Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF MCX CONNECTOR; Reliability: COMMERCIAL; Mounting Type: CABLE; Termination Type: CRIMP; No. of Ports: 1; Shell Material: BRASS;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$4.000
100+ parts
1k+ parts
$3.560
10k+ parts
Singapore Electronics
$4.400
$4.092
$3.916
$3.740
MCX & MMCX Connectors 252199 attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Connector Type:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
252199 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
3610-00-895-8768, 3610008958768, 5340-14-478-4855, 5340144784855
NIIN
008958768, 144784855
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Bytesonic Electronics
Itt Semiconductor
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
133-3711-311
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; MIL Conformity: NO; Termination Type: SURFACE MOUNT;
133-3711-312
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Insulator Material: POLYTETRAFLUOROETHYLENE; Additional Features: STANDARD: MIL-PRF-39012;
1408152-1
Tyco Electronics Elcon
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.25; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD;
73415-1121
Molex
Molex 73415-1121 is a RF MMCX connector with gold nickel finish, brass contact material, and 50 ohm impedance. It features snap coupling, male gender, and right angle mounting style. Ideal for cable termination in MCX & MMCX applications.
73415-1471
Molex 73415-1471 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high durability and operating frequency up to 6 GHz.
82_MMCX-50-0-18/111_OM
Huber+suhner Ag
82_MMCX-50-0-18/111_OM by Huber+suhner Ag is a RF MMCX connector with gold (Au) termination, SNAP coupling, and 50 ohm impedance. Ideal for applications requiring surface mount female connectors up to 6 GHz frequency, such as in telecommunications and wireless networking systems.
RF178-03RP1-SING-0750
Samtec
Samtec RF178-03RP1-SING-0750 is a 50 ohm RF MMCX connector with PTFE insulation, suitable for applications up to 6 GHz. Featuring a 0.157" body length and SNAP coupling, it operates b/w -50°C to 165°C. Ideal for cable termination in high-frequency communication systems.
133-3711-318
Bel Fuse
Bel Fuse 133-3711-318 is an RF MCX connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring a dielectric voltage of 1400VAC, it offers high insulation resistance of 10^10 ohm. This right-angle jack connector has a durable brass shell and PTFE insulator for reliable surface mount board connections.
1-1337584-0
TE Connectivity
TE Connectivity's 1-1337584-0 RF MCX Connector features a body length of 0.173", insertion loss of 0.2 dB, and dielectric voltage withstand of 1400VAC. Ideal for applications requiring a durable, right-angle mounted connector with characteristic impedance of 50 ohm and rated current signal up to 3A at frequencies up to 6 GHz.
829558-2
TE Connectivity's 829558-2 RF MCX Connector has a characteristic impedance of 50 ohm, with a max operating frequency of 6 GHz. Featuring a gold shell finish and PTFE insulator material, it is ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -65 to 125 °C.
73366-0301
Molex 73366-0301 RF MCX Connector with 50 ohm impedance, 1400VAC dielectric voltage, and 6 GHz frequency is ideal for RG-316 cables in commercial applications. Features include PTFE insulation, gold finish, and zinc alloy shell material for durability. Operating temperatures range from -55 to 85°C with a max insertion force of 11.12N.
RF178-03RP1-252535-0100
RF MMCX CONNECTOR; Mating Contact Finish: GOLD; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: GOLD;
1061023-1
TE Connectivity's 1061023-1 RF MCX Connector features a 0.391" body length, 0.1 dB insertion loss, and 50 ohm impedance. Ideal for board mounting in applications requiring a right angle jack with a max frequency of 6 GHz.
R113.182.000
Radiall S A
R113.182.000 RF MCX Connector by Radiall S A features 1.22 dB insertion loss, 50 ohm impedance, and gold-plated contacts with nickel barrier. With a durability of 500 cycles, it is ideal for RG-188 cables in applications requiring a max frequency of 6 GHz such as commercial reliability testing.
MMCX-P-P-H-ST-EM1
Samtec's MMCX-P-P-H-ST-EM1 is a RF MMCX connector with 50 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for commercial applications, it features gold termination finish, PTFE insulator material, and brass shell construction for reliable performance in temperatures ranging from -65 to 125°C.
R110081020
RF MCX/MMCX Connectors;
135-3711-201
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Type: SURFACE MOUNT; Additional Features: INSERTION LOSS MAX AT 1 GHZ;
133-8433-101
Bel Fuse 133-8433-101 is an RF MCX connector with 1.07 VSWR, 0.2 dB insertion loss, and 1400VAC dielectric voltage. Ideal for RG-179 cables in applications requiring a durable, right-angle plug with 75 ohm impedance and PTFE insulator material.
MCX6251B1-3GT30G-50
Amphenol
Amphenol's MCX6251B1-3GT30G-50 RF MCX Connector features GOLD (30) OVER NICKEL finish, POLYTETRAFLUOROETHYLENE insulator, and SNAP coupling. Ideal for BOARD mounting in FEMALE contact gender applications.
R113182000
Radiall S A R113182000 RF MCX Connector features 50 ohm impedance, 1.1 VSWR, and operates up to 6 GHz. With gold-plated contacts and PTFE insulator, it is ideal for high-frequency cable connections in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved