Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 252102 RF MCX Connector features 0.1 dB insertion loss, gold termination contact finish, and snap coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
Median Price
$6.447
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
TTI Europe
1+ parts
$6.017
100+ parts
$5.171
1k+ parts
$4.781
10k+ parts
$4.683
Heilind Electronics
$6.320
$5.097
$4.938
-
Interstate Connecting
$6.574
$5.462
$5.145
Mouser Electronics
$9.080
$7.160
$6.020
Farnell
$9.520
$7.190
$7.010
TTI
$5.250
$5.140
Powell Electronics
$4.850
$4.490
Verical
$6.773
PSC Electronics
Nova Conductors
$5.346
DF Sales Co.
$9.700
VNN
Vyrian
IBS Electronics
$7.854
$5.736
$5.652
American Microsemiconductor Inc.
Inventory MP
Bristol Electronics
Ampacity Inc.
$3.480
Semicontronic
$3.393
$3.376
Aztec Data Supply Inc.
$4.668
Gateway Technologies
$5.231
$4.655
Continental Prestige Electronics
$5.239
Netroflash
$5.079
$4.972
Advanced Electronics
$5.412
Singapore Electronics
$5.753
$5.350
$5.120
$4.890
Abianca Electronics
$382.505
$367.205
Authorized Procurement Solutions
Argo Parts USA
Low insertion loss ensures minimal signal degradation, making this product ideal for high-frequency applications where signal integrity is crucial.
Gold contact finish provides excellent conductivity and corrosion resistance, ensuring reliable connections and signal transmission over time.
Snap coupling type allows for quick and easy connections, making this product convenient for applications that require frequent connecting and disconnecting.
The use of high-quality insulator materials like acetal and polytetrafluoroethylene ensures excellent electrical insulation and durability, making this product suitable for harsh environments.
RF MCX connectors are commonly used in high-frequency applications, ensuring compatibility with a wide range of devices and systems.
A low VSWR of 1.5 indicates good impedance matching and minimal reflected power, leading to efficient signal transmission and reduced signal loss.
Cable mounting type allows for versatile installation options and flexibility in system design, making this product suitable for various setups.
A characteristic impedance of 50 ohms is standard in RF applications, ensuring compatibility and efficient power transfer between connected devices.
Crimp termination type offers a secure and reliable connection, reducing signal loss and ensuring long-term performance and durability.
Male contact gender is commonly used in RF applications, providing compatibility with most RF devices and equipment.
Plug body style allows for easy and secure connections, making this product a convenient choice for various RF applications.
Right-angle mounting style allows for space-saving and flexible installation in tight spaces or complex setups, enhancing the versatility of this product.
With a high maximum operating frequency of 6 GHz, this product is suitable for demanding high-frequency applications, ensuring reliable performance in advanced systems.
MCX & MMCX Connectors 252102 attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
252102 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
1005-13-100-4774, 1005131004774, 4320-99-733-8076, 4320997338076, 5365-01-246-7420, 5365012467420, 5975-12-323-2566, 5975123232566
NIIN
131004774, 997338076, 012467420, 123232566
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1554216004
Molex
WIRE AND CABLE;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
MMCX-P-P-H-ST-MT1
Samtec
Samtec's MMCX-P-P-H-ST-MT1 is a RF MMCX connector with 50 ohm impedance, gold termination finish, and 6 GHz operating frequency. Ideal for commercial applications, it offers high insulation resistance of 1 Gohm and can withstand up to 700VAC dielectric voltage. With a temperature range from -65°C to 125°C, this connector is suitable for various board mounting setups.
MMCX-J-P-H-ST-SM1-K-TR
Samtec's MMCX-J-P-H-ST-SM1-K-TR is a 50 ohm RF MMCX connector with POLYTETRAFLUOROETHYLENE insulator. Featuring a 0.136" body diameter and 0.197" body depth, it is ideal for surface mount board applications requiring a reliable female jack connector with brass shell material.
MMCX7-J-C-GF-ST-CA3
RF MMCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
16_MMCX-50-1-1/111_OH
Huber+suhner Ag
16_MMCX-50-1-1/111_OH by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for RG-196A/U cables. Featuring a max operating frequency of 6 GHz and durability of 500 cycles, it is ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -55 to 155 °C.
133-3711-317
Bel Fuse
Bel Fuse's 133-3711-317 is an RF MCX connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 6 GHz and can withstand temperatures ranging from -65 to 165 °C. This surface mount connector is commonly used in commercial applications requiring reliable and durable connections.
1-1634010-0
TE Connectivity
TE Connectivity 1-1634010-0 is an RF MMCX connector with characteristic impedance of 50 ohm, operating frequency up to 6 GHz. Featuring PTFE insulation material, it has a durability of 500 cycles and operates in temperatures ranging from -55 to 155 °C. Ideal for board mounting applications requiring high-quality female coax connectors.
133-3711-311
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; MIL Conformity: NO; Termination Type: SURFACE MOUNT;
135-9701-201
Vertiv
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: SOLDER; Filter Feature: NO;
16_MMCX-50-1-12/111_OE
16_MMCX-50-1-12/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for applications up to 6 GHz. It features gold (Au) termination contact finish with nickel (Ni) barrier and operates in temperatures ranging from -55°C to 155°C. Ideal for commercial use, this male plug connector has a right-angle mounting style and solder termination type.
133-3711-312
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; DIN Conformance: NO; Termination Type: SURFACE MOUNT;
135-3701-201
135-3701-201 by Bel Fuse is an RF MMCX connector with a characteristic impedance of 50 ohm, suitable for commercial applications up to 6 GHz. Featuring a dielectric voltage rating of 700VAC and insulation resistance of 1 Gohm, it offers reliable performance in temperatures ranging from -55 to 155 °C. This snap-coupling type connector has a durable brass shell and PTFE insulator, ideal for board mounting with a locking option.
82_MMCX-50-0-1/111_NE
82_MMCX-50-0-1/111_NE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It operates up to 6 GHz, has a VSWR of 1.11, and withstands temperatures from -55 to 155 °C. Ideal for commercial applications requiring durable board mounting connectors with female contact gender.
MMCX-J-P-H-ST-SM1-TR
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
135-3403-101
Bel Fuse's 135-3403-101 RF MMCX Connector features a dielectric voltage of 707VAC, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for commercial applications, it is designed for use with cables like RG-161, RG-174, and RG-179 at frequencies up to 6 GHz.
MCX7-J-P-H-ST-SM1
Samtec's MCX7-J-P-H-ST-SM1 RF MCX connector has a dielectric voltage of 500VAC, impedance of 75 ohm, and operates up to 6 GHz. With a SNAP coupling type, it is ideal for board mounting in commercial applications requiring high-frequency signal transmission.
MMCX-J-P-H-RA-TH1
Samtec's MMCX-J-P-H-RA-TH1 RF MMCX Connector features a 0.138" body diameter, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications requiring a right-angle jack with female contact gender and gold finish for reliable signal transmission.
MMCX-J-P-H-RA-SM1
Samtec's MMCX-J-P-H-RA-SM1 is a RF MMCX connector with 50 ohm impedance, gold contact finish, and 6 GHz frequency. Ideal for board mounting applications requiring a right angle jack with surface mount termination. Offers high insulation resistance of 1Gohm and dielectric voltage withstand of 700VAC.
MMCX-J-P-H-ST-SM1
Samtec's MMCX-J-P-H-ST-SM1 is a RF MMCX connector with 50 ohm impedance, 6 GHz frequency, and 1.3 VSWR. It features gold contact finish, PTFE insulator material, and brass shell for surface mount applications in commercial settings.
MCX-J-C-H-ST-CA1
Samtec's MCX-J-C-H-ST-CA1 RF connector has a 50 ohm impedance, 6 GHz frequency, and 1400VAC dielectric voltage. Ideal for commercial applications, it features gold contact finish, PTFE insulator, and RG-174 cable compatibility. With a temperature range of -65 to 125 °C, this jack-style connector is reliable for various RF connections.
1512
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Insertion Loss: .1 dB; Mounting Option-1: LOCKING;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
252180
Amphenol
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Manufacturer Series: 252180; Body or Shell Style: PLUG; Termination Type: CRIMP;
252102-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .1 dB; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD;
252107-75
Amphenol 252107-75 is an RF MCX connector with gold termination, beryllium copper contact material, and PTFE insulator. It is used in commercial applications requiring reliable coax connections for male plugs on panels with straight mounting and locking options.
252127
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; DIN Conformance: NO;
252107
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Characteristic Impedance: 50 ohm; DIN Conformance: NO;
252151
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 1 GHZ; Panel Mount: NO; Coupling Type: SNAP;
252103
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Termination Contact Finish: GOLD; Insulator Material: POLYTETRAFLUOROETHYLENE;
252129
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
252100-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Voltage Standing Wave Ratio: 1.5; Manufacturer Series: MCX;
252100
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; Insertion Loss: .1 dB; Manufacturer Series: 252100;
252101-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; JESD-609 Code: e4; Filter Feature: NO;
252101
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Maximum Operating Frequency: 6 GHz; Termination Type: CRIMP;
252103-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; MIL Conformity: NO; DIN Conformance: NO;
252106
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: GOLD (30);
252108
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Coupling Type: SNAP; Body or Shell Style: PLUG;
252109
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
252111
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Style: STRAIGHT; Mating Contact Finish: GOLD (30);
252142-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: MCX; Filter Feature: NO; Mounting Type: BOARD;
252149
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: BOARD; Additional Features: INSERTION LOSS MAX AT 1 GHZ;
252153
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Termination Contact Finish: GOLD; Insulator Material: POLYTETRAFLUOROETHYLENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved