Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TDA8932T/N1,112
NXP Semiconductors
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: SOP; Package Shape: RECTANGULAR;
.02 kHz
AUDIO AMPLIFIER
30 dB
R-PDSO-G32
e4
20.5 mm
1
32
85 Cel
-40 Cel
25 W
PLASTIC/EPOXY
SOP
SOP32,.4
RECTANGULAR
SMALL OUTLINE
245
+-5/+-18/10/36
Not Qualified
2.65 mm
Audio/Video Amplifiers
80 mA
36 V
10 V
YES
CMOS
INDUSTRIAL
Nickel/Palladium/Gold (Ni/Pd/Au)
GULL WING
1.27 mm
DUAL
30
7.5 mm
TDA8933T/N1,112
IT CAN ALSO OPERATE WITH 10V TO 36V SINGLE SUPPLY
36 dB
2
32 W
50 mA
18 V
5 V
NICKEL PALLADIUM GOLD
TDA8947J/N3,112
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 17; Package Code: ZIP; Package Shape: RECTANGULAR;
.022 kHz
26 dB
10 %
R-PZFM-T17
e3
4
17
8.5 W
ZIP
ZIP17,.2,.17
FLANGE MOUNT
18
145 mA
26 V
9 V
NO
MATTE TIN
THROUGH-HOLE
ZIG-ZAG
TDA8948J/N1,112
24 W
TIN
TFA9800J/N1,112
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR;
20 dB
R-PZFM-T9
9
7 W
ZIP9,.2,.11TB
260
6/18
6 V
TFA9810T/N1,112
19.7 dB
15 W
12
45 mA
20 V
8 V
TFA9841J/N1,112
7.5 W
100 mA
TFA9842BJ/N1,112
ZIP9,.2,.11
TFA9842J/N1,112
TFA9843BJ/N1,112
14 W
Tin (Sn)
TFA9843J/N1,112
Matte Tin (Sn)
TDA8594J/N1
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 27; Package Shape: RECTANGULAR; Package Style (Meter): FLANGE MOUNT;
R-PZFM-T27
27
105 Cel
75 W
BCDMOS
LA4628-E
Onsemi
LA4628-E by Onsemi is a 2-function audio amplifier IC with 14 terminals in an in-line package. It operates b/w -20 °C to 85°C, powered by a 13.5V supply. This bipolar technology device is commonly used in audio and video amplification applications.
R-PZIP-T14
e6
14
-20 Cel
ZIP14,.06,.09,70
IN-LINE
13.5
BIPOLAR
OTHER
TIN BISMUTH
1.78 mm
LA4725-E
LA4725-E by Onsemi is a 30W audio amplifier IC with 2 channels and 40dB gain. It operates b/w -35 to 85 °C, with harmonic distortion of 30%. Suitable for audio applications requiring a power supply of 9-16V.
40 dB
30 %
R-XZFM-T14
-35 Cel
30 W
UNSPECIFIED
13.2
250 mA
16 V
LV4910T-TLM-E
LV4910T-TLM-E by Onsemi is a 2W audio amplifier with 0.4% harmonic distortion. It operates b/w -20 to 75 °C and requires 2.5-5.5V supply voltage. Ideal for small outline applications in commercial extended temperature grade environments.
.4 %
R-PDSO-G30
9.75 mm
3
75 Cel
2 W
TSSOP
TSSOP30,.3
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
5
1.2 mm
5.5 V
2.5 V
BICMOS
COMMERCIAL EXTENDED
.65 mm
5.6 mm
TPA2050D4YZKT
Texas Instruments
TPA2050D4YZKT by Texas Instruments is a square-shaped audio amplifier IC with 1% harmonic distortion, operating at -40 to 85°C. It features 2 channels, 0.94W output power, and supports supply voltages from 2.5V to 5.5V. Ideal for applications requiring high-quality audio amplification in industrial settings.
1 %
S-XBGA-B25
e1
2.79 mm
25
.94 W
VFBGA
BGA25,5X5,20
SQUARE
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
1.8,3/5
.625 mm
TIN SILVER COPPER
BALL
.5 mm
BOTTOM
TAS5601DCAR
TAS5601DCAR by Texas Instruments is a 2-channel audio amplifier with 20W output power. Operating at -40 to 85°C, it supports supply voltage from 10-26V. With a compact design and low noise figure of 99dB, it's ideal for industrial audio applications.
R-PDSO-G56
14 mm
99 dB
56
20 W
HTSSOP
TSSOP56,.3,20
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
24
60 mA
6.1 mm
TPA3106D1VFPG4
TPA3106D1VFPG4 by Texas Instruments is an audio amplifier IC with 40W output power, 36dB gain, and 0.022 kHz bandwidth. It operates in industrial temperature range (-40 to 85 °C) with supply voltage of 10-26V. Ideal for audio applications requiring high power amplification in a compact flatpack package.
S-PQFP-G32
7 mm
102 dB
40 W
HLQFP
QFP32,.35SQ,32
FLATPACK, HEAT SINK/SLUG, LOW PROFILE
12/24
1.6 mm
26.5 mA
.8 mm
QUAD
NOT SPECIFIED
SSM2305CPZ-R2
Analog Devices
Analog Devices' SSM2305CPZ-R2 is a square-shaped audio amplifier IC with 8 terminals, offering 2.8W nominal output power and 18dB gain. Operating b/w -40 °C to 85°C, it has a low harmonic distortion of 10% and requires a supply voltage of 2.5V to 5.5V. Ideal for industrial applications requiring small outline, heat sink profile amplification in audio and video systems.
18 dB
S-XDSO-N8
3 mm
8
2.8 W
HVSON
SOLCC8,.11,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
.9 mm
NO LEAD
SSM2305CPZ-REEL
Analog Devices' SSM2305CPZ-REEL is a square-shaped audio amplifier IC with 10% harmonic distortion, 2.8W output power, and 18dB gain. Ideal for industrial applications requiring a small outline package with very thin profile and dual terminals. Operating temperature ranges from -40 to 85 °C, making it suitable for various audio and video amplification needs.
SSM2319CBZ-R2
Analog Devices' SSM2319CBZ-R2 is an audio amplifier IC with 3W output power, 12dB gain, and 10% harmonic distortion. It operates in industrial temperature range (-40 to 85 °C) with a supply voltage of 2.5-5.5V. Ideal for audio applications requiring high-quality amplification in compact setups due to its small form factor and surface-mount capability.
12 dB
S-PBGA-B9
1.46 mm
3 W
BGA9,3X3,20
.655 mm
SSM2319CBZ-REEL7
Analog Devices' SSM2319CBZ-REEL7 is an audio amplifier IC with 10% harmonic distortion, 3W output power, and 12dB gain. It operates b/w -40 to 85 °C, suitable for industrial applications requiring a compact grid array package with a very thin profile. The IC supports a supply voltage range of 2.5V to 5.5V for audio and video amplification in space-constrained designs.
TS4601BEIJT
STMicroelectronics
TS4601BEIJT by STMicroelectronics is a compact audio amplifier designed for industrial applications, operating b/w -40 °C to 85°C. It features a dual-channel output with supply voltages from 2.9V to 5.5V and consumes a max of 7mA. Its fine pitch grid array package ensures efficient surface mounting in space-constrained designs.
S-PBGA-B16
2.1 mm
16
FBGA
BGA16,4X4,20
GRID ARRAY, FINE PITCH
3.3/5
7 mA
2.9 V
STA515W13TR
STA515W13TR by STMicroelectronics is a versatile audio amplifier with 4 functions, operating at up to 30V. It features a compact rectangular package with 36 terminals and supports temperatures from 0 °C to 70°C. Ideal for surface mount applications in commercial audio systems.
