Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
SN74ALS652A-1DWR
Texas Instruments
SN74ALS652A-1DWR by Texas Instruments is an 8-bit bus driver with 3-STATE output characteristics. It operates at a nominal voltage of 5V, with a propagation delay of 18ns and max power supply current of 88mA. Ideal for bidirectional data transmission in commercial-grade applications.
SELECT INPUT FOR MULTIPLEXED TRANSMISSION OF REGISTERED/REAL TIME DATA
INDEPENDENT CONTROL
BIDIRECTIONAL
ALS
R-PDSO-G24
15.4 mm
50 pF
REGISTERED BUS TRANSCEIVER
48 Amp
8
1
2
24
70 Cel
0 Cel
3-STATE
TRUE
PLASTIC/EPOXY
SOP
SOP24,.4
RECTANGULAR
SMALL OUTLINE
TR
NOT SPECIFIED
5
88 mA
30 ns
Not Qualified
2.65 mm
Bus Driver/Transceivers
5.5 V
4.5 V
YES
TTL
COMMERCIAL
GULL WING
1.27 mm
DUAL
N/A
POSITIVE EDGE
7.5 mm
SN74HC646NT
SN74HC646NT by Texas Instruments is an 8-bit bus driver with a propagation delay of 34ns at 5V. It features 3-STATE output characteristics and operates b/w -40 to 85°C. Ideal for bidirectional control applications in industrial settings due to its CMOS technology and dual terminal position.
WITH DIRECTION CONTROL
HC/UH
R-PDIP-T24
e4
31.64 mm
150 pF
6 Amp
85 Cel
-40 Cel
DIP
DIP24,.3
IN-LINE
TUBE
2/6
330 ns
5.08 mm
6 V
2 V
NO
CMOS
INDUSTRIAL
NICKEL PALLADIUM GOLD
THROUGH-HOLE
2.54 mm
7.62 mm
SN74HC652NT
The Texas Instruments SN74HC652NT is an 8-bit bus driver with a propagation delay of 34ns at 5V. It features 3-STATE output characteristics and operates in industrial temperature range (-40 to 85°C). Ideal for bidirectional control applications with independent control, this CMOS technology device has a package size of 31.64mm x 7.62mm x 5.08mm.
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
Bus Driver/Transceiver
SN74F543DBLE
SN74F543DBLE by Texas Instruments is an 8-bit bus driver with a propagation delay of 8.5 ns at 5V, suitable for bidirectional applications. It features a max I (ol) of 64A, operates b/w 0-70°C, and has a small outline package style for surface mount assembly.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
F/FAST
8.2 mm
64 Amp
SSOP
SSOP24,.3
SMALL OUTLINE, SHRINK PITCH
125 mA
12.5 ns
2 mm
.65 mm
5.3 mm
SN74BCT543DWR
SN74BCT543DWR by Texas Instruments is an 8-bit bus driver with a propagation delay of 9.6 ns at 5V, suitable for bidirectional applications. It features a max I (ol) of 64A, operates b/w 0-70°C, and has independent control with a terminal pitch of 1.27mm.
BCT/FBT
71 mA
12.7 ns
BICMOS
74ACT11374DBLE
74ACT11374DBLE by Texas Instruments is an 8-bit bus driver with a supply voltage of 5V, operating at temperatures from -40 to 85°C. It features a propagation delay of 13ns, output polarity TRUE, and supports a max frequency of 55MHz. Ideal for industrial applications requiring high-speed data transmission in compact spaces.
ACT
BUS DRIVER
55000000 Hz
24 Amp
13 ns
FF/Latches
74AC11245DWR
74AC11245DWR by Texas Instruments is an 8-bit bus driver with a propagation delay of 9.5 ns, suitable for industrial applications. It operates at a nominal voltage of 5V and has a load capacitance of 50 pF. This surface-mount device features dual terminal position and GULL WING form factor.
COMMON CONTROL
AC
BUS TRANSCEIVER
260
3.3/5
.08 mA
9.5 ns
3 V
30
74ACT11245DWR
74ACT11245DWR by Texas Instruments is an 8-bit bus driver with a propagation delay of 10 ns at 5V. It features a 3-STATE output and operates in industrial temperature range. Ideal for bidirectional control applications, this CMOS technology chip has a small outline package with dual terminals.
9.1 ns
Nickel/Palladium/Gold (Ni/Pd/Au)
SN64BCT25244DWR
SN64BCT25244DWR by Texas Instruments is a 4-bit bus driver with 6.3ns propagation delay, suitable for industrial applications. It operates at a supply voltage of 5V and has a max power supply current of 119mA. With surface mount capability and dual terminal position, it offers efficient signal transmission in compact designs.
25 OHM INCIDENT WAVE SWITCHING; POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION
ENABLE LOW
188 Amp
4
119 mA
6.3 ns
SN74BCT25244DWR
SN74BCT25244DWR by Texas Instruments is a 24-terminal bus driver with 6ns propagation delay, suitable for commercial applications. It operates at a nominal voltage of 5V and has a load capacitance of 50pF. This dual-function device features a small outline package style and Gull Wing terminal form, making it ideal for surface mount applications.
25 OHM INCIDENT WAVE SWITCHING
UNIDIRECTIONAL
6 ns
SN74BCT25245DWR
SN74BCT25245DWR by Texas Instruments is an 8-bit bus driver with a propagation delay of 7.2 ns at 5V, suitable for bidirectional applications. It features a small outline package, operates b/w 0-70°C, and supports a max supply voltage of 5.5V. Ideal for systems requiring fast signal transmission in commercial-grade environments.
DIRECTION CONTROL; IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT B
7.2 ns
SN74BCT2827CDWR
SN74BCT2827CDWR by Texas Instruments is a 10-bit bus driver with 7.8 ns propagation delay at 5V, suitable for commercial applications. It features a small outline package, 3-state output with series resistor, and operates b/w 0 to 70°C temperature range.
DUAL OUTPUT ENABLE; 25 OHM OUTPUT SERIES RESISTOR
12 Amp
10
3-STATE WITH SERIES RESISTOR
40 mA
7.8 ns
SN74BCT29834DWR
SN74BCT29834DWR by Texas Instruments is an 8-bit bus driver with a propagation delay of 21ns at 5V. It features open-collector output, operates b/w 0-70°C, and has a max supply voltage of 5.5V. Ideal for bidirectional control applications requiring independent control in commercial temperature grade environments.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; PARITY GENERATION A TO B; ERROR DETECTION B TO A
OPEN-COLLECTOR
INVERTED
80 mA
8 ns
74ACT11623DWR
74ACT11623DWR by Texas Instruments is an 8-bit bus driver with a propagation delay of 8.5 ns at 5V, suitable for industrial applications. It features a small outline package style, true output polarity, and independent control, making it ideal for bidirectional data transmission in electronic systems.
.04 mA
8.5 ns
SN74ALS667NT3
SN74ALS667NT3 by Texas Instruments is an 8-bit bus driver with a propagation delay of 20 ns at 5V. It features a max I (ol) of 24A and operates within a temperature range of 0-70°C. Ideal for applications requiring fast signal transmission in commercial-grade environments.
WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK
79 mA
28 ns
SN74ALS651-1NT3
SN74ALS651-1NT3 by Texas Instruments is an 8-bit bus driver with a 5V supply voltage, 50 pF load capacitance, and 17 ns propagation delay. It features a TTL technology, operates bidirectionally with independent control, and has a max power supply current of 82 mA. Ideal for applications requiring inverted output polarity in commercial temperature grades.
82 mA
17 ns
SNJ54AS873AJT
SNJ54AS873AJT by Texas Instruments is a TTL technology bus driver with 2 functions, 4 bits, and 3-STATE output characteristics. It operates at a supply voltage of 5V with a propagation delay of 9ns, making it suitable for military-grade applications requiring fast signal transmission in harsh environments. The package style is IN-LINE with through-hole terminals and a max seated height of 5.08mm.
WITH CLEAR
AS
R-GDIP-T24
32.005 mm
32 Amp
125 Cel
-55 Cel
CERAMIC, GLASS-SEALED
110 mA
9 ns
MIL-PRF-38535
MILITARY
SNJ54BCT646JT
SNJ54BCT646JT by Texas Instruments is an 8-bit bus driver with a propagation delay of 10.5 ns and operates at a nominal voltage of 5V. It features a MIL-PRF-38535 screening level, suitable for military-grade applications requiring true output polarity and independent control in a compact rectangular package.
DIRECTION CONTROL; SELECT INPUT FOR MULTIPLEXED TRANSMISSION OF REGISTERED/ REAL TIME DATA
e0
67 mA
12.4 ns
Tin/Lead (Sn/Pb)
SNJ54AS646JT
SNJ54AS646JT by Texas Instruments is an 8-bit bus driver with a propagation delay of 20ns at 5V. It features a MIL-PRF-38535 screening level and operates in a temperature range from -55 to 125°C. Ideal for bidirectional control applications, this TTL technology device has dual terminals and supports independent control.
WITH DIRECTION CONTROL; WITH SELECT INPUT FOR MULTIPLEXED TRANSMISSION OF REGISTERED OR REAL TIM
211 mA
10 ns
TIN LEAD
SNJ54BCT543JT
SNJ54BCT543JT by Texas Instruments is an 8-bit bus driver with a propagation delay of 9.6 ns and operates at a supply voltage of 5V. It features MIL-PRF-38535 screening level, 3-STATE output characteristics, and is ideal for military-grade applications requiring bidirectional control in a ceramic package.
13.2 ns
SNJ54AS652JT
SNJ54AS652JT by Texas Instruments is an 8-bit bus driver with a propagation delay of 18ns at 5V. It features a MIL-PRF-38535 screening level and operates b/w -55°C to 125°C. Ideal for military-grade applications requiring independent control and positive edge triggering in a compact IN-LINE package.
11 ns
SN74ABT8245DWR
SN74ABT8245DWR by Texas Instruments is an 8-bit bus driver with a propagation delay of 5.1 ns and a max operating temperature of 85°C. It features a 3-STATE output characteristic, suitable for bidirectional control applications in industrial settings. The package style is small outline, making it ideal for surface mount installations with a terminal pitch of 1.27 mm.
ABT
BOUNDARY SCAN BUS TRANSCEIVER
38 mA
5.1 ns
SN74ABT8245DW
SN74ABT8245DW by Texas Instruments is an 8-bit bus driver with a propagation delay of 5.1 ns at 5V, suitable for industrial applications. It features a 3-STATE output and operates within a temperature range of -40 to 85°C. This small outline package has dual terminals and supports bidirectional communication with common control.
SNJ54AS825AJT
SNJ54AS825AJT by Texas Instruments is an 8-bit bus driver with a 5V supply voltage, 32A max I (ol), and 13.5ns propagation delay. It is ideal for military applications requiring true output polarity, positive edge trigger type, and a max frequency of 52.6MHz at nominal voltage.
WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLE
52600000 Hz
90 mA
13.5 ns
SNJ54ABT8245JT
SNJ54ABT8245JT by Texas Instruments is an 8-bit bus driver with a propagation delay of 5.8 ns and operates at a nominal voltage of 5V. It features a MIL-PRF-38535 screening level, suitable for military-grade applications requiring fast signal transmission and low power consumption. With a package style of IN-LINE, this device is ideal for bidirectional data communication in harsh environments.
5.5 ns
SNJ54BCT8373AJT
SNJ54BCT8373AJT by Texas Instruments is an 8-bit bus driver with a propagation delay of 9.5 ns and max frequency of 20 MHz. It operates at a supply voltage of 5V, suitable for military-grade applications requiring true output polarity and 3-STATE output characteristics.
ENABLE LOW/HIGH
BOUNDARY SCAN BUS DRIVER
20000000 Hz
52 mA
SN74ACT11245DBLE
SN74ACT11245DBLE by Texas Instruments is an 8-bit bus driver with a propagation delay of 9.1 ns, suitable for industrial applications. It operates at a supply voltage range of 4.5V to 5.5V and has a temperature range from -40°C to 85°C. This surface-mount device features dual terminals in a small outline package, making it ideal for compact designs requiring fast signal transmission.
SN74ABT843DWR
SN74ABT843DWR by Texas Instruments is a 9-bit bus driver with 3-STATE output characteristics. It features a propagation delay of 6.9 ns at 5V, making it suitable for high-speed applications. With a small outline package style and dual terminal position, it is ideal for industrial temperature grade environments.
WITH CLEAR AND PRESET
9
34 mA
6.9 ns
SNJ54ABT843JT
SNJ54ABT843JT by Texas Instruments is a 9-bit bus driver with 7.8 ns propagation delay, suitable for military applications. It operates at a nominal voltage of 5V, has a load capacitance of 50 pF, and features a max power supply current of 34 mA.
SN74ABT646ADBLE
SN74ABT646ADBLE by Texas Instruments is an 8-bit bus driver with a propagation delay of 5.4 ns, operating at a nominal voltage of 5V. It features a small outline package style and is designed for bidirectional control applications in industrial settings.
30 mA
5.6 ns
SNJ54ABT646AJT
SNJ54ABT646AJT by Texas Instruments is an 8-bit bus driver with a propagation delay of 5.4 ns and operates at a supply voltage of 5V. It features a MIL-PRF-38535 screening level, 3-STATE output characteristics, and is ideal for bidirectional control applications in military-grade environments.
6.7 ns
10.16 mm
SN74ABT2827DWR
SN74ABT2827DWR by Texas Instruments is a 10-bit bus driver with 5.5 ns propagation delay at 5V, suitable for industrial applications. It features a 3-STATE output with series resistor, operates b/w -40 to 85°C, and has a max supply voltage of 5.5V. This small outline package with dual terminals is ideal for driving buses in electronic systems requiring fast signal transmission.
WITH DUAL OUTPUT ENABLE
SN74ABT2827DW
SN74ABT2827DW by Texas Instruments is a 10-bit bus driver with 5.5 ns propagation delay, suitable for industrial applications. It operates at a nominal voltage of 5V and features a max power supply current of 40mA. With surface mount capability and dual terminal position, it offers reliable performance in various electronic systems.
SNJ54ABT2952AJT
SNJ54ABT2952AJT by Texas Instruments is an 8-bit bus driver with a propagation delay of 6.3 ns, operating at a voltage of 5V. It features a MIL-PRF-38535 screening level and offers true output polarity. Ideal for military-grade applications requiring bidirectional control with independent control capabilities.
35 mA
6.8 ns
SN74ABT543APWLE
SN74ABT543APWLE by Texas Instruments is an 8-bit bus driver with a propagation delay of 6.9 ns and operates at a nominal voltage of 5V. It features a small outline package, dual terminal position, and independent control, making it ideal for bidirectional data transmission in industrial applications.
7.8 mm
TSSOP
TSSOP24,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
7.1 ns
1.2 mm
4.4 mm
SN74ABT861DWR
SN74ABT861DWR by Texas Instruments is a 10-bit bus driver with 5.2 ns propagation delay, suitable for industrial applications. It operates at a nominal voltage of 5V, has a load capacitance of 50 pF, and features independent control with true output polarity.
4.9 ns
SN74ABT861NT
SN74ABT861NT by Texas Instruments is a 10-bit bus driver with 5.2 ns propagation delay, ideal for industrial applications. Featuring 3-STATE output characteristics and independent control, it operates at a voltage range of 4.5V to 5.5V with a max power supply current of 38 mA.
SN74ABT841ADWR
SN74ABT841ADWR by Texas Instruments is a 10-bit bus driver with 6.2 ns propagation delay at 5V, ideal for industrial applications. It features a 3-STATE output, operates b/w -40 to 85 °C, and has a max power supply current of 38 mA. This small outline package has dual terminal position and nickel palladium gold finish for surface mount assembly.
SN74ABT841ADW
SN74ABT841ADW by Texas Instruments is a 10-bit bus driver with 6.2 ns propagation delay at 5V, suitable for industrial applications. It features 3-STATE output characteristics, operates b/w -40 to 85 °C, and has a max power supply current of 38 mA. This small outline package with gull wing terminals is designed for unidirectional data transmission in electronic systems.
SNJ54ABT821JT
SNJ54ABT821JT by Texas Instruments is a 10-bit bus driver with 6.9 ns propagation delay, suitable for military applications. It operates at a supply voltage of 5V and has a max frequency of 125MHz, making it ideal for high-speed data transmission in harsh environments. With a MIL-PRF-38535 screening level and through-hole terminal form, this BICMOS technology device ensures reliable performance in rugged conditions.
TYP VOLP < 1V @ VCC = 5V, TA = 25 DEG C
125000000 Hz
SNJ54ABT841JT
SNJ54ABT841JT by Texas Instruments is a 10-bit bus driver with 3-STATE output, featuring a propagation delay of 7.4 ns and max I (ol) of 48 Amp. Ideal for military applications, it operates in temperatures ranging from -55 to 125 °C and has a package style of IN-LINE.
45 mA
7.4 ns
SNJ54AC11241JT
SNJ54AC11241JT by Texas Instruments is a CMOS bus driver with 2 functions, 4 bits, and 3-STATE output. It operates at temperatures from -55°C to 125°C and supports power supplies of 3.3V/5V. Ideal for military applications requiring ENABLE LOW/HIGH control in a ceramic package with 24 terminals.
R-XDIP-T24
CERAMIC
38535Q/M;38534H;883B
SN74ABT823NT
SN74ABT823NT by Texas Instruments is a 9-bit bus driver with 3-STATE output characteristics. It operates at a max frequency of 125MHz, with a propagation delay of 6.8ns and can handle load capacitance up to 50pF. Ideal for industrial applications requiring reliable signal transmission in a compact package.
WITH CLEAR AND CLOCK ENABLE
SN74ABT651NT
SN74ABT651NT by Texas Instruments is an 8-bit bus driver with a propagation delay of 6.2 ns at 5V, featuring a 3-STATE output and inverted polarity. It operates in industrial temperatures (-40 to 85 °C) with a max supply voltage of 5.5V, making it suitable for bidirectional control applications requiring independent control.
SN74ABT651DWR
SN74ABT651DWR by Texas Instruments is an 8-bit bus driver with a propagation delay of 5.6 ns and output polarity inverted. It operates at a nominal voltage of 5V, has a load capacitance of 50 pF, and features independent control for bidirectional count direction. Ideal for industrial applications requiring fast signal transmission in compact spaces.
74LCX646TTR
STMicroelectronics
74LCX646TTR by STMicroelectronics is an 8-bit bus driver with a propagation delay of 7 ns at 2.7-3.3V, featuring a small outline package and dual terminal position. It operates bidirectionally with independent control, suitable for military-grade applications requiring fast signal transmission in compact spaces.
LVC/LCX/Z
3
3.3
1.1 mm
3.6 V
2.7
SN74ALS29818NT
SN74ALS29818NT by Texas Instruments is an 8-bit bus driver with a propagation delay of 30ns. It operates at a supply voltage range of 4.75V to 5.25V and has a temperature range of 0°C to 70°C. This CMOS technology device is ideal for applications requiring true output polarity and dual terminal positions in commercial-grade environments.
DIAGNOSTIC SCAN REGISTER WITH SELECTABLE SERIAL & PARALLEL DATA I/PS
5.25 V
4.75 V
SN74ALS29861DWR
SN74ALS29861DWR by Texas Instruments is a 10-bit bus driver with 3-STATE output, operating at 5V. It features a propagation delay of 15ns and supports bidirectional count direction. Ideal for applications requiring independent control of two ports in commercial temperature grade environments.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
65 mA
15 ns
© 2023 All rights reserved
