Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 252129 RF MCX Connector features 0.1 dB insertion loss, 1.5 VSWR, and 50 ohm impedance. Ideal for board mounting applications up to 6 GHz frequency range with right angle mounting style.
Median Price
$5.620
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$4.063
100+ parts
1k+ parts
-
10k+ parts
Mouser Electronics
$7.180
$5.240
$4.450
Powell Electronics
$7.360
$5.380
$4.710
Newark
$10.860
$8.470
$7.850
Master Electronics
$5.120
$4.350
$4.340
Verical
$6.024
$5.788
Chip1Stop
$4.900
$4.290
Arrow
$5.217
$4.314
VNN
Sensible Micro Corp
Inventory MP
Bristol Electronics
Rapid Electronics
$5.676
Nova Conductors
Electro Sonic
$5.030
$4.000
$3.780
IBS Electronics
$6.872
$5.680
$5.624
Semi Source
Prism Electronics
Ampacity Inc.
$4.170
Gateway Technologies
$14.390
$12.807
Singapore Electronics
$15.829
$14.720
$14.087
$13.454
Kepictronics
Argo Parts USA
Continental Prestige Electronics
Netroflash
Low insertion loss ensures minimal signal loss, leading to better overall performance and signal quality.
Snap coupling allows for quick and easy connections, making installation and maintenance hassle-free.
PTFE insulator material provides excellent electrical insulation, stability, and resistance to high temperatures, enhancing the durability of the connector.
RF MCX connectors are widely used in telecommunications and RF applications, ensuring compatibility and reliability.
A VSWR of 1.5 indicates low signal reflection and high power transfer efficiency, resulting in better signal transmission quality.
Board mounting enables secure attachment to circuit boards, ensuring stability and reliable performance in electronic devices.
50-ohm impedance matching is standard in RF applications, providing optimal signal transfer and reducing signal loss.
Solder termination offers a secure and durable connection, minimizing signal interference and ensuring long-term reliability.
Female connectors are typically used to receive signals, providing a secure and stable connection for improved signal transmission.
Jack-style connectors are versatile and commonly used in various audio and RF applications, offering easy plug-in connections.
Right-angle mounting allows for space-saving installation and better cable management, making it ideal for compact electronic devices.
With a high operating frequency of 6 GHz, this connector is suitable for high-speed data transmission and demanding RF applications.
MCX & MMCX Connectors 252129 attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
252129 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
4320-14-278-2998, 4320142782998
NIIN
142782998
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
American Power Devices
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Components
Littelfuse
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Ksl Microdevices
133-3711-318
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: BOARD;
73415-1690
Molex
The Molex 73415-1690 is a RF MCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is designed for surface mount termination on boards, making it suitable for various applications in the MCX & MMCX connectors category.
262105-11
Amphenol
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
135-3701-311
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 1 GHZ; Mounting Style: RIGHT ANGLE; Maximum Operating Frequency: 6 GHz;
262101
Amphenol's 262101 is an RF MMCX connector with SNAP coupling, PTFE insulator, and male contact gender. Ideal for cable mounting with crimp termination, it suits applications requiring reliable plug-style connectors in straight mounting configuration.
1514
SPC TECHNOLOGY/ MULTICOMP
1514 RF MCX Connector by Spc Technology/ Multicomp features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. Ideal for RG-174 cables in commercial applications requiring a polarized housing with right angle mounting.
R113426000
Radiall S A
R113426000 by Radiall S A is a RF MCX connector with 50 ohm impedance, gold termination, and snap coupling. Ideal for applications up to 6 GHz frequency, it features a VSWR of 1.12 and PTFE insulator for reliable performance in board and panel mounting setups.
135-3403-101
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD OVER NICKEL; Filter Feature: NO; MIL Conformity: NO;
MMCX-J-P-H-ST-SM1-K
Samtec
RF MMCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
5864-5001-10
M/a-com Technology Solutions
RF MCX CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; IEC Conformity: NO; Body or Shell Style: RECEPTACLE; Manufacturer Series: OSX;
73415-1002
Molex 73415-1002 RF MMCX Connector features 0.2 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. Ideal for commercial applications requiring durable board mounting with right angle coaxial contact style.
82_MCX-S50-0-22/111_NM
Huber+suhner Ag
82_MCX-S50-0-22/111_NM by Huber+suhner Ag is a RF MCX CONNECTOR with 50 ohm impedance, gold-plated BERYLLIUM COPPER contacts, and SNAP coupling. It has an insulation resistance of 10^10 ohm, dielectric voltage of 1060VAC, and operates b/w -55 to 155 °C. Ideal for board mounting in applications requiring high durability and frequency up to 6 GHz.
MMCX-J-P-H-ST-SM1-TR
1061030-1
Tyco Electronics Amp
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.35; Mating Contact Finish: GOLD; Mounting Type: BOARD;
MCX7-P-C-H-RA-CA3
Samtec's MCX7-P-C-H-RA-CA3 RF MCX Connector features a 1.3 VSWR, 75 ohm impedance, and operates up to 6 GHz. With a right-angle mounting style, it is ideal for cable termination in high-frequency applications requiring snap coupling and gold over nickel finish.
MMCX1121A1-3GT30G-5-50
RF MMCX CONNECTOR;
73415-2061
Molex 73415-2061 RF MMCX Connector features gold nickel termination, PTFE insulator, and beryllium copper contact material. With a durability of 500 cycles, it is ideal for commercial applications requiring a 50 ohm characteristic impedance up to 40 GHz frequency range. This panel mount connector has a snap coupling type and operates b/w -55°C to 165°C temperatures.
82_MMCX-50-0-1/111_NE
82_MMCX-50-0-1/111_NE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It operates up to 6 GHz, has a VSWR of 1.11, and withstands temperatures from -55 to 155 °C. Ideal for commercial applications requiring durable board mounting connectors with female contact gender.
133-8433-101
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Style: COAX;
73415-0963
Molex 73415-0963 RF MMCX Connector features SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for BOARD mounting in RF applications requiring STRAIGHT JACK style connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
252180
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Manufacturer Series: 252180; Body or Shell Style: PLUG; Termination Type: CRIMP;
252102
Amphenol 252102 RF MCX Connector features 0.1 dB insertion loss, gold termination contact finish, and snap coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
252102-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .1 dB; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD;
252107-75
Amphenol 252107-75 is an RF MCX connector with gold termination, beryllium copper contact material, and PTFE insulator. It is used in commercial applications requiring reliable coax connections for male plugs on panels with straight mounting and locking options.
252127
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; DIN Conformance: NO;
252107
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Characteristic Impedance: 50 ohm; DIN Conformance: NO;
252151
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 1 GHZ; Panel Mount: NO; Coupling Type: SNAP;
252103
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Termination Contact Finish: GOLD; Insulator Material: POLYTETRAFLUOROETHYLENE;
252105-01
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: GOLD; DIN Conformance: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
252115
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Filter Feature: NO; MIL Conformity: NO;
252121
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.3; Filter Feature: NO; JESD-609 Code: e4;
252123
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Voltage Standing Wave Ratio: 1.5; Panel Mount: NO;
252125
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Body or Shell Style: RECEPTACLE; Voltage Standing Wave Ratio: 1.3;
252126
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Panel Mount: NO; Termination Type: CRIMP;
252128-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 6 GHz; Panel Mount: NO; Additional Features: INSERTION LOSS MAX AT 1 GHZ;
252128
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Additional Features: INSERTION LOSS MAX AT 1 GHZ; JESD-609 Code: e4;
252129-75
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Shell Finish: GOLD;
252145
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; IEC Conformity: NO; Panel Mount: YES;
252153
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Termination Contact Finish: GOLD; Insulator Material: POLYTETRAFLUOROETHYLENE;
252173
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Voltage Standing Wave Ratio: 1.3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved