Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Abracon's ALANS10001-3J11ET is a Datacom Transformer with 4 functions, 2500V isolation voltage, and 350uH primary inductance. Ideal for 10/100/1000 BASE-T applications, it operates b/w 0 to 70°C and features a compact size of 6.8mm x 12.2mm x 18.1mm for surface mounting.
Median Price
$2.630
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.690
1k+ parts
$1.520
10k+ parts
-
Farnell
$2.730
$2.190
$1.450
Avnet
$1.111
$1.090
Element14
$3.700
$2.520
Newark
$1.990
$1.820
$1.780
Vyrian
VNN
Nova Conductors
AZTECH Wire
$0.990
$0.950
$0.930
$0.910
Ampacity Inc.
$1.400
Aranea Global
Having 4 functions allows for versatile use and compatibility with a variety of applications, providing value for money.
High isolation voltage ensures safety and protection against electrical hazards, making the product reliable and durable.
The inductance value of 350 uH helps in efficient energy transfer and reduces signal distortion, ensuring high performance.
TR packing method ensures secure packaging and easy transportation, making handling and installation convenient.
Designed for high-speed networking applications, making it ideal for use in data communication systems requiring fast data transfer rates.
With a high maximum operating temperature of 70°C, the product can withstand harsh environmental conditions and ensure continuous operation without overheating.
Low minimum operating temperature of 0°C ensures reliable performance even in low-temperature environments, making it suitable for a wide range of applications.
Low profile design with a height of 6.8 mm saves space and allows for compact installation in space-constrained environments.
Narrow width of 12.2 mm enables efficient PCB layout and integration, providing flexibility in design and reducing overall footprint.
Specifically designed for data communication systems, ensuring optimal performance and reliable data transmission in pulse and datacom applications.
Surface mount design allows for easy and secure mounting on PCBs, simplifying assembly processes and ensuring stable connection.
Moderate length of 18.1 mm provides a balance between compact size and functionality, making it suitable for a variety of electronic devices and systems.
Equal turns ratio of 1CT:1CT ensures balanced signal transmission and efficient power conversion, enhancing overall performance and reliability.
Pulse & Datacom Transformers ALANS10001-3J11ET attributes and parameters. Explore more Pulse & Datacom Transformers devices from Abracon
Additional Features:
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
ALANS10001-3J11ET Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
Vishay Sprague
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
H2019NLT
Pulse Electronics
H2019NLT by Pulse Electronics is a Datacom Transformer with 2 primary windings and 22 secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1.2dB, and inductance of 350uH. Ideal for applications such as 10/100 BASE-TX and Ethernet, this transformer operates b/w -40°C to +70°C with dimensions of L12.70xB7.11xH5.97mm.
Q1553-22
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: Q1553-22; Maximum Operating Temperature: 130 Cel; Application: GENERAL PURPOSE; Width: 8.89 mm;
78602/16JC
Murata Manufacturing
78602/16JC by Murata Manufacturing is a pulse transformer with an isolation voltage of 1000 V. It has an inductance of 3350 uH and a min ET product of 28 V-us. This surface mount transformer is commonly used in pulse and datacom applications.
H1197NL
H1197NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for 10/100 BASE-TX Ethernet applications, featuring dimensions of L12.70xB6.73xH5.97 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installations in various networking setups.
77202C
Murata Manufacturing's 77202C is a pulse transformer with 2500V isolation voltage, 1000uH inductance, and 120 V-us min ET product. It is ideal for datacom applications due to its through-hole mounting feature and compact dimensions of 12.3mm x 20.3mm x 25.4mm.
H5007NL
H5007NL by Pulse Electronics is a 4-function datacom transformer with 1 dB insertion loss and 1500 V isolation voltage. Ideal for 1000 BASE-T applications, it operates b/w 0-70°C with dimensions of L17.53xB12.2xH5.26 mm, featuring a surface mount design and tin/copper terminal finish (Sn/Cu).
749013021
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 749013021 is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.2dB insertion loss, and primary inductance of 350uH. Ideal for LAN applications like 100 BASE-T due to its compact dimensions of 13.64mm x 11.94mm x 6.22mm and surface mounting feature. Operating temperature range from 0°C to 70°C makes it versatile for various environments.
96046323379
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Length: 14 mm; Isolation Voltage: 1875 V; No. of Functions: 2;
ITRF-0249-D101
Schurter Ag
Schurter Ag's ITRF-0249-D101 is a VDE-approved pulse transformer with 3200V isolation voltage, 50ns max pulse rise time, and 1200uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C temperatures and features dimensions of L18.2xB17.8xH13.0mm for through-hole mounting.
1082
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Turns Ratio (Np:Ns): 100:1;
CR7983-CLD
Coilcraft
CR7983-CLD by Coilcraft is a Pulse & Datacom Transformer with 5000V isolation voltage, 256uH inductance, and 1:2 turns ratio. Ideal for data communication applications due to its surface mounting feature and nominal input voltage of 5V. Operating temperature ranges from -40°C to 125°C.
H1102NLT
H1102NLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It has dimensions of L12.7xB7.11xH5.99 mm and operates b/w 0-70°C. Ideal for 10/100 BASE-T and AUTOMDIX applications, it features a 1:1 turns ratio and surface mounting feature.
1001
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Isolation Voltage: 2000 V; Minimum ET Product: 200 V-us;
TG100-MOST15N2LF
Halo Electronics
TG100-MOST15N2LF by Halo Electronics is a Pulse & Datacom Transformer with 1500V isolation voltage, 250uH inductance, and dimensions of 12.7mm x 7.11mm x 5.08mm. Ideal for SIGNAL applications, it operates b/w -40°C to 105°C temperature range and features a turns ratio of 1CT:1.5CT; 1CT:1CT for versatile use in data communication setups.
HX5401NL
HX5401NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. Ideal for Ethernet applications, it operates b/w -40°C to 85°C. With dimensions of 28.45mm x 17.27mm x 11.18mm, this surface mount transformer has a turns ratio of 1:1 and is designed for data communication systems.
HX1188FNL
HX1188FNL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH primary inductance, and dimensions of L12.7xB9.09xH5.99 mm. Ideal for surface mount applications, it operates b/w -40°C to 85°C, making it suitable for various data communication systems.
824-00274
E & E Magnetic Products
E & E Magnetic Products' 824-00274 is a Pulse & Datacom Transformer with Isolation Voltage of 1500V, Inductance (Primary) of 350uH, and Dimensions L25.4xB12.7xH5.97 (mm). Ideal for 10/1000 BASE-T applications, it operates b/w -40°C to +85°C temperature range and features Surface mounting method.
PE-5760NL
PE-5760NL by Pulse Electronics is a Datacom Transformer with 500V isolation voltage, 5000uH primary inductance, and 1:1:1 turns ratio. It is through-hole mounted and compact at L12.7xB8.89xH6.35 (mm). Ideal for data communication applications requiring efficient signal transformation.
SD250-4L
Coilcraft's SD250-4L is a Pulse Transformer with 3750V Isolation Voltage, 1500uH Inductance, and 375V-us Min ET Product. Ideal for BASE/GATE DRIVE applications, it operates b/w -40 to 85°C and features Through Hole Mounting at L27.94xB27.94xH24.13mm dimensions.
1000B-5001XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH; Application: 10/100/1000 BASE-T; No. of Functions: 4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALANC10001-CDB3DT
Abracon
ALANC10001-CDB3DT by Abracon is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 200uH Inductance, and 1CT:1CT Turns Ratio. Ideal for 10/100/1000 BASE-T, ETHERNET, and LAN applications due to its compact size and surface mount feature. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
ALANS10001-3J41ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 2500 V; Length: 18.1 mm; Application: 10/100/1000 BASE-T; Inductance (Primary): 350 uH;
ALAN210001-3J41DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100/1000 BASE-T; ETHERNET; Inductance (Primary): 350 uH; Width: 12.44 mm; Turns Ratio (Np:Ns): 1CT:1CT;
ALANS100X1-1E10JT
ALANS100X1-1E10JT by Abracon is a Pulse & Datacom Transformer with 2 functions and an isolation voltage of 2500V. It is used in LAN, 10/100 BASE-TX, and Ethernet applications.
ALANS100X1-1E30JT
ALANS100X1-1E30JT by Abracon is a Pulse & Datacom Transformer with 2500V isolation voltage. It has an inductance of 350uH and is used for LAN, 10/100 BASE-TX, and Ethernet applications.
ALANS100X1-2F30KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Isolation Voltage: 2500 V; Maximum Operating Temperature: 125 Cel; Inductance (Primary): 350 uH;
ALANS100X1-2F82DT
ALANS100X1-2F82DT by Abracon is a DATACOM TRANSFORMER with 2500V isolation voltage, 350uH inductance, and IEEE approval. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (5.6x6.9x12.8mm) and surface mounting feature. Operating temperature range from -40°C to 85°C ensures reliable performance in various environments.
ALANS100X1-2F82ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT; Additional Features: DIMENSION HEIGHT IS INCLUDE TERMINAL ALSO; Minimum Operating Temperature: 0 Cel;
ALANS100X1-2F82JT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH; Additional Features: DIMENSION HEIGHT IS INCLUDE TERMINAL ALSO;
ALANS100X1-2F82KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 2; Isolation Voltage: 2500 V; Application: LAN; 10/100 BASE-TX; ETHERNET;
ALAN-2301
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
ALANL100X1-DE12DT
ALANL100X1-DE12DT by Abracon is a Datacom Transformer with 2 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (12.7x7.11x2.15mm) and surface mount feature. Operating temperature range from -40°C to 85°C ensures reliable performance in various environments.
ALANL100X1-EF10JT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100 BASE-TX; ETHERNET; Length: 12.7 mm; Width: 7.11 mm; Packing Method: TR, 13 INCH;
ALAN-101T
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ALAN-101; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH; Width: 6.87 mm;
ALAN-2302
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 13 INCH; Minimum Operating Temperature: -40 Cel; Width: 14.2 mm;
ALANS100X1-1E10LT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 2; Inductance (Primary): 350 uH; Width: 11.7 mm;
ALANS100X1-2F30DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Width: 6.9 mm; No. of Functions: 1; Minimum Operating Temperature: -40 Cel;
ALAN1100X1-2F00DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: 10/100 BASE-TX; Height: 4.6 mm; Isolation Voltage: 1500 V; Packing Method: TR, 13 INCH;
ALANL100X1-EF10ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 7.11 mm; Isolation Voltage: 1500 V; Maximum Operating Temperature: 70 Cel; Packing Method: TR, 13 INCH;
ALANS10001-3J61KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: 10/100/1000 BASE-T; Maximum Operating Temperature: 125 Cel; No. of Functions: 4; Packing Method: TR, 13 INCH;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved