Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LP0DA1890A700 by KYOCERA AVX is a LOW PASS FILTER with 16 terminals, operating b/w -55 to 85 °C. It has a Center Frequency of 1890 MHz, VSWR of 1.62, and input impedance of 50 OHM. Ideal for applications requiring filtering at high frequencies in compact electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Ampacity Inc.
$1.400
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Having 16 terminals allows for versatile connections and integration with other components or systems.
Low pass filters are effective in removing higher frequency noise or signals, making this product suitable for applications where such filtering is required.
The high maximum operating temperature ensures reliable performance even in environments with elevated temperatures.
The low minimum operating temperature allows for operation in cold or extreme conditions without impacting performance.
The compact width enables space-saving installation and integration into tight spaces or smaller electronic devices.
The specific cutoff frequency of 1890 MHz ensures effective filtering of signals above this frequency, making it ideal for applications requiring such a cutoff point.
A lower VSWR value indicates better impedance matching and signal transmission efficiency, ensuring optimal performance in signal filtering applications.
The 50 ohm input impedance is standard for many RF and electronic systems, allowing for seamless integration without impedance mismatches.
The moderate length provides a good balance between compact size and effective filtering capabilities.
Matching the output impedance to the standard 50 ohm ensures minimal signal loss and distortion during transmission.
With an average input power of 4W, this filter can handle moderate power levels without compromising performance.
Surface mounting type allows for easy and secure installation on circuit boards, saving space and enabling automated assembly processes.
Ceramic package material offers excellent thermal and mechanical properties, ensuring durability and stability during operation.
The low height makes this filter suitable for applications with height constraints or where a slim profile is required.
General Purpose Electronic Filters LP0DA1890A700 attributes and parameters. Explore more General Purpose Electronic Filters devices from KYOCERA AVX
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Voltage Standing Wave Ratio:
Width (mm):
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Telefunken Microelectronics
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Jiangsu Changjiang Electronics Technology
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
DEA162450BT-2096A1-H
TDK
TDK's DEA162450BT-2096A1-H is a 2450 MHz BAND PASS FILTER with 50 OHM impedance. It has a max insertion loss of 2.8 dB and operates b/w -40 to 85 °C. Ideal for surface mount applications in electronic devices requiring precise frequency filtering.
ADMV8818SCCZ-EP-P7
Analog Devices
Analog Devices' ADMV8818SCCZ-EP-P7 is a 56-terminal high pass filter with a cutoff frequency of 10 GHz. Operating b/w -55°C to 105°C, it has an input/output impedance of 50Ω. Ideal for surface mount applications in electronic systems requiring precise signal filtering at high frequencies.
BPF900A
L-com
BAND PASS FILTER; Center/Cutoff Frequency (fo/fc): 900 MHz; Minimum No. of Sections: 1; Maximum No. of Sections: 1; Connector (Input): N FEMALE; Length: 74 mm;
ACPF-7124-BLK
Broadcom
BAND PASS FILTER;
DEA202450BT-1213C1
DEA202450BT-1213C1 by TDK is a BAND PASS FILTER with 4 terminals, operating from -40 to 85 °C. It has a Center Frequency of 2450 MHz, Insertion Loss of 1.5 dB, and compact dimensions (L2.0XB1.25XH0.95 mm). Ideal for electronic applications requiring precise frequency filtering in limited space.
LP2816A0512SNTR
American Technical Ceramics
DATA LINE FILTER; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
ACPF-8040-BLK
BAND PASS FILTER; Height: .95 mm; Length: 2.1 mm; No. of Terminals: 3; Center/Cutoff Frequency (fo/fc): 2390 MHz; Packing Method: BAG; TAPE;
ADMV8913
Analog Devices' ADMV8913 is a 30-terminal high pass filter with 5 dB max insertion loss, 9.5 MHz cutoff frequency, and 50 Ohm input/output impedance. Ideal for general purpose electronic filtering applications, it operates b/w -55 °C to 105°C in surface mount configurations.
LTC6602IUF#PBF
LTC6602IUF#PBF by Analog Devices is a 24-terminal BAND PASS FILTER with operating temperatures from -40 to 85°C. With dimensions of L4.0xB4.0xH0.75 mm, it's ideal for surface mount applications in general purpose electronic filters.
HMC892LP5E
Analog Devices' HMC892LP5E is a 32-terminal BAND PASS FILTER with 8 dB Max Insertion Loss and 4000 MHz Center Frequency. Ideal for applications requiring a compact, surface-mountable filter with an operating temperature range of -40 to 85°C.
XHF-23+
Mini-circuits
XHF-23+ by Mini-circuits is a 12-terminal high pass filter with a center frequency of 1650 MHz and max insertion loss of 2 dB. Operating b/w -55°C to 105°C, it has an impedance of 50 ohms and can handle up to 2W input power. Ideal for general purpose electronic filtering applications requiring precise signal control in compact spaces.
MMCB2528G5T-0001A3
TDK's MMCB2528G5T-0001A3 is a BAND PASS FILTER with 2.3 dB Max Insertion Loss, 28500 MHz Center Frequency, and 1 W Average Input Power. Ideal for applications requiring high-frequency filtering in electronic circuits.
LP0BA1390A700
KYOCERA AVX
LP0BA1390A700 by KYOCERA AVX is a LOW PASS FILTER with 16 terminals, operating from -55 to 85 °C. It has a Center Frequency of 1390 MHz, VSWR of 1.21, and input impedance of 50 OHM. Ideal for applications requiring a compact surface mount filter with a power rating of 4 W in the frequency range up to 1390 MHz.
ACPF-7005
BAND PASS FILTER; Minimum Operating Temperature: -10 Cel; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel; Length: 2 mm; Maximum Insertion Loss: 3.5 dB;
HMC898LP4E
Analog Devices' HMC898LP4E is a 24-terminal BAND PASS FILTER with a center frequency of 16500 MHz and input impedance of 50Ω. Operating b/w -40°C to 85°C, it handles up to 0.0079W power. Ideal for electronic applications requiring precise filtering in compact spaces due to its small dimensions (L4.1xB4.1xH1.0 mm).
HMC897
Analog Devices' HMC897 is a 14000 MHz Band Pass Filter with 50 OHM input/output impedance. Operating b/w -55 to 85 °C, it handles up to 0.0316 W power. Ideal for electronic applications requiring precise signal filtering and amplification.
HMC881LP5ETR
Analog Devices' HMC881LP5ETR is a 32-terminal low pass filter with a center frequency of 2200 MHz and max insertion loss of 3.8 dB. Operating b/w -40°C to 85°C, it's ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
ACPF-8440-TR1
ACPF-7424-TR1
BAND PASS FILTER; Average Input Power: .501 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -30 Cel; Width (mm): 1.18; Dimensions: L1.48XB1.18XH0.695 (mm)/L0.058XB0.046XH0.027 (inch);
IP4337CX18/LF,135
Nexperia
LOW PASS FILTER; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 20; Minimum No. of Sections: 1; Center/Cutoff Frequency (fo/fc): 1900 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP0DA1890A700
LOW PASS FILTER; Impedance (Input): 50 OHM; No. of Terminals: 16; Voltage Standing Wave Ratio: 1.62; Maximum Operating Temperature: 85 Cel; Height: .559 mm;
LP0DA1780A700
LOW PASS FILTER; Length: 10.198 mm; Output Impedance (ohm): 50 OHM; Voltage Standing Wave Ratio: 1.31; Package Material: CERAMIC; Impedance (Input): 50 OHM;
LP0DA1800A700
LOW PASS FILTER; Voltage Standing Wave Ratio: 1.42; Average Input Power: 4 W; Maximum Operating Temperature: 85 Cel; Height: .559 mm; Minimum Operating Temperature: -55 Cel;
LP0DA1810A700
LOW PASS FILTER; Maximum Operating Temperature: 85 Cel; Length: 10.198 mm; Average Input Power: 4 W; Package Material: CERAMIC; Output Impedance (ohm): 50 OHM;
LP0DA1840A700
LOW PASS FILTER; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel; Length: 10.198 mm; Height: .559 mm;
LP0DA1880A700
LOW PASS FILTER; Maximum Operating Temperature: 85 Cel; Center/Cutoff Frequency (fo/fc): 1880 MHz; Output Impedance (ohm): 50 OHM; Average Input Power: 4 W; Minimum Operating Temperature: -55 Cel;
LP0DA1950A700
LOW PASS FILTER; No. of Terminals: 16; Minimum Operating Temperature: -55 Cel; Length: 10.198 mm; Maximum Operating Temperature: 85 Cel; Package Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved