Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MULTIPLEXER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
ES Components
1+ parts
100+ parts
1k+ parts
10k+ parts
Fibra_Brandt Electronic GMBH
Jameco Electronics
Huijzer Components
LWI Electronics Inc
Manoshevitz Elec. Sales
Prism Electronics
LittleDiode
Component Electronics Inc.
Whistler Technology
Elcom Components
Mil-Aero Solutions, Inc.
Assy Fe
Schahn Electronic Components
Multiplexer & Demultiplexer 74LS151 attributes and parameters. Explore more Multiplexer & Demultiplexer devices from Agere Systems
JESD-30 Code:
JESD-609 Code:
Logic IC Type:
Maximum I (ol):
No. of Functions:
No. of Inputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay At Nominal Supply:
Qualification:
Sub-Category:
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
74LS151 Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-050-0920, 5962010500920
NIIN
010500920
Agere Systems, Inc. was an integrated circuit components company based in Allentown, Pennsylvania. Spun out of Lucent Technologies in 2002, Agere was merged into LSI Corporation in 2007. LSI was in turn acquired by Avago Technologies in 2014. SINGAPORE, Feb. 01, 2016 (GLOBE NEWSWIRE) -- Broadcom Limited (NASDAQ:AVGO) announced today that it has completed its acquisition of Avago Technologies Limited pursuant to a scheme of arrangement under Singapore law and that it will complete its acquisition of Broadcom Corporation this morning, subject to certain filings with the Office of the Secretary of State of California.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Yageo
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SN74LS151DRE4
SN74LS151DRE4 by Texas Instruments is an 8-input multiplexer with a propagation delay of 43ns at 5V. It features TTL technology, operates b/w 0-70°C, and has a terminal pitch of 1.27mm. Ideal for applications requiring high-speed data selection in commercial temperature environments.
CD74HC4052PWR
Rochester Electronics
Multiplexer/Demultiplexers;
JM38510/30903BEA
Motorola
SN74HC158DW-00R
SN74HC158DW-00R by Texas Instruments is a 4:1 multiplexer with 2 inputs, operating at a supply voltage range of 2V to 6V. It features a propagation delay of 52ns, suitable for industrial temperature grades (-40°C to 85°C). This CMOS technology device comes in a small outline package and is ideal for applications requiring inverted output polarity.
CD74AC257M
CD74AC257M by Texas Instruments is a 4-function, 2-input multiplexer with a propagation delay of 13ns at 3.3V. It operates in temperatures ranging from -55 to 125°C and has a max supply voltage of 5.5V. Ideal for military-grade applications requiring high-speed signal switching in compact spaces.
SN74CBT3251DRG4
SN74CBT3251DRG4 by Texas Instruments is a 16-terminal CMOS multiplexer with 8 outputs and a supply voltage range of 4V to 5.5V. It features a low propagation delay of 0.35 ns, making it ideal for industrial applications requiring fast signal switching in a small outline package. With a wide operating temperature range from -40°C to 85°C, this device is suitable for various electronic systems where space and speed are critical factors.
SN74HC157PWR
SN74HC157PWR by Texas Instruments is a 4-function, 2-input multiplexer with a propagation delay of 32ns. Operating at a nominal voltage of 5V, it has a max I (ol) of 7.8A and can handle load capacitance up to 50pF. Ideal for industrial applications requiring high-speed data switching in compact spaces due to its small outline package style.
SN74CB3Q3257PWR
SN74CB3Q3257PWR by Texas Instruments is a 4-function multiplexer with 0.12 ns propagation delay at 2.5V, suitable for industrial applications. It features a small outline package with 16 terminals and operates b/w -40 to 85°C, making it ideal for high-speed signal switching in compact designs.
54F257ALL
The Texas Instruments 54F257ALL is a TTL multiplexer with 4 functions and 2 inputs. It operates at a supply voltage range of 4.5V to 5.5V, with a propagation delay of 7ns. Ideal for military-grade applications requiring fast switching capabilities in harsh environments.
SN74LS253NSRE4
SN74LS253NSRE4 by Texas Instruments is a TTL technology multiplexer/demultiplexer with 2 functions and 4 inputs. It has a propagation delay of 25 ns at 5V, operates in commercial temperature grade, and features a small outline package suitable for surface mount applications.
SN74AS298ANE4
SN74AS298ANE4 by Texas Instruments is a TTL multiplexer with 4 functions and 2 inputs. It operates at a supply voltage of 5V, with a propagation delay of 11ns. Ideal for commercial applications requiring high-speed signal switching in electronic circuits.
SN74CBT3253CPWRE4
SN74CBT3253CPWRE4 by Texas Instruments is a 2-function multiplexer/demultiplexer with 16 terminals. It operates at a nominal voltage of 5V and has a propagation delay of 0.24ns. This CMOS technology device is ideal for industrial applications requiring high-speed signal switching in compact spaces.
CD74HCT4051M96G4
83054AGILF
Integrated Device Technology
83054AGILF by Integrated Device Technology is a 4-input multiplexer with a propagation delay of 4ns. Operating at temperatures from -40 to 85°C, it has a supply voltage range of 2.375V to 2.625V. Ideal for industrial applications requiring compact design and fast signal switching capabilities.
74HC157D
Toshiba
MULTIPLEXER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SNJ54F153FKR
SNJ54F153FKR by Texas Instruments is a 20-terminal chip carrier multiplexer/demultiplexer with 4 inputs, 2 functions, and a propagation delay of 11 ns. Operating in temperatures from -55 to 125 °C, it has a supply voltage range of 4.5V to 5.5V and load capacitance of 50 pF. Ideal for military-grade applications requiring high-speed signal switching in compact spaces.
PCA8550PW,118
NXP Semiconductors
NXP Semiconductors' PCA8550PW,118 is a 4-input multiplexer with a supply voltage range of 3V to 3.6V and propagation delay of 20ns. It comes in a small outline package suitable for commercial applications requiring fast switching capabilities at temperatures b/w 0°C to 70°C.
74HC151D
V62/04699-01XE
V62/04699-01XE by Texas Instruments is a 4-bit multiplexer with 38ns propagation delay, suitable for automotive applications. It operates at a nominal voltage of 5V, has 16 terminals in a small outline package, and supports up to 6V supply voltage. With surface mount capability and true output polarity, it offers efficient signal routing in compact designs.
CD4512BE
Intersil
MULTIPLEXER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Agere Systems
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved