Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOW PASS FILTER; Maximum No. of Sections: 1; Width (mm): 1.2; Height: .9 mm; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Assy Fe
1+ parts
100+ parts
1k+ parts
10k+ parts
Authorized Procurement Solutions
Kepictronics
ChipstoGo Electronic ltd
General Purpose Electronic Filters RFLPF20121G8D1T attributes and parameters. Explore more General Purpose Electronic Filters devices from Walsin Technology
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
No. of Terminals:
Output Impedance (ohm):
Voltage Standing Wave Ratio:
Width (mm):
Incorporated in 1992, Walsin Technology Corporation is the world’s leading manufacturer of passive components with a one-stop-shop product portfolio and worldwide delivery platform. The company’s product lineup includes multiple-layer ceramic chip (MLCC) capacitor/array, chip-resistor/array & networks, inductors, RF filters, disc capacitor, varistor, chip fuse, and antenna, etc.In less than ten years, Walsin Technology grew rapidly into a publicly traded company in Taiwan and ranked as a top tier supplier for passive components. Its dedication in R&D and strategic alliances with business partners contribute to this remarkable achievement. Recognizing the importance of technical capability, Walsin Technology is committed strongly to R&D. The company has been spending approximately 3% of its sales in R&D since 2001. To ensure its product specs are in line with customers’ expectations, Walsin Technology constantly benchmarks its product development roadmap against the industry and focuses on developing miniaturized, cost-effective, environmentally friendly, protective, and specialty components. Walsin Technology has been continuously growing its business through alliances. Synergy with powder maker PDC, with specialty product producer Kamaya, and with regional distributors enables Walsin Technology to extend its product offerings and services. Ten production centers strategically located in Asia, Walsin Technology manufactures high-quality products and delivers to customers via its distribution network established worldwide. Walsin’s superior product quality and top-notch services have earned Walsin Technology world-renowned brand names to manufacture for their needs. From smartphones, networking devices, data centers, PCs, LED light bulbs, white goods, industrial equipment to automotive parts, Walsin Technology’s products can be found virtually in all electronic devices around you.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Bytesonic Electronics
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
LM358AN
Philips Semiconductors
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
ACPF-7424-BLK
Broadcom
BAND PASS FILTER; Minimum No. of Sections: 1; Packing Method: TAPE; Output Impedance (ohm): 50 OHM; Maximum No. of Sections: 1; Average Input Power: .501 W;
HMC881LP5ETR
Analog Devices' HMC881LP5ETR is a 32-terminal low pass filter with a center frequency of 2200 MHz and max insertion loss of 3.8 dB. Operating b/w -40°C to 85°C, it's ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
SP000388241
BAND PASS FILTER; Mounting Type: SURFACE MOUNT; Height: .6 mm; Attenuation At Maximum Frequency: 48 dB; Length: 2 mm; Output Impedance (ohm): 50 OHM;
HMC1000LP5E
Analog Devices' HMC1000LP5E is a 32-terminal BAND REJECT FILTER with 7900 MHz Center Frequency, 50 OHM Impedance, and -40 to 85 °C Operating Temperature. Ideal for electronic applications requiring precise signal filtering in compact spaces.
DEA202450BT-1213C1
DEA202450BT-1213C1 by TDK is a BAND PASS FILTER with 4 terminals, operating from -40 to 85 °C. It has a Center Frequency of 2450 MHz, Insertion Loss of 1.5 dB, and compact dimensions (L2.0XB1.25XH0.95 mm). Ideal for electronic applications requiring precise frequency filtering in limited space.
LTC6603IUF#TRPBF
LTC6603IUF#TRPBF by Analog Devices is a 24-terminal low pass filter with dimensions of L4.0xB4.0xH0.75 (mm). It operates b/w -40 to 85 °C and has matte tin terminal finish. Ideal for general purpose electronic filtering in surface mount applications.
ACPF-7025-TR1
BAND PASS FILTER; Width (mm): 2.55; Maximum No. of Sections: 1; Maximum Operating Temperature: 100 Cel; Length: 2.55 mm; Impedance (Input): 50 OHM;
MLPF-WB-01D3
STMicroelectronics
General Purpose Filters;
SP000435408
BAND PASS FILTER; Width (mm): 1.6; Center/Cutoff Frequency (fo/fc): 1575.42 MHz; Impedance (Input): 50 OHM; Height: .6 mm; Output Impedance (ohm): 50 OHM;
LTC6603CUF#TRPBF
LTC6603CUF#TRPBF by Analog Devices is a 24-terminal low pass filter with dimensions of L4.0xB4.0xH0.75 mm, suitable for surface mount applications. It operates b/w 0-70 °C and has matte tin terminal finish, making it ideal for general purpose electronic filtering tasks in various electronic devices.
IP4337CX18/LF,135
Nexperia
LOW PASS FILTER; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 20; Minimum No. of Sections: 1; Center/Cutoff Frequency (fo/fc): 1900 MHz;
DEA162450BT-2096A1-H
TDK's DEA162450BT-2096A1-H is a 2450 MHz BAND PASS FILTER with 50 OHM impedance. It has a max insertion loss of 2.8 dB and operates b/w -40 to 85 °C. Ideal for surface mount applications in electronic devices requiring precise frequency filtering.
ACPF-7024
BAND PASS FILTER; No. of Terminals: 3; Length: 2 mm; Maximum Insertion Loss: 3.5 dB; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel;
LTC6602IUF#PBF
LTC6602IUF#PBF by Analog Devices is a 24-terminal BAND PASS FILTER with operating temperatures from -40 to 85°C. With dimensions of L4.0xB4.0xH0.75 mm, it's ideal for surface mount applications in general purpose electronic filters.
LP0BA1390A700
American Technical Ceramics
LOW PASS FILTER; Center/Cutoff Frequency (fo/fc): 1390 MHz; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Average Input Power: 4 W;
ADMV8818SCCZ-EP
Analog Devices' ADMV8818SCCZ-EP is a 56-terminal high pass filter with a cutoff frequency of 10 GHz, ideal for applications requiring a 50 Ohm input/output impedance. With a wide operating temperature range (-55 to 105°C) and compact dimensions (9.15mm x 9.15mm x 1.03mm), it's suitable for surface mount installations in various electronic systems.
HMC896LP4E
Analog Devices' HMC896LP4E is a 24-terminal BAND PASS FILTER with a Center Frequency of 14 GHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for RF applications requiring precise frequency filtering in compact designs.
4177
Api Technologies
4177 by Api Technologies is a BAND PASS FILTER with a width of 25.4mm and max insertion loss of 6 dB. It has a center/cutoff frequency of 30 MHz and is commonly used in general purpose electronic filters applications.
ACFF-1025-BLK
BAND PASS FILTER; Minimum Operating Temperature: -40 Cel; Maximum No. of Sections: 1; Output Impedance (ohm): 50 OHM; Packing Method: BAG; TAPE; Length: 2.55 mm;
HMC897
Analog Devices' HMC897 is a 14000 MHz Band Pass Filter with 50 OHM input/output impedance. Operating b/w -55 to 85 °C, it handles up to 0.0316 W power. Ideal for electronic applications requiring precise signal filtering and amplification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Walsin Technology
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved