Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALANS100X1-1E10JT by Abracon is a Pulse & Datacom Transformer with 2 functions and an isolation voltage of 2500V. It is used in LAN, 10/100 BASE-TX, and Ethernet applications.
Median Price
$2.537
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Aranea Global
$2.487
$2.387
AZTECH Wire
$13.194
Ampacity Inc.
$926.000
IEEE approval ensures that the product meets international standards for quality and safety, giving peace of mind to customers.
Having multiple functions in a single transformer can save space on a circuit board and simplify the overall design.
High isolation voltage provides better protection against voltage spikes and improves the reliability of the product.
The inductance value helps in filtering out noise and providing stable signal transmission in datacom applications.
The TR packing method ensures that the product is securely packaged and protected during transportation.
This transformer is specifically designed for LAN and Ethernet applications, ensuring compatibility and optimized performance.
With a high maximum operating temperature, this transformer can withstand heat and maintain performance in demanding environments.
The ability to operate at low temperatures makes this transformer suitable for a wide range of operating conditions.
Compact height allows for easy integration into tight spaces, making it ideal for modern electronic devices with space constraints.
Narrow width saves PCB space, making this transformer suitable for compact electronic designs.
Specifically designed for datacom applications, this transformer offers optimized performance in data transmission.
Surface mount feature simplifies the assembly process and allows for automated manufacturing, reducing production costs.
Optimal length for fitting into standard PCB designs, ensuring easy integration and compatibility with existing layouts.
The balanced turns ratio provides efficient signal transmission and impedance matching, enhancing overall performance in data communication.
Pulse & Datacom Transformers ALANS100X1-1E10JT attributes and parameters. Explore more Pulse & Datacom Transformers devices from Abracon
Additional Features:
Application:
Approvals (V):
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
ALANS100X1-1E10JT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
EU2B-YS3203C
Idec
ROTARY SWITCH;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Rfe International
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
TST-9007
Data Device
TST-9007 by Data Device is a DATACOM TRANSFORMER with Impedance of 3000Ω, Isolation Voltage of 100V, and Max Pulse Rise Time of 200ns. Ideal for applications requiring THROUGH HOLE MOUNTED transformers with load resistance of 4Ω and turns ratio options of 1:2.5 or 1:1.79.
ALT3232M-151-T001
TDK
ALT3232M-151-T001 by TDK is a 150 uH inductance pulse transformer for LAN applications. With dimensions of L3.2xB3.2xH2.8 mm, it operates b/w -40 to 85 °C and has a turns ratio of 1CT:1CT. This surface mount transformer is ideal for 10/1000 BASE-T and 100 BASE-TX networks.
T60403-K5024-X044
Vacuumschmelze & Kg
T60403-K5024-X044 by Vacuumschmelze & Kg is a pulse transformer with inductance of 750 uH, dimensions L13.9xB11.0xH7.1 mm, and turns ratio of 1:1. It is designed for datacom applications, operates b/w -40 to 85 °C, and features surface mounting method.
H1164NLT
Pulse Electronics
H1164NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w 0-70°C, and has IEEE approval. Ideal for surface mount installations with dimensions of L28.58xB12.19xH5.84 mm.
IT255
Schaffner Holding Ag
IT255 by Schaffner Holding Ag is a UL approved pulse transformer with 750V isolation voltage, 1100ns max pulse rise time, and 2200uH primary inductance. Ideal for datacom applications due to its compact dimensions of L17.6xB16.7xH11.3 (mm) and operating temperature range from -25°C to 70°C.
M21038/27-07
Pico Electronics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 130 Cel; Width: 8.89 mm;
78250MC-R
C&d Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78250; Terminal Finish: Tin (Sn); Height: 6.35 mm; Application: GENERAL PURPOSE;
SM51589PEL
Bourns
Bourns SM51589PEL is a 4-function datacom transformer with 5000V isolation voltage and 350uH primary inductance. Ideal for 10/100/1000 BASE-T, Ethernet, and LAN applications. Compact at L17.55xB12.2xH6.0mm, surface mountable with Tin terminal finish for -40 to 85°C operation.
H5019NLT
H5019NLT by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It is designed for 1000 BASE-T applications, featuring dimensions of L19.81xB16.64xH2.54 mm and operating temperatures from 0 to 70°C. The transformer type is surface mount with turns ratio of 1:1; 1:1, packed in TAPE & REEL format.
HX2019NLT
HX2019NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 turns ratio, 1500V isolation voltage, and 1.2dB insertion loss. It is designed for 10/100 BASE-TX Ethernet applications, operates b/w -40°C to 85°C, and comes in L12.70xB7.11xH5.97 mm dimensions for surface mount installation.
PT61018AAPEL-S
Bourns PT61018AAPEL-S is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 5.65mm x 6.9mm x 12.8mm.
78250MVC
Murata Manufacturing
78250MVC by Murata Manufacturing is a UL-approved Pulse & Datacom Transformer with 1500V isolation voltage, 2000uH inductance, and 50 V-us min ET product. It is used for ISOLATION applications, operates b/w -40 to 85 °C, and features matte tin terminal finish.
78250MVC-R
Murata's 78250MVC-R is a DATACOM TRANSFORMER with 1000uH inductance, UL approval, and 4000V isolation voltage. Ideal for RS-232 DATA INTERFACE applications, it operates b/w -40 to 85°C temperatures. Dimensions are L9.0xB9.52xH6.35 mm with matte tin finish and surface mount feature.
78250MC
78250MC by Murata Manufacturing is a Pulse & Datacom Transformer with 1500V isolation voltage, 1000uH inductance, and 50V-us min ET product. It is used for RS-232 data interface applications, operates b/w -40 to 85 °C temperatures, and features surface mounting method.
96046123239
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 2; Isolation Voltage: 1875 V; Packing Method: TRAY; Maximum Operating Temperature: 85 Cel;
78253/55MVC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78253; Terminal Finish: Tin (Sn); No. of Functions: 1; Application: GENERAL PURPOSE;
IL-20-0001
Schurter Ag
IL-20-0001 by Schurter Ag is a 1.1W Pulse Transformer with 4000V isolation voltage and 1500ns max pulse rise time. Ideal for datacom applications, it features inductance of 3000uH, operates b/w -25 to 70°C, and has dimensions of L28.0xB23.0xH14.0mm for through-hole mounting.
PM-DB2745L
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Dimensions: L16.0XB16.0XH3.937 (mm); Maximum Operating Temperature: 130 Cel; Width: 16 mm;
750311590
Wuerth Elektronik & Kg
Wurth Elektronik 750311590 is a Pulse & Datacom Transformer with 1500V isolation voltage, 8uH primary inductance, and 3.8A output current. Ideal for data communication applications due to its surface mounting feature and compact dimensions of L32.31xB27.03xH13.69 (mm).
HM2102NLT
HM2102NLT by Pulse Electronics is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 4300V. With inductance of 450uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALANC10001-CDB3DT
Abracon
ALANC10001-CDB3DT by Abracon is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 200uH Inductance, and 1CT:1CT Turns Ratio. Ideal for 10/100/1000 BASE-T, ETHERNET, and LAN applications due to its compact size and surface mount feature. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
ALANS10001-3J41ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 2500 V; Length: 18.1 mm; Application: 10/100/1000 BASE-T; Inductance (Primary): 350 uH;
ALAN210001-3J41DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100/1000 BASE-T; ETHERNET; Inductance (Primary): 350 uH; Width: 12.44 mm; Turns Ratio (Np:Ns): 1CT:1CT;
ALANS100X1-1E30JT
ALANS100X1-1E30JT by Abracon is a Pulse & Datacom Transformer with 2500V isolation voltage. It has an inductance of 350uH and is used for LAN, 10/100 BASE-TX, and Ethernet applications.
ALANS100X1-2F30KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Isolation Voltage: 2500 V; Maximum Operating Temperature: 125 Cel; Inductance (Primary): 350 uH;
ALANS100X1-2F82DT
ALANS100X1-2F82DT by Abracon is a DATACOM TRANSFORMER with 2500V isolation voltage, 350uH inductance, and IEEE approval. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (5.6x6.9x12.8mm) and surface mounting feature. Operating temperature range from -40°C to 85°C ensures reliable performance in various environments.
ALANS100X1-2F82ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT; Additional Features: DIMENSION HEIGHT IS INCLUDE TERMINAL ALSO; Minimum Operating Temperature: 0 Cel;
ALANS100X1-2F82JT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH; Additional Features: DIMENSION HEIGHT IS INCLUDE TERMINAL ALSO;
ALANS100X1-2F82KT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 2; Isolation Voltage: 2500 V; Application: LAN; 10/100 BASE-TX; ETHERNET;
ALAN-2301
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
ALANL100X1-DE12DT
ALANL100X1-DE12DT by Abracon is a Datacom Transformer with 2 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (12.7x7.11x2.15mm) and surface mount feature. Operating temperature range from -40°C to 85°C ensures reliable performance in various environments.
ALANL100X1-EF10JT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: LAN; 10/100 BASE-TX; ETHERNET; Length: 12.7 mm; Width: 7.11 mm; Packing Method: TR, 13 INCH;
ALAN-101T
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ALAN-101; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH; Width: 6.87 mm;
ALAN-2302
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 13 INCH; Minimum Operating Temperature: -40 Cel; Width: 14.2 mm;
ALANS100X1-1E10LT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 2; Inductance (Primary): 350 uH; Width: 11.7 mm;
ALANS10001-3J11ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: HEIGHT DIM INCLUDE TERMINAL ALSO; Width: 12.2 mm; Minimum Operating Temperature: 0 Cel; Packing Method: TR, 13 INCH;
ALANS100X1-2F30DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Width: 6.9 mm; No. of Functions: 1; Minimum Operating Temperature: -40 Cel;
ALAN1100X1-2F00DT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: 10/100 BASE-TX; Height: 4.6 mm; Isolation Voltage: 1500 V; Packing Method: TR, 13 INCH;
ALANL100X1-EF10ET
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 7.11 mm; Isolation Voltage: 1500 V; Maximum Operating Temperature: 70 Cel; Packing Method: TR, 13 INCH;
ALANS100X1-1E30DB
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 1; Height: 5 mm; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved