Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MAX4465EXK-T
Maxim Integrated
MAX4465EXK-T by Maxim Integrated is an audio preamplifier with 0.02% harmonic distortion, operating at 2.4-5.5V. It has a small outline package, suitable for industrial applications like audio amplification in compact devices due to its low power consumption of 0.06mA and wide bandwidth of 0.2kHz.
.2 kHz
AUDIO PREAMPLIFIER
.02 %
R-PDSO-G5
e0
2 mm
1
5
85 Cel
-40 Cel
PLASTIC/EPOXY
TSSOP
TSSOP5/6,.08
RECTANGULAR
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
2.4/5.5
Not Qualified
1.1 mm
Audio/Video Amplifiers
.06 mA
5.5 V
2.4 V
YES
BICMOS
INDUSTRIAL
TIN LEAD
GULL WING
.65 mm
DUAL
1.25 mm
MAX4466EUK-T
MAX4466EUK-T by Maxim Integrated is an audio preamplifier with 0.02% harmonic distortion, operating b/w -40 to 85°C. It has a supply voltage range of 2.4-5.5V and a bandwidth of 0.6 kHz. Ideal for applications requiring low profile amplification in industrial settings.
.6 kHz
2.9 mm
LSSOP
TSOP5/6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
.95 mm
1.625 mm
MAX4466EXK-T
MAX4466EXK-T by Maxim Integrated is an audio preamplifier with a small outline, thin profile package. It has a nominal bandwidth of 0.6 kHz and low harmonic distortion of 0.02%. This IC is commonly used in audio and video amplifiers for applications requiring high-quality sound amplification.
AD830AR
Analog Devices
AD830AR by Analog Devices is a video amplifier with +-5/+-15 V power supplies, 85 kHz bandwidth, and 17 mA max supply current. It is used in audio/video applications due to its small outline package style and industrial temperature grade suitability.
85 kHz
VIDEO AMPLIFIER
R-PDSO-G8
4.9 mm
8
SOP
SOP8,.25
SMALL OUTLINE
240
+-5/+-15
1.75 mm
17 mA
16.5 V
4 V
HYBRID
1.27 mm
3.9 mm
AD830JR-REEL
AD830JR-REEL by Analog Devices is a video amplifier with +-5/+-15V power supplies, 85 kHz bandwidth, and 17mA max supply current. Ideal for audio/video applications, it operates b/w 0-70°C and features a small outline package style for surface mount assembly.
70 Cel
0 Cel
COMMERCIAL
TAS5707PHPR
Texas Instruments
TAS5707PHPR by Texas Instruments is a 20W audio amplifier with 2 channels. It operates at temperatures from 0 to 85°C and has a harmonic distortion of 10%. Suitable for applications requiring high-quality audio amplification in compact spaces due to its small form factor and low noise figure of 106dB.
ALSO REQUIRES 3.3V DIGITAL SUPPLY
.02 kHz
AUDIO AMPLIFIER
10 %
S-PQFP-G48
e4
7 mm
3
106 dB
2
48
20 W
HTFQFP
TQFP48,.35SQ
SQUARE
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
260
3.3,18
1.2 mm
83 mA
3.6 V
3 V
OTHER
NICKEL PALLADIUM GOLD
.5 mm
QUAD
30
TAS5708PHPR
TAS5708PHPR by Texas Instruments is a 2-channel audio amplifier with 20.2W output power. Operating at 3-3.6V, it has a max temperature of 85°C and requires only 77mA supply current. Ideal for applications requiring compact design and high-quality audio amplification in consumer electronics or automotive systems.
20.2 W
3.3,12/18
77 mA
TAS5708PHP
TAS5708PHP by Texas Instruments is a 2-channel audio amplifier with 20.2W output power. It operates at 3-3.6V, has 48 terminals, and supports surface mount installation. Ideal for applications requiring compact design and high-quality audio amplification in consumer electronics or automotive systems.
TAS5709PHPR
TAS5709PHPR by Texas Instruments is an audio amplifier with 2 channels and 20.6W output power. It operates at a voltage range of 3-18V, with harmonic distortion of 10%. Suitable for applications requiring high-quality audio amplification in compact spaces due to its small form factor and low power consumption.
20.6 W
TDA7491LP
STMicroelectronics
TDA7491LP by STMicroelectronics is a 5W audio amplifier with 10% harmonic distortion, operating at 9V. It has 2 channels, gain of 32dB, and nominal bandwidth of 0.022 kHz. Ideal for commercial applications requiring small outline package with dual terminals and surface mount capability.
.022 kHz
32 dB
R-PDSO-G36
e3
10.3 mm
36
5 W
HSSOP
SSOP36,.4,20
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
9
2.47 mm
35 mA
14 V
5 V
BIPOLAR
Matte Tin (Sn) - annealed
7.5 mm
TDA7491MV
TDA7491MV by STMicroelectronics is a 20W audio amplifier with 10% harmonic distortion, operating at 5-18V. With 2 channels and gain of 32dB, it's ideal for small outline applications in commercial temperature range up to 70 °C.
18
18 V
TDA7491P
TDA7491P by STMicroelectronics is a 10W audio amplifier IC with 2 channels. It operates b/w 0-70°C, has a gain of 32dB, and low harmonic distortion at 10%. Suitable for small outline applications, it requires a supply voltage of 5-18V and has a nominal bandwidth of 0.022 kHz.
10 W
11
TAS5710PHPR
TAS5710PHPR by Texas Instruments is a 2-channel audio amplifier with a nominal output power of 20.2W. It operates b/w 10-26V, has a max temperature of 85°C, and requires only 77mA supply current. Ideal for compact audio applications due to its small form factor and surface-mount capability in plastic/epoxy package.
26 V
10 V
TAS5414ATPHDMQ1
TAS5414ATPHDMQ1 by Texas Instruments is an audio amplifier IC with 4 channels, offering a nominal output power of 116W. It operates in industrial temperature range (-40 to 105°C) and supports supply voltage from 8V to 22V. With a compact package style (14x14mm), it's ideal for automotive audio systems requiring high power and performance.
S-PQFP-G64
14 mm
4
64
105 Cel
116 W
HTQFP
TQFP64,.63SQ,32
FLATPACK, HEAT SINK/SLUG, THIN PROFILE
14.4
AEC-Q100
300 mA
22 V
8 V
.8 mm
THS3122CDDARG3
THS3122CDDARG3 by Texas Instruments is a video amplifier with 2 functions, operating at 0-70°C. It has a bandwidth of 160 kHz, suitable for audio & video applications. This IC comes in an 8-terminal rectangular package, measuring 4.89mm x 3.9mm x 1.68mm and supports supply voltage from 5V to 15V.
IT CAN ALSO OPERATE WITH SINGLE 10V TO 30 V SUPPLY
160 kHz
4.89 mm
HLSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
NOT SPECIFIED
1.68 mm
15 V
THS3122IDDARG3
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
TAS5706BPAPR
TAS5706BPAPR by Texas Instruments is a surface mount audio amplifier with 2 channels and a nominal output power of 20W. It operates at a min supply voltage of 3V and has a max operating temperature of 85°C. This amplifier is commonly used in audio and video applications.
10 mm
99 dB
TQFP64,.47SQ
80 mA
BUF602IDR
BUF602IDR by Texas Instruments is a dual-function video amplifier with 8 terminals in a small outline package. It features bipolar technology, industrial temperature grade, and gull wing terminal form. Ideal for audio/video applications requiring surface mount compatibility and compact design.
THS4271DRG4
THS4271DRG4 by Texas Instruments is an 8-terminal video preamplifier with a supply voltage range of 2.5V to 7.5V, operating b/w -40°C to 85°C. It comes in a small outline package style suitable for surface mount applications in audio and video amplifiers.
IT CAN ALSO OPERATE WITH 5V TO 15 V SINGLE SUPPLY
VIDEO PREAMPLIFIER
7.5 V
2.5 V
NCV2890DMR2G
Onsemi
NCV2890DMR2G by Onsemi is an audio amplifier IC with 8 terminals, operating voltage of 2.2-5.5V, and output power of 1.08W. It is designed for industrial applications, featuring a small outline package with thin profile suitable for surface mount assembly in audio and video amplifiers.
S-PDSO-G8
3 mm
1.08 W
TSSOP8,.19
2.5/5
5.5 mA
2.2 V
TIN
TS4990ID
TS4990ID by STMicroelectronics is a compact audio amplifier with 1.2 W output power, operating b/w 2.6-5 V supply voltage. It features low harmonic distortion at 1% and operates in extreme temperatures from -40 °C to 85°C, ideal for industrial applications. Its small outline design ensures easy surface mounting in various devices.
1 %
1.2 W
2.6/5
6 mA
TPA3107D2PAPR
TPA3107D2PAPR by Texas Instruments is a 15W audio amplifier IC with 2 channels, operating at temperatures from -40 to 85°C. It features a CMOS technology, 6dB gain, and operates on power supplies of 10-26V. Ideal for industrial applications requiring high-quality audio amplification in a compact square package.
6 dB
102 dB
15 W
QFP64,.47SQ,20
12/24
26.5 mA
CMOS
TPA3107D2PAPT
TPA3107D2PAPT by Texas Instruments is a 15W audio amplifier with 2 channels, operating at -40 to 85°C. It has a gain of 36dB and supports power supplies from 10-26V, making it ideal for industrial audio applications requiring high-quality sound amplification in compact spaces.
36 dB
TPA3107D2PAP
TPA3107D2PAP by Texas Instruments is a 2-channel audio amplifier with 15W output power. It operates on 12/24V supplies, has a gain of 36dB, and CMOS technology. Suitable for industrial applications, it features a compact square package with a low profile and thin design for easy mounting in audio and video systems.
TPA3107D2PAPRG4
TPA3107D2PAPRG4 by Texas Instruments is a 15W audio amplifier IC with 2 channels, operating at temperatures from -40 to 85°C. It features a CMOS technology, 36dB gain, and a nominal noise figure of 102dB. Ideal for industrial applications requiring high-quality audio amplification in compact spaces.
TPA3107D2PAPTG4
TPA3107D2PAPTG4 by Texas Instruments is a 15W audio amplifier IC with 2 channels. It operates at -40 to 85°C, suitable for industrial use. With a gain of 36dB and nominal bandwidth of 0.022kHz, it's ideal for audio applications requiring high power output.
THS3201DBVRG4
THS3201DBVRG4 by Texas Instruments is a small outline video amplifier with 5 terminals. It operates b/w -40 to 85°C, with a bandwidth of 1800 kHz. Ideal for audio/video applications requiring a supply voltage range of 3.3V to 7.5V in industrial settings.
IT CAN ALSO OPERATE WITH 6.6V TO 15V SINGLE SUPPLY
1800 kHz
3.3 V
1.6 mm
THS3201DG4
THS3201DG4 by Texas Instruments is an 8-terminal video amplifier with a bandwidth of 1800 kHz. Operating b/w -40 to 85°C, it supports supply voltages from 3.3V to 7.5V. Ideal for industrial applications requiring small outline packages and surface mount capabilities.
Nickel/Palladium/Gold (Ni/Pd/Au)
THS3201DRG4
THS3201DRG4 by Texas Instruments is an 8-terminal video amplifier with a bandwidth of 1800 kHz, operating b/w -40 to 85°C. It has a supply voltage range of 3.3V to 7.5V and is ideal for audio/video applications requiring small outline packages in industrial settings.
THS3202DG4
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
10 dB
TAS5132DDVG4
TAS5132DDVG4 by Texas Instruments is an audio amplifier with 50W output power, 10% harmonic distortion, and 2 channels. It operates b/w 0-70°C, with supply voltage range of 10.8-13.2V. Ideal for applications requiring high-quality audio amplification in compact spaces.
R-PDSO-G44
44
50 W
HTSSOP
TSSOP44,.33
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
12,18
9 mA
13.2 V
10.8 V
.635 mm
6.1 mm
TAS5132DDV
TAS5132DDV by Texas Instruments is an audio amplifier IC with 20W output power, 10% harmonic distortion, and 105dB noise figure. It has a small outline package suitable for surface mount applications in commercial-grade temperature environments.
105 dB
TAS5162DDVR
TAS5162DDVR by Texas Instruments is a 200W audio amplifier with 10% harmonic distortion. It operates b/w 0-70°C, has a supply voltage range of 10.8-13.2V, and features a small outline package for surface mounting applications in audio and video systems.
ALSO REQUIRES 50 V SUPPLY
112 dB
200 W
12,50
TAS5162DDV
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: HTSSOP; Package Shape: RECTANGULAR;
TAS5162DKDR
TAS5162DKDR by Texas Instruments is a 200W audio amplifier with 10% harmonic distortion. It operates b/w 0-70°C, requires 10.8-13.2V power supply, and has dual terminals for commercial applications in audio and video amplifiers.
15.9 mm
SSOP36,.56
3.6 mm
11 mm
TAS5162DKD
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR;
TAS5414TDKDQ1
TAS5414TDKDQ1 by Texas Instruments is a 4-channel audio amplifier with 116W output power, operating b/w -40 to 105°C. It features a small outline package style, suitable for industrial applications requiring high-quality audio amplification in automotive systems. With AEC-Q100 screening level and dual terminal position, it offers reliable performance in harsh environments.
TAS5414TDKDRQ1
TAS5414TDKDRQ1 by Texas Instruments is an AEC-Q100 compliant audio amplifier IC with 4 channels and 116W output power. Operating temperature range from -40 to 105°C, suitable for industrial applications. Features small outline package with gull wing terminals, ideal for automotive audio systems.
TAS5424TDKDQ1
TAS5424TDKDQ1 by Texas Instruments is a 4-channel audio amplifier with 116W output power, operating temperature range of -40 to 105°C. Suitable for industrial applications, it features a small outline package with gull wing terminals and AEC-Q100 screening level.
SSOP44,.55
TAS5424TDKDRQ1
TAS5424TDKDRQ1 by Texas Instruments is an audio amplifier IC with 4 channels, 116W output power, and 32dB gain. It operates in industrial temperature range (-40 to 105°C) and supports supply voltage from 8V to 22V. Suitable for automotive applications due to AEC-Q100 screening level and small package size (15.9mm x 11mm x 3.9mm).
TDA7563BPD
TDA7563BPD by STMicroelectronics is a Class AB audio amplifier featuring 4 channels and delivering 50 W output power. It operates b/w 8-18 V with a harmonic distortion of just 10%. Ideal for automotive audio systems, it ensures high-quality sound in compact designs.
CLASS AB AUDIO AMPLIFIER
30 dB
SSOP
SMALL OUTLINE, SHRINK PITCH
3.43 mm
BCDMOS
TAS5110ADADRG4
TAS5110ADADRG4 by Texas Instruments is an audio amplifier IC with 2 channels, 50W output power, and 10% harmonic distortion. It operates b/w 0-70°C, has a supply voltage range of 3-3.6V, and comes in a small outline package suitable for audio and video amplification applications.
R-PDSO-G32
32
TSSOP32,.3
3.3,22
TPA3120D2PWPR
TPA3120D2PWPR by Texas Instruments is a 24V audio amplifier IC with 20W output power and 36dB gain. It features a small outline package, dual terminals, and operates in industrial temperature range. Ideal for audio applications requiring high power efficiency and compact design.
R-PDSO-G24
7.8 mm
24
TSSOP24,.25
37 mA
30 V
4.4 mm
TSH343ID
TSH343ID by STMicroelectronics is a versatile video amplifier with a nominal bandwidth of 280 kHz, operating b/w -40 °C and 85°C. It features an 8-terminal gull-wing package and supports supply voltages from 3V to 5.5V. Ideal for audio/video applications, it ensures reliable performance in industrial settings.
280 kHz
40
TAS5261DKDRG4
TAS5261DKDRG4 by Texas Instruments is an audio amplifier IC with 315W output power, 10% harmonic distortion, and operating temperature range of 0-70°C. It has a small outline package style suitable for audio and video amplification applications requiring high power output in commercial-grade environments.
315 W
12
TAS5261DKDR
TAS5261DKDR by Texas Instruments is an audio amplifier with 315W output power, 10% harmonic distortion, and operates on a 12V power supply. It is used in commercial applications requiring high-quality audio amplification in a compact package with surface-mount capability.
TAS5261DKD
TAS5261DKD by Texas Instruments is an audio amplifier IC with 400W output power, 10% harmonic distortion, and operates b/w 0-70°C. It has a small outline package with 36 terminals for surface mount applications. Ideal for commercial-grade audio and video amplification systems.
400 W
TSH344IDT
TSH344IDT by STMicroelectronics is a versatile video amplifier designed for industrial applications, featuring a nominal bandwidth of 340 kHz and operating temperatures from -40 °C to 85°C. It comes in an 8-terminal small outline package with surface mount capability. This device operates b/w 3V and 5.5V, making it ideal for various audio and video amplification needs.
340 kHz
© 2023 All rights reserved