R-PDSO-G36
36
70 Cel
0 Cel
SSOP
SSOP36,.4,20
COMMERCIAL
Matte Tin (Sn) - annealed
TAS5704PAPR
AUDIO AMPLIFIER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE;
S-PQFP-G64
10 mm
100 dB
64
HTFQFP
TQFP64,.47SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
3.3,18
3.6 V
3 V
TAS5704PAP
TAS5704PAP by Texas Instruments is a 20W audio amplifier IC with 2 channels. Operating voltage range of 3-18V, CMOS technology, and low noise figure of 100dB make it ideal for audio applications. With a compact square package style and surface-mount design, it's suitable for various audio and video amplification projects.
STA575
STA575 by STMicroelectronics is a 2-channel audio amplifier with a nominal output power of 100 W and operates b/w -24 V to +28 V. It features a harmonic distortion of 10% and can function in temperatures from 0 °C to 70°C. Ideal for high-performance audio applications, it comes in a flange mount package.
100 W
ZIP27,.16,.16,40
28,-24,+-20
28 V
1 mm
TS4871IDT
The STMicroelectronics TS4871IDT is an audio amplifier IC with 1% harmonic distortion, operating at temperatures from -40 to 85°C. It has a nominal output power of 1W and operates on supply voltages ranging from 2.5V to 5.5V. This small outline package with dual terminals is ideal for industrial applications requiring high-quality audio amplification in a compact form factor.
R-PDSO-G8
4.9 mm
1 W
SOP8,.25
2.5/5.5
1.75 mm
8 mA
3.9 mm
TS4871ID
TS4871ID by STMicroelectronics is a small outline audio amplifier with 1W nominal output power. It operates at a supply voltage range of 2.5V to 5.5V and has a low harmonic distortion of 1%. This industrial-grade amplifier is suitable for various audio and video applications.
TS4890IDT
TS4890IDT by STMicroelectronics is a compact audio amplifier with 1 W output power, operating b/w 2.2-5.5 V. It features low harmonic distortion at 1% and operates in extreme temperatures from -40 °C to 85°C. Ideal for industrial audio applications, it ensures reliable performance in various environments.
2.2/5
2.2 V
TS4890ID
TS4890ID by STMicroelectronics is a compact audio amplifier with 1 W output power and low harmonic distortion of 1%. It operates within a supply voltage range of 2.2-5.5 V, making it ideal for industrial applications. Its small outline package ensures easy surface mounting in various devices.
TS4900ID
TS4900ID by STMicroelectronics is a compact audio amplifier with a nominal output power of 0.7 W and low harmonic distortion at 1%. It operates within a supply voltage range of 2.5-5.5 V, making it ideal for industrial applications. Its small outline package ensures efficient surface mounting in various devices.
.7 W
2.6/5
TS482ID
TS482ID by STMicroelectronics is a dual-channel audio amplifier designed for industrial applications, operating b/w -40 °C and 85 °C. It features a nominal output power of 0.107 W and supports supply voltages from 2V to 5.5V. Its compact SO package ensures efficient surface mounting in space-constrained designs.
.107 W
2/5.5
7.2 mA
2 V
TS4902IDT
TS4902IDT by STMicroelectronics is a compact audio amplifier with a nominal output power of 0.7 W and operates within a supply voltage range of 2.2-5.5 V. It features low harmonic distortion at 1% and supports industrial applications with an operating temp from -40 °C to 85 °C. Its small outline design makes it ideal for space-constrained audio devices.
TS4902ID
TS4902ID by STMicroelectronics is a compact audio amplifier with a nominal output power of 0.7 W and operates within a supply voltage range of 2.2-5.5 V. It features low harmonic distortion at 1% and supports industrial applications with an operating temp from -40 °C to 85 °C. Its small outline design makes it ideal for space-constrained environments.
TS4902IST
TS4902IST by STMicroelectronics is a compact audio amplifier with a nominal output power of 0.7 W and operates within a supply voltage range of 2.2-5.5 V. It features low harmonic distortion at 1% and supports industrial applications with an operating temp from -40 °C to 85 °C. Its small outline design makes it ideal for space-constrained environments.
S-PDSO-G8
TSSOP8,.19
1.1 mm
TAS5100ADAP
TAS5100ADAP by Texas Instruments is a 30W audio amplifier IC with 2 channels. Operating voltage ranges from 3V to 22V, suitable for commercial-grade applications. It comes in a small outline package with dual terminals and can operate b/w 0°C to 70°C temperature range.
IT ALSO REQUIRES 0 TO 27V SUPPLY FOR H-BRIDGE
11 mm
TSSOP32,.3
3.3,22
6.2 mm
TAS5100AIDAP
TAS5100AIDAP by Texas Instruments is an audio amplifier IC with 2 channels and a nominal output power of 30W. It operates in industrial temperature range (-40 to 85°C) with supply voltage from 3V to 3.6V. The package style is small outline, suitable for audio and video amplification applications.
MAX4368EBL-T
Maxim Integrated
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 8; Package Code: VFBGA; Package Shape: SQUARE;
S-PBGA-B8
e0
1.52 mm
.33 W
.67 mm
4.3 mA
2.3 V
TIN LEAD
MAX4368EUA
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
4 mA
TPA751GQSR
TPA751GQSR by Texas Instruments is a square-shaped audio amplifier IC with 24 terminals, operating b/w -40 to 85°C. It offers 0.5% harmonic distortion, 0.35W output power at 3.3/5V supplies, and a bandwidth of 0.02 kHz. Ideal for industrial applications requiring compact audio amplification in surface-mount setups.
DEVICE FEATURES SHUTDOWN MODE FOR POWER SENSITIVE APPLICATIONS
.5 %
S-PBGA-B24
.35 W
BGA
BGA24,5X5,20
GRID ARRAY
2.5 mA
TDA7563
TDA7563 by STMicroelectronics is a versatile 4-channel audio amplifier with a nominal output power of 46 W and harmonic distortion at 10%. It operates b/w 8-18 V, making it ideal for automotive audio systems. Its BCDMOS technology ensures efficient performance in compact designs.
46 W
14.4
300 mA
STA550
STA550 by STMicroelectronics is a 2-channel audio amplifier with a nominal output power of 70 W and operates within a supply voltage range of ±3/±17 V to 20/30 V. It features low harmonic distortion at 10% and supports temperatures from 0 °C to 70 °C. Ideal for high-quality audio applications, its compact design fits various setups.
R-PZIP-T27
29.23 mm
70 W
SZIP
IN-LINE, SHRINK PITCH
+-3/+-17,-10/-22,20/30
19.37 mm
30 V
4.5 mm
TAS5110DAD
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: HTSSOP; Package Shape: RECTANGULAR;
IT ALSO REQUIRES 16.5V TO 26.5V SUPPLY
50 W
TAS5110DAP
TAS5110DAP by Texas Instruments is an audio amplifier IC with 2 channels and 50W output power. It operates b/w 0-70°C, with harmonic distortion of 10%. Suitable for audio applications, it has a small outline package style and supports surface mount installation.
TAS5101DAPR
TAS5101DAPR by Texas Instruments is a 15W audio amplifier IC with 2 channels. Operating voltage range of 3-22V, suitable for commercial temperature grade applications. Features small outline package style, surface mount design, and dual terminal position for easy integration in audio and video systems.
.635 mm
TAS5101DAP
TAS5101DAP by Texas Instruments is a 15W audio amplifier IC with 2 channels. Operating voltage ranges from 3V to 3.6V, suitable for commercial temperature grades. It comes in a small outline package ideal for surface mount applications in audio and video systems.
TAS5101IDAPR
TAS5101IDAPR by Texas Instruments is a 32-terminal audio amplifier with 15W output power. Operating b/w -40 to 85°C, it supports dual channels and requires a supply voltage of 3-3.6V. Ideal for industrial applications, this rectangular-shaped IC is surface-mountable and made of plastic/epoxy.
© 2023 All rights reserved
