Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 252103 RF MCX Connector features 0.1 dB insertion loss, GOLD termination contact finish, and SNAP coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
Median Price
$6.298
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Arrow
1+ parts
$0.758
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$4.540
$3.783
$3.547
Interstate Connecting
$4.722
$3.923
$3.826
Chip1Stop
$5.520
RS Americas
$7.040
$5.070
$3.940
TTI
$7.450
$5.370
$4.570
$4.520
Mouser Electronics
RS (Exports)
$8.210
Element14
$10.890
$7.150
$6.320
Master Electronics
$5.240
$4.460
$4.400
Verical
$6.165
$5.506
Powell Electronics
$6.430
$5.430
Bristol Electronics
$6.220
$3.110
DF Sales Co.
$7.000
Vyrian
Shortec Electronics
VNN
IBS Electronics
$8.700
$6.289
$6.274
Nova Conductors
PC Components Company LLC
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Inventory MP
American Microsemiconductor Inc.
American Connector Supply Corp
Gateway Technologies
$1.330
$1.183
Singapore Electronics
$1.463
$1.360
$1.302
$1.243
Ampacity Inc.
$3.070
Allen Electronics Distributors
$6.380
$5.000
Argo Parts USA
Kepictronics
Continental Prestige Electronics
Netroflash
Perfect Parts
Low insertion loss ensures minimal signal loss and maintains signal integrity in high-frequency applications.
Gold termination contact finish provides superior conductivity, corrosion resistance, and durability, resulting in reliable connections.
Snap coupling type allows for quick and easy connection and disconnection, making it convenient for frequent setups and teardowns.
Polytetrafluoroethylene insulator material offers high dielectric strength and excellent temperature resistance, ensuring stable performance in challenging environments.
RF MCX connector is a widely used standard for high-frequency applications, ensuring compatibility and interchangeability with a variety of equipment.
Brass contact material provides good conductivity and resistance to corrosion, enhancing the durability and longevity of the connector.
Gold mating contact finish ensures reliable and low-loss connections, contributing to overall signal quality and performance.
A low VSWR of 1.3 indicates minimal signal reflection and efficient power transfer, maintaining signal quality and reducing losses.
Cable mounting type allows for easy installation and secure connection to cables, ensuring stability and reliability in various applications.
A 50-ohm characteristic impedance is ideal for high-frequency signals, providing proper matching and minimizing signal reflections for optimal performance.
Crimp termination type offers a secure and reliable connection by mechanically attaching the connector to the cable, ensuring consistent performance.
Male contact gender allows for mating with female connectors, providing versatility and compatibility in various system configurations.
Plug body style is commonly used for easy insertion and removal, making it user-friendly and suitable for applications requiring frequent mating and unmating.
Straight mounting style offers a direct and efficient connection, reducing signal losses and minimizing interference for improved performance.
Support for a high operating frequency of 6 GHz allows for reliable performance in demanding high-frequency applications such as telecommunications and RF test equipment.
MCX & MMCX Connectors 252103 attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
252103 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
1005-13-100-4878, 1005131004878, 1630-00-690-6083, 1630006906083, 5130-12-346-1511, 5130123461511, 5975-12-323-2567, 5975123232567
NIIN
131004878, 006906083, 123461511, 123232567
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Semtech
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Zetex Plc
11_MMCX-50-1-1/111_OE
Huber+suhner Ag
11_MMCX-50-1-1/111_OE by Huber+suhner Ag is a RF MMCX connector with a body diameter of 0.138 inch and termination contact finish of Gold (Au) - with Nickel (Ni) barrier. It is used in applications requiring a characteristic impedance of 50 ohm, such as commercial reliability and max operating frequency of 6 GHz.
1060772-2
Tyco Electronics Amp
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; IEC Conformity: NO; Mating Contact Finish: GOLD;
73366-0301
Molex
Molex 73366-0301 RF MCX Connector with 50 ohm impedance, 1400VAC dielectric voltage, and 6 GHz frequency is ideal for RG-316 cables in commercial applications. Features include PTFE insulation, gold finish, and zinc alloy shell material for durability. Operating temperatures range from -55 to 85°C with a max insertion force of 11.12N.
R113.182.000W
Radiall S A
R113.182.000W by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.5 dB insertion loss, and 1.1 VSWR. It is used in applications requiring high durability, such as commercial-grade systems operating up to 6 GHz frequency range with RG-188 cables for reliable signal transmission.
73366-0013
The Molex 73366-0013 is a RF MCX connector with a characteristic impedance of 50 ohm. It has an insertion loss of 0.45 dB and can withstand voltages up to 1050VAC. This connector is commonly used in commercial applications requiring reliable connections at frequencies up to 6 GHz.
85_MMCX-50-0-1/111_OH
85_MMCX-50-0-1/111_OH by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It features a right angle mounting style, gold shell finish, and female contact gender. Suitable for board mounting applications, it has a durability of 500 cycles and can operate at temperatures ranging from -55 to 155 °C.
R113.240.000
R113.240.000 by Radiall S A is an RF MCX connector with a characteristic impedance of 50 ohm and a max operating frequency of 6 GHz. It features a dielectric withstanding voltage of 500VAC, making it suitable for high-frequency applications in commercial settings. With gold over nickel termination contact finish, this durable connector has a durability of 500 cycles and operates within a temperature range of -55 to 155 °C.
MMCXV-J-P-HF-ST-TH1
Samtec
Samtec's MMCXV-J-P-HF-ST-TH1 is a RF MMCX connector with 50 ohm impedance, 1.3 VSWR, and 6 GHz operating frequency. Ideal for commercial applications, it features a 0.138" body diameter, PTFE insulator, and brass shell material for reliable performance in temperatures ranging from -65 to 125°C.
252127
Amphenol
Amphenol 252127 RF MCX Connector features 50 ohm impedance, 0.1 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications with RG-178B/U cable type, it offers durability of 500 cycles and operates b/w -55 to 155 °C temperature range.
133-8433-101
Cinch Connectivity Solutions
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 75 ohm; Mating Contact Finish: GOLD (30); MIL Conformity: NO;
60636031210620
Wuerth Elektronik & Kg
RF MCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1060995-1
TE Connectivity
TE Connectivity's 1060995-1 RF MCX Connector features 0.177" body diameter, 0.1 dB insertion loss, and 50 ohm characteristic impedance. Ideal for commercial applications with a frequency range up to 6 GHz, this female jack connector is designed for board mounting with TFE insulator material and gold shell finish.
262103
Amphenol 262103 is an RF MMCX connector with gold contact finish, brass material, and PTFE insulator. It features snap coupling for cable termination in male gender plug style. Ideal for right-angle mounting applications in MCX & MMCX connectors category.
908-22101-TC
Amphenol's 908-22101-TC RF MMCX Connector features GOLD finish, LIQUID CRYSTAL POLYMER insulator, and BERYLLIUM COPPER contact material. With a 50 ohm impedance and 6 GHz operating frequency, it is ideal for high-frequency applications requiring surface mount termination in MCX & MMCX Connectors.
73415-0970
Molex 73415-0970 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for commercial applications with a frequency range up to 6 GHz, this connector offers durability with 500 cycles and operates b/w -55°C to 165°C.
133-3711-318
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: RIGHT ANGLE; Termination Type: SURFACE MOUNT;
R113182000
Radiall S A R113182000 RF MCX Connector features 50 ohm impedance, 1.1 VSWR, and operates up to 6 GHz. With gold-plated contacts and PTFE insulator, it is ideal for high-frequency cable connections in various applications.
1-1337582-0
TE Connectivity 1-1337582-0 RF MCX Connector features 500000000 ohm Insulation Resistance, 0.03 dB Insertion Loss, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for applications requiring a durable, polarized housing connector with a characteristic impedance of 50 ohm and max operating frequency of 6 GHz.
R213.082.007
R213.082.007 by Radiall S A is an RF MCX connector with a body diameter of 0.228", insulation resistance of 1G ohm, and insertion loss of 0.15 dB. It is used in applications requiring a max operating frequency of 6 GHz, such as commercial reliability testing for cables like RG-179 with termination type crimping.
MCX7-J-P-HN-RA-TH1
Samtec's MCX7-J-P-HN-RA-TH1 RF MCX Connector features 75 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for board mounting applications requiring a straight jack with solder termination for high-frequency signal transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
252180
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Manufacturer Series: 252180; Body or Shell Style: PLUG; Termination Type: CRIMP;
252102
Amphenol 252102 RF MCX Connector features 0.1 dB insertion loss, gold termination contact finish, and snap coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
252102-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .1 dB; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD;
252107-75
Amphenol 252107-75 is an RF MCX connector with gold termination, beryllium copper contact material, and PTFE insulator. It is used in commercial applications requiring reliable coax connections for male plugs on panels with straight mounting and locking options.
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; DIN Conformance: NO;
252107
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Characteristic Impedance: 50 ohm; DIN Conformance: NO;
252151
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 1 GHZ; Panel Mount: NO; Coupling Type: SNAP;
252129
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
252100-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Voltage Standing Wave Ratio: 1.5; Manufacturer Series: MCX;
252100
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; Insertion Loss: .1 dB; Manufacturer Series: 252100;
252101
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Maximum Operating Frequency: 6 GHz; Termination Type: CRIMP;
252103-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; MIL Conformity: NO; DIN Conformance: NO;
252104-01
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: MCX; Termination Contact Finish: GOLD (30); Filter Feature: NO;
252104-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insertion Loss: .1 dB; MIL Conformity: NO; Characteristic Impedance: 75 ohm;
252104
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insertion Loss: .1 dB; DIN Conformance: NO; Coupling Type: SNAP;
252105-01
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: GOLD; DIN Conformance: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
252105-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Voltage Standing Wave Ratio: 1.3; Additional Features: INSERTION LOSS MAX AT 1 GHZ;
252106
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: GOLD (30);
252108
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Coupling Type: SNAP; Body or Shell Style: PLUG;
252109
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved