Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
Median Price
$60.683
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$21.430
100+ parts
$16.830
1k+ parts
-
10k+ parts
Verical
Arrow
RS (Exports)
$517.617
$505.195
Digiode
$20.358
Schukat
$23.320
$13.360
EXC GmbH
$29.561
Nova Conductors
$51.060
Chip Stock
Sensible Micro Corp
Cyclops Electronics Ltd
Dan-Mar Components
ACDS - Activité Composants Distribution Service
Vyrian
K-1 Technologies
Touchstone Systems
Velocity Electronics
Flip Electronics
ComSIT Distribution GmbH
ComSIT USA
Bristol Electronics
Atlantic Semiconductor
Semi Source
LIBRA Elektronik GmbH
Sea View Technologies
Pegasus Components GmbH
Rebound Electronics
Electronics Depot
J & M Industries LLC
Connector Distribution Corp
Right Parts Inc.
EMSNET
Ampacity Inc.
$18.220
Semicontronic
$17.764
$17.673
Corphita
$19.287
MARBEL Systems
$30.585
Texas Native Microelectronics
$35.155
$30.936
Vigor
$38.300
Continental Prestige Electronics
$41.225
$40.400
Kenton Components
$42.186
$37.124
Netroflash
$48.507
$47.486
Advanced Electronics
$57.122
$54.266
Aztec Data Supply Inc.
$62.997
Corohmni
$80.726
Modulus Dynamics
$92.080
Qasali Group International
$94.918
$83.528
Microchip USA
$129.191
S.R.D Solutions
Perfect Parts
GreenTree Electronics
Lixinc
Authorized Procurement Solutions
Alle Elektronik GmbH
Glotronic Ltd.
Supply Digital
Argo Parts USA
A-Z Elektronik GmbH
Kepictronics
Assy Fe
ChipTracer
Andel Nordic
Robosynatics
Lucentia Tech
$0.270
Allen Electronics Distributors
RC Electronics
$48.600
$44.360
$43.020
Futuretech Components
Computer Components Inc. - USA
ChipstoGo Electronic ltd
Cyclops Electronics Ltd (Excess)
Programmable Logic Devices (PLD) EPM1270T144C5N attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
EPM1270T144C5N Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - MAX II EOL-Reversal 19/Mar/2021 Mult Dev EOL 4/Dec/2020
PCN Design/Specification - Appearance Update 30/Mar/2015 Quartus SW/Web Chgs 23/Sep/2021
PCN Packaging - Mult Dev Label CHG 24/Jan/2020 Mult Dev Label Chgs 24/Feb/2020
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1552200168
Molex
WIRE AND CABLE;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Uniohm
Daco Semiconductor
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Bytesonic Electronics
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Silicon Standard
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPM240M100I5N
Intel
The Intel EPM240M100I5N is a FLASH PLD with 192 macro cells, 80 inputs/outputs, and 7.5 ns propagation delay. It is used in programmable logic applications requiring fast processing speeds and high I/O capabilities. The device features a plastic/epoxy package body material, operates at a max supply voltage of 2.625 V, and supports in-system programmability for versatile design implementations.
EP1K50TC144-2N
Altera
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM2210F256C4N
Intel's EPM2210F256C4N is a PLD with 1700 macro cells, 204 inputs/outputs, and 9.1ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and control systems due to its FLASH PLD technology and JTAG boundary scan test capability.
5M570ZM100I5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: TFBGA; Package Shape: SQUARE;
GAL16V8D-25LP
Lattice Semiconductor
GAL16V8D-25LP by Lattice Semiconductor is a 5.25V EE PLD with 18 inputs, 8 I/O lines, and 8 outputs. Featuring a propagation delay of 25ns and max clock frequency of 37MHz, it's ideal for PAL-TYPE applications requiring fast processing speeds in commercial environments at temperatures ranging from 0 to 70°C.
EPM7128SLC84-15N
The EPM7128SLC84-15N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 15 ns and can operate at a maximum clock frequency of 100 MHz. It is surface mountable and has a package shape of square. The device can be in-system programmable and has configurable I/O operation with 3.3V or 5V. Its applications include digital circuit design, data processing, and communication systems.
GAL22V10D-10QPN
GAL22V10D-10QPN by Lattice Semiconductor is a 5V CMOS PLD with 10ns propagation delay, 132 product terms, and 83.3MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature environments.
EP20K160ETC144-2X
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPF10K50VRI240-4N
Intel's EPF10K50VRI240-4N is a PLD with 2880 logic cells, 0.6 ns propagation delay, and 3.6 V max supply voltage. Ideal for industrial applications requiring fast processing and high I/O capacity in a compact 32mm square package with GULL WING terminals.
XC9572XL-10VQG44I
Xilinx
Xilinx XC9572XL-10VQG44I is a 3.3V CMOS PLD with 72 macro cells, 34 I/O lines, and 100MHz clock frequency. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and propagation delay of 10ns.
SLG46855V
Dialog Semiconductor
OT PLD; Form Of Terminal: NO LEAD; No. of Terminals: 14; Package Code: VQCCN; Package Shape: RECTANGULAR; No. of Inputs: 11;
XC2C64A-5QFG48C
Xilinx XC2C64A-5QFG48C is a 64 macrocell FLASH PLD with 5 ns propagation delay, operating at max 333 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan test capability. Package style: chip carrier, very thin profile.
EPM570M100C5N
The Intel EPM570M100C5N is a FLASH PLD with 440 macro cells, 76 I/O lines, and 8.7 ns propagation delay. It is used in applications requiring programmable logic devices with in-system programmability and JTAG boundary scan testing capabilities.
XC95144XL-7TQ144C
The Xilinx XC95144XL-7TQ144C is a 144 macrocell FLASH PLD with 117 inputs/outputs. It operates at a max clock frequency of 125 MHz, with a propagation delay of 7.5 ns. Ideal for applications requiring in-system programmability and high-speed data processing in commercial-grade environments.
EP1K30QC208-3N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
5M570ZT144C5N
The Altera 5M570ZT144C5N is a programmable logic device with 440 macro cells. It operates on a nominal supply voltage of 1.8V and has a maximum clock frequency of 118.3MHz. The package shape is square, with 144 terminals in a gull wing form. It is surface mountable and has a low profile flatpack style. It is in-system programmable and supports JTAG boundary scan testing. This PLD is commonly used for applications that require high-speed processing and flexible design capabilities.
M4A5-96/48-55VNC
M4A5-96/48-55VNC by Lattice Semiconductor is a 96 macrocell EE PLD with 48 I/O lines. It features a propagation delay of 5.5 ns, operates at a max clock frequency of 105 MHz, and has in-system programmability. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
ATF22V10C-10SU
ATF22V10C-10SU by Microchip Technology is a 5.5V CMOS PLD with 10ns propagation delay, suitable for industrial applications. Featuring 22 inputs, 10 I/O lines, and 10 outputs with a clock frequency of up to 90MHz. This flash PLD in small outline package is ideal for PAL-type architecture designs requiring fast processing speeds.
ATF22V10CQZ-20XU
ATF22V10CQZ-20XU by Microchip Technology is a CMOS-based PLD with 22 inputs, 10 I/O lines, and 10 outputs. It has a propagation delay of 20ns, operates at a max clock frequency of 38.5MHz, and is suitable for industrial applications requiring programmable logic devices in small outline packages.
EPM570M100I5N
FLASH PLD; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE; Maximum Time At Peak Reflow Temperature (s): 30;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPM1270T144I5N
The Intel EPM1270T144I5N is a FLASH PLD with 980 macro cells, 116 inputs/outputs, and 10ns propagation delay. Ideal for applications requiring in-system programmability, it operates at temperatures from -40 to 100°C and supports JTAG boundary scan testing.
FLASH PLD; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE; Finishing Of Terminal Used: MATTE TIN;
EPM1270T144C5N
EPM1270T144C5N by Intel is a Flash PLD with 980 macro cells, 116 inputs/outputs, and a propagation delay of 10 ns. It is ideal for applications requiring in-system programmability, such as digital signal processing and control systems due to its low profile package style and CMOS technology.
EPM1270F256I5N
The Intel EPM1270F256I5N is a FLASH PLD with 980 macro cells, 212 inputs/outputs, and 10ns propagation delay. Ideal for applications requiring programmable logic devices in a compact grid array package with JTAG boundary scan test capability.
The EPM1270F256I5N by Altera is a programmable logic device with 980 macro cells. It has a maximum supply voltage of 2.625V and uses CMOS technology. It is a flash PLD that is in-system programmable. The package style is grid array, with 256 terminals. Its top application is as a macrocell output function.
EPM1270F256C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: SQUARE;
EPM1270F256C5N by Intel is a programmable logic device (PLD) with 980 macro cells and 212 inputs/outputs. It uses CMOS technology and has a max supply voltage of 2.625V. This PLD is suitable for applications requiring in-system programmability and a fast propagation delay of 10ns.
EPM1270T144C3N
EPM1270T144C3N by Intel is a FLASH PLD with 980 macro cells, 116 inputs/outputs, and 6.2 ns propagation delay. Ideal for applications requiring fast processing speeds and high input/output capabilities in programmable logic devices.
The EPM1270T144C3N by Altera is a programmable logic device (PLD) with 980 macro cells. It has a propagation delay of 6.2 ns and can operate at a maximum supply voltage of 2.625 V. This device is surface mountable and uses CMOS technology. Its package shape is square with gull wing terminals. It is an in-system programmable flash PLD with a minimum supply voltage of 2.375 V. The EPM1270T144C3N is commonly used for applications that require the output function of a macrocell, such as digital signal processing and control systems.
EPM1270GT144C4N
The Altera EPM1270GT144C4N is a programmable logic device with 980 macro cells, CMOS technology, and a propagation delay of 8.1 ns. It can operate at a maximum supply voltage of 1.89V and has a package shape of square. This PLD is commonly used for applications requiring in-system programmability and output functions like macrocell.
EPM1270T144C4N
EPM1270M256C5N
EPM1270M256C5N by Intel is a programmable logic device (PLD) with 980 macro cells and 212 inputs/outputs. It has a propagation delay of 10 ns and can operate at temperatures up to 85°C. This PLD is commonly used for in-system programming and features JTAG boundary scan testing.
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: RECTANGULAR;
EPM1270M256I5N
FLASH PLD; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: RECTANGULAR; No. of Macro Cells: 980;
FLASH PLD; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: RECTANGULAR; JTAG Boundary Scan Test: YES;
EPM1270GT144C5N
EPM1270T144A4N
FLASH PLD; Grading Of Temperature: AUTOMOTIVE; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved