Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RFLPF2012100Y0T by Walsin Technology is a low pass filter with a cutoff frequency of 500 MHz and max insertion loss of 0.7 dB. It has 4 terminals, measures 1.25mm in width, and is suitable for general purpose electronic filtering applications.
Median Price
$0.175
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip Stock
Vyrian
Netroflash
AZTECH Wire
$0.830
$0.800
$0.780
$0.770
Kepictronics
Having 4 terminals allows for easy connection and installation in different electronic circuits.
The low pass filter type ensures that only signals below the cutoff frequency of 500 MHz are passed through, providing effective signal filtering.
The compact width of 1.25mm makes this filter suitable for applications where space is limited.
The low insertion loss of 0.7 dB ensures minimal signal loss during the filtering process.
The 500 MHz cutoff frequency allows this filter to effectively block signals above this frequency, making it ideal for specific frequency applications.
With a VSWR of 2, this filter ensures efficient power transfer and minimal signal reflection, improving overall performance.
The 50 ohm input impedance matches standard signal requirements, ensuring compatibility with a wide range of electronic devices.
The short length of 2mm contributes to the overall compact design of the filter, making it suitable for use in small electronic devices.
Having the same output impedance as input impedance ensures impedance matching, which is essential for optimal signal transmission.
The surface mount design simplifies the installation process and allows for easy integration into electronic circuit boards.
The low height of 0.9mm contributes to the overall slim profile of the filter, making it suitable for applications where space is limited.
General Purpose Electronic Filters RFLPF2012100Y0T attributes and parameters. Explore more General Purpose Electronic Filters devices from Walsin Technology
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
No. of Terminals:
Output Impedance (ohm):
Voltage Standing Wave Ratio:
Width (mm):
Incorporated in 1992, Walsin Technology Corporation is the world’s leading manufacturer of passive components with a one-stop-shop product portfolio and worldwide delivery platform. The company’s product lineup includes multiple-layer ceramic chip (MLCC) capacitor/array, chip-resistor/array & networks, inductors, RF filters, disc capacitor, varistor, chip fuse, and antenna, etc.In less than ten years, Walsin Technology grew rapidly into a publicly traded company in Taiwan and ranked as a top tier supplier for passive components. Its dedication in R&D and strategic alliances with business partners contribute to this remarkable achievement. Recognizing the importance of technical capability, Walsin Technology is committed strongly to R&D. The company has been spending approximately 3% of its sales in R&D since 2001. To ensure its product specs are in line with customers’ expectations, Walsin Technology constantly benchmarks its product development roadmap against the industry and focuses on developing miniaturized, cost-effective, environmentally friendly, protective, and specialty components. Walsin Technology has been continuously growing its business through alliances. Synergy with powder maker PDC, with specialty product producer Kamaya, and with regional distributors enables Walsin Technology to extend its product offerings and services. Ten production centers strategically located in Asia, Walsin Technology manufactures high-quality products and delivers to customers via its distribution network established worldwide. Walsin’s superior product quality and top-notch services have earned Walsin Technology world-renowned brand names to manufacture for their needs. From smartphones, networking devices, data centers, PCs, LED light bulbs, white goods, industrial equipment to automotive parts, Walsin Technology’s products can be found virtually in all electronic devices around you.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
American Power Devices
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Nexperia
Laube Technology
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LP0FA0600A7TR\250
American Technical Ceramics
LOW PASS FILTER;
LP0DA1890A700
KYOCERA AVX
LP0DA1890A700 by KYOCERA AVX is a LOW PASS FILTER with 16 terminals, operating b/w -55 to 85 °C. It has a Center Frequency of 1890 MHz, VSWR of 1.62, and input impedance of 50 OHM. Ideal for applications requiring filtering at high frequencies in compact electronic devices.
ACPF-7005
Broadcom
BAND PASS FILTER; Minimum Operating Temperature: -10 Cel; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel; Length: 2 mm; Maximum Insertion Loss: 3.5 dB;
HMC1000LP5ETR
Analog Devices
HMC1000LP5ETR by Analog Devices is a 32-terminal BAND REJECT FILTER with a Center Frequency of 7900 MHz and Input Impedance of 50Ω. It operates b/w -40°C to 85°C, suitable for applications requiring high-frequency rejection in compact electronic systems.
S3HP156LC
Coilcraft
Coilcraft's S3HP156LC is a 15 MHz high pass filter with 0.3 dB max insertion loss. It operates b/w -40 to 85 °C and has 50 OHM impedance. Ideal for surface mount applications in electronic devices requiring precise signal filtering.
EMIF01-1008AF4
DEA203500BT-2213A1-H
TDK
DEA203500BT-2213A1-H by TDK is a 6-terminal BAND PASS FILTER with Center Frequency of 3500 MHz, Insertion Loss of 1.1 dB, and Input Impedance of 50 OHM. Ideal for electronic applications requiring precise signal filtering in the temperature range from -40 to 90 °C.
DEA252450BT-2031A1
TDK's DEA252450BT-2031A1 is a 4-terminal BAND PASS FILTER with attenuation of 20dB at 2100MHz and 23dB at 5000MHz. Operating b/w -40°C to 85°C, it has a max insertion loss of 1.5dB. Ideal for applications requiring precise filtering in compact electronic devices.
LFB182G45SG9A272
Murata Manufacturing
BAND PASS FILTER; Maximum Insertion Loss: 2.1 dB; Packing Method: TAPE AND REEL; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 2450 MHz; Additional Features: INSERTION LOSS CONSIDERED WITH RESPECT TO TEMPERATURE RANGE -40 TO +85;
ACPF-8440-BLK
BAND PASS FILTER;
HMC890LP5E
Analog Devices' HMC890LP5E is a 32-terminal BAND PASS FILTER with a center frequency of 1500 MHz and 50 OHM impedance. Operating b/w -40 to 85 °C, it's ideal for electronic applications requiring precise signal filtering in compact spaces. With matte tin finish and surface mounting type, it offers reliable performance at 0.01 W power input.
ACPF-8041-TR1
BAND PASS FILTER; Width (mm): 1.4; Average Input Power: 1.995 W; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM;
MLPF-WB55-01E3
STMicroelectronics' MLPF-WB55-01E3 is a LOW PASS FILTER with 6 terminals, operating from -40 to 105 °C. It has a Center Frequency of 2450 MHz, Insertion Loss of 1.1 dB, and Impedance of 50 OHM. Ideal for general purpose electronic filtering applications in surface mount configurations.
DEA202450BT-1294C1-H
DEA202450BT-1294C1-H by TDK is a 4-terminal BAND PASS FILTER with 2448 MHz Center Frequency, 1.35 dB Max Insertion Loss, and -40 to 85°C Operating Temp Range. Ideal for electronic applications requiring precise filtering in compact spaces.
HMC899
Analog Devices' HMC899 is a BAND PASS FILTER with a Center Frequency of 28.5 MHz, ideal for General Purpose Electronic Filters. With dimensions of L2.5XB1.2XH0.1 (mm), it operates b/w -55 to 85 °C, making it suitable for various electronic applications requiring precise frequency filtering in compact spaces.
BP0EA4649A7TR
BP0CA1100A700
BP0CA1100A700 by KYOCERA AVX is a 23-terminal BAND PASS FILTER with a center frequency of 1100 MHz and max insertion loss of 5 dB. Operating b/w -55°C to 85°C, it has gold terminal finish and is ideal for electronic applications requiring a compact surface mount filter with an impedance of 50 OHM.
HMC892LP5E
Analog Devices' HMC892LP5E is a 32-terminal BAND PASS FILTER with 8 dB Max Insertion Loss and 4000 MHz Center Frequency. Ideal for applications requiring a compact, surface-mountable filter with an operating temperature range of -40 to 85°C.
ACPF-7025-TR1
BAND PASS FILTER; Width (mm): 2.55; Maximum No. of Sections: 1; Maximum Operating Temperature: 100 Cel; Length: 2.55 mm; Impedance (Input): 50 OHM;
HMC897
Analog Devices' HMC897 is a 14000 MHz Band Pass Filter with 50 OHM input/output impedance. Operating b/w -55 to 85 °C, it handles up to 0.0316 W power. Ideal for electronic applications requiring precise signal filtering and amplification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RFLPF2012090K0T
Walsin Technology
LOW PASS FILTER; Width (mm): 1.25; Impedance (Input): 50 OHM; Maximum No. of Sections: 1; Length: 2 mm; Mounting Type: SURFACE MOUNT;
RFLPF2012110A0T
LOW PASS FILTER; Mounting Type: SURFACE MOUNT; Width (mm): 1.25; Minimum No. of Sections: 1; Height: 1.05 mm; Length: 2 mm;
RFLPF20121G8D1T
LOW PASS FILTER; Maximum No. of Sections: 1; Width (mm): 1.2; Height: .9 mm; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved