL; Mounting Style: RIGHT ANGLE; Contact Material: NOT SPECIFIED; Shell Material: BRASS; Mounting Type: CABLE;
252194-75
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Body or Shell Style: PLUG; Total No. of Contacts: 1;
252103RP
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Cable Types: RG-174/U; Mounting Type: CABLE;
252153-10
RF MCX CONNECTOR; Reliability: COMMERCIAL; Shell Finish: GOLD; Mounting Option-1: LOCKING; Total No. of Contacts: 1; Mounting Type: BOARD;
252153-11
RF MCX CONNECTOR; Reliability: COMMERCIAL; No. of Ports: 1; Body Length: .15 inch; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Option-1: LOCKING;
252167-75
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Panel Mount: YES; Body or Shell Style: JACK;
252199
RF MCX CONNECTOR; Reliability: COMMERCIAL; Mounting Type: CABLE; Termination Type: CRIMP; No. of Ports: 1; Shell Material: BRASS;
252137
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insertion Loss: .1 dB; Additional Features: INSERTION LOSS MAX AT 1 GHZ;
252167
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Ports: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved