Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BAND PASS FILTER; Minimum No. of Sections: 1; Packing Method: TAPE; Output Impedance (ohm): 50 OHM; Maximum No. of Sections: 1; Average Input Power: .501 W;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Decca Corp
$11.000
$10.780
$10.672
Native Components
$23.590
Northwest PG Solutions
$25.949
$23.354
Supply Digital
Corphita
General Purpose Electronic Filters ACPF-7424-BLK attributes and parameters. Explore more General Purpose Electronic Filters devices from Broadcom
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Width (mm):
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Silicon Standard
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
RHP-92+
Mini-circuits
RHP-92+ by Mini-circuits is an 8-terminal high pass filter with a center frequency of 92 MHz and attenuation of 20 dB at 65 MHz. It operates b/w -40 to 85°C, has a VSWR of 1.2, and can handle up to 0.5 W input power. Ideal for general purpose electronic filtering applications requiring a surface mount solution.
ACPF-8040-BLK
Broadcom
BAND PASS FILTER; Height: .95 mm; Length: 2.1 mm; No. of Terminals: 3; Center/Cutoff Frequency (fo/fc): 2390 MHz; Packing Method: BAG; TAPE;
LP0805H3500ASTR
American Technical Ceramics
LOW PASS FILTER; Average Input Power: 8 W; Center/Cutoff Frequency (fo/fc): 3500 MHz; Output Impedance (ohm): 50 OHM; Length: 2.03 mm; Maximum Operating Temperature: 100 Cel;
ADMV8526
Analog Devices
BAND PASS FILTER;
LTC6602IUF#PBF
LTC6602IUF#PBF by Analog Devices is a 24-terminal BAND PASS FILTER with operating temperatures from -40 to 85°C. With dimensions of L4.0xB4.0xH0.75 mm, it's ideal for surface mount applications in general purpose electronic filters.
1400BP41A0550E-AEC
Johanson Technology
BP0805A4320ASTR
KYOCERA AVX
The KYOCERA AVX BP0805A4320ASTR is a 4-terminal BAND PASS FILTER with a center frequency of 4320 MHz and max insertion loss of 1.2 dB. Operating b/w -40°C to 85°C, it has an impedance of 50Ω and can handle up to 5W average input power. Ideal for surface mount applications in general purpose electronic filters.
HMC890LP5E
Analog Devices' HMC890LP5E is a 32-terminal BAND PASS FILTER with a center frequency of 1500 MHz and 50 OHM impedance. Operating b/w -40 to 85 °C, it's ideal for electronic applications requiring precise signal filtering in compact spaces. With matte tin finish and surface mounting type, it offers reliable performance at 0.01 W power input.
LFL152G45TC1A219
Murata Manufacturing
Murata Manufacturing's LFL152G45TC1A219 is a LOW PASS FILTER with 0.5mm width, 1mm length, and 0.4mm height. It offers max insertion loss of 0.45 dB at 2450 MHz cutoff frequency. Ideal for surface mount applications in general purpose electronic filters.
DEA202450BT-1213C1
TDK
DEA202450BT-1213C1 by TDK is a BAND PASS FILTER with 4 terminals, operating from -40 to 85 °C. It has a Center Frequency of 2450 MHz, Insertion Loss of 1.5 dB, and compact dimensions (L2.0XB1.25XH0.95 mm). Ideal for electronic applications requiring precise frequency filtering in limited space.
HMC1044LP3ETR
Analog Devices' HMC1044LP3ETR is a 16-terminal low pass filter with 50 Ohm input/output impedance, operating from -40 to 85 °C. It features matte tin finish, surface mounting type, and dimensions of L3.1xB3.1xH1.0 mm. Ideal for general purpose electronic filtering applications in various industries.
ACPF-7424-TR1
BAND PASS FILTER; Average Input Power: .501 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -30 Cel; Width (mm): 1.18; Dimensions: L1.48XB1.18XH0.695 (mm)/L0.058XB0.046XH0.027 (inch);
ACPF-8040-TR1
BAND PASS FILTER; Length: 2.1 mm; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; No. of Terminals: 3; Average Input Power: 1 W; Height: .95 mm;
BP0EA4649A700
HMC897
Analog Devices' HMC897 is a 14000 MHz Band Pass Filter with 50 OHM input/output impedance. Operating b/w -55 to 85 °C, it handles up to 0.0316 W power. Ideal for electronic applications requiring precise signal filtering and amplification.
ACFF-1025-TR1
BAND PASS FILTER; Height: 1.1 mm; Width (mm): 2.55; Maximum No. of Sections: 1; Maximum Insertion Loss: 4 dB; Maximum Operating Temperature: 100 Cel;
ACPF-8040
BAND PASS FILTER; Height: .9 mm; Maximum Insertion Loss: 4.5 dB; Impedance (Input): 50 OHM; Length: 2 mm; Mounting Type: SURFACE MOUNT;
S3HP156LC
Coilcraft
Coilcraft's S3HP156LC is a 15 MHz high pass filter with 0.3 dB max insertion loss. It operates b/w -40 to 85 °C and has 50 OHM impedance. Ideal for surface mount applications in electronic devices requiring precise signal filtering.
LP0805A1747ASTR
KYOCERA AVX LP0805A1747ASTR is a LOW PASS FILTER with 4 terminals. It offers 30 dB attenuation at min frequency of 3495 MHz and 20 dB at max frequency of 5242.5 MHz. Ideal for applications requiring impedance of 50 OHM, such as RF communication systems.
BPF-C141+
The Mini-circuits BPF-C141+ is a 14-terminal band pass filter with a center frequency of 141 MHz and max insertion loss of 2 dB. Operating b/w -40 to 85°C, it has an impedance of 50Ω and VSWR of 1.7, making it ideal for general purpose electronic filtering in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACPF-7A24-TR2
BAND PASS FILTER; Height: .235 mm; Maximum Operating Temperature: 85 Cel; Average Input Power: .501 W; Minimum No. of Sections: 1; Maximum No. of Sections: 1;
ACPF-7124-BLK
ACPF-7005-TR1
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Center/Cutoff Frequency (fo/fc): 1882.5 MHz; Maximum Insertion Loss: 3.5 dB; Average Input Power: 1 W; Minimum Operating Temperature: -10 Cel;
ACPF-7A24-BLK
BAND PASS FILTER; Width (mm): 0.585; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Minimum No. of Sections: 1; Maximum Operating Temperature: 85 Cel; Packing Method: TAPE;
ACPF-7141-BLK
BAND PASS FILTER; No. of Terminals: 3; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Maximum Operating Temperature: 85 Cel; Length: 2 mm; Width (mm): 1.6;
ACPF-7025-BLK
BAND PASS FILTER; Output Impedance (ohm): 50 OHM; Length: 2.55 mm; Minimum No. of Sections: 1; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT;
ACPF-7002-TR1
BAND PASS FILTER; Width (mm): 1.6; Dimensions: L2.0XB1.6XH1.0 (mm)/L0.079XB0.063XH0.039 (inch); Maximum Insertion Loss: 3.7 dB; Packing Method: TAPE AND REEL; Output Impedance (ohm): 50 OHM;
ACPF-7124-TR1
BAND PASS FILTER; Width (mm): 1.18; Minimum Operating Temperature: -30 Cel; No. of Terminals: 5; Output Impedance (ohm): 50 OHM; Center/Cutoff Frequency (fo/fc): 2441.5 MHz;
ACPF-7024
BAND PASS FILTER; No. of Terminals: 3; Length: 2 mm; Maximum Insertion Loss: 3.5 dB; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel;
ACPF-7141-TR1
BAND PASS FILTER; No. of Terminals: 3; Packing Method: TR, 7 INCH; Minimum Operating Temperature: -30 Cel; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT;
ACPF-7024-TR1
BAND PASS FILTER; Length: 2 mm; Width (mm): 1.6; No. of Terminals: 3; Terminal Finish: Gold (Au); Maximum Operating Temperature: 85 Cel;
ACPF-7A24-TR1
BAND PASS FILTER; Width (mm): 0.585; Packing Method: TR, 7 INCH; No. of Terminals: 4; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Mounting Type: SURFACE MOUNT;
ACPF-7005-BLK
BAND PASS FILTER; Length: 2 mm; Width (mm): 1.6; Maximum Operating Temperature: 85 Cel; No. of Terminals: 3; Impedance (Input): 50 OHM;
ACPF-7025-TR1
BAND PASS FILTER; Width (mm): 2.55; Maximum No. of Sections: 1; Maximum Operating Temperature: 100 Cel; Length: 2.55 mm; Impedance (Input): 50 OHM;
ACPF-7002-BLK
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 1.6; Height: 1 mm; Manufacturer Series: ACPF-7002;
ACPF-7005
BAND PASS FILTER; Minimum Operating Temperature: -10 Cel; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel; Length: 2 mm; Maximum Insertion Loss: 3.5 dB;
ACPF-7024-BLK
BAND PASS FILTER; Width (mm): 1.6; Packing Method: TAPE; Dimensions: L2.0XB1.6XH0.95 (mm)/L0.079XB0.063XH0.037 (inch); JESD-609 Code: e4; Minimum Operating Temperature: -30 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved