Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOW PASS FILTER; Mounting Type: SURFACE MOUNT; Width (mm): 1.25; Minimum No. of Sections: 1; Height: 1.05 mm; Length: 2 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Velocity Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Cyclops Electronics Ltd
Speed Components Ltd
Metaverse IC Inc.
Authorized Procurement Solutions
Kepictronics
General Purpose Electronic Filters RFLPF2012110A0T attributes and parameters. Explore more General Purpose Electronic Filters devices from Walsin Technology
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
No. of Terminals:
Output Impedance (ohm):
Voltage Standing Wave Ratio:
Width (mm):
Incorporated in 1992, Walsin Technology Corporation is the world’s leading manufacturer of passive components with a one-stop-shop product portfolio and worldwide delivery platform. The company’s product lineup includes multiple-layer ceramic chip (MLCC) capacitor/array, chip-resistor/array & networks, inductors, RF filters, disc capacitor, varistor, chip fuse, and antenna, etc.In less than ten years, Walsin Technology grew rapidly into a publicly traded company in Taiwan and ranked as a top tier supplier for passive components. Its dedication in R&D and strategic alliances with business partners contribute to this remarkable achievement. Recognizing the importance of technical capability, Walsin Technology is committed strongly to R&D. The company has been spending approximately 3% of its sales in R&D since 2001. To ensure its product specs are in line with customers’ expectations, Walsin Technology constantly benchmarks its product development roadmap against the industry and focuses on developing miniaturized, cost-effective, environmentally friendly, protective, and specialty components. Walsin Technology has been continuously growing its business through alliances. Synergy with powder maker PDC, with specialty product producer Kamaya, and with regional distributors enables Walsin Technology to extend its product offerings and services. Ten production centers strategically located in Asia, Walsin Technology manufactures high-quality products and delivers to customers via its distribution network established worldwide. Walsin’s superior product quality and top-notch services have earned Walsin Technology world-renowned brand names to manufacture for their needs. From smartphones, networking devices, data centers, PCs, LED light bulbs, white goods, industrial equipment to automotive parts, Walsin Technology’s products can be found virtually in all electronic devices around you.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LM358N
Silicon Group
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Lite-on Semiconductor
ACPF-7002-BLK
Broadcom
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 1.6; Height: 1 mm; Manufacturer Series: ACPF-7002;
BPF900A
Infinite Electronics International
BPF900A by Infinite Electronics International is a 900 MHz Band Pass Filter with N FEMALE connectors. Measuring 74mm in width, it is designed for PANEL MOUNT installation. Ideal for applications requiring precise frequency filtering in electronic systems.
HMC1000LP5E
Analog Devices
Analog Devices' HMC1000LP5E is a 32-terminal BAND REJECT FILTER with 7900 MHz Center Frequency, 50 OHM Impedance, and -40 to 85 °C Operating Temperature. Ideal for electronic applications requiring precise signal filtering in compact spaces.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
LTC6603CUF#PBF
LTC6603CUF#PBF by Analog Devices is a 24-terminal LOW PASS FILTER with dimensions of L4.0XB4.0XH0.75 (mm). It operates b/w 0-70°C, has matte tin finish, and is surface mountable. Ideal for general purpose electronic filtering applications requiring compact size and efficient signal processing.
ACPF-7024-TR1
BAND PASS FILTER; Length: 2 mm; Width (mm): 1.6; No. of Terminals: 3; Terminal Finish: Gold (Au); Maximum Operating Temperature: 85 Cel;
DEA203500BT-2213A1-H
TDK
DEA203500BT-2213A1-H by TDK is a 6-terminal BAND PASS FILTER with Center Frequency of 3500 MHz, Insertion Loss of 1.1 dB, and Input Impedance of 50 OHM. Ideal for electronic applications requiring precise signal filtering in the temperature range from -40 to 90 °C.
ACPF-8040
BAND PASS FILTER; Height: .9 mm; Maximum Insertion Loss: 4.5 dB; Impedance (Input): 50 OHM; Length: 2 mm; Mounting Type: SURFACE MOUNT;
HMC881LP5E
Analog Devices' HMC881LP5E is a 32-terminal low pass filter with a center frequency of 2200 MHz and max insertion loss of 3.8 dB. Operating b/w -40°C to 85°C, it has an input impedance of 50Ω and output impedance of 50Ω, making it ideal for general purpose electronic filtering applications in surface mount setups.
LTC6603IUF#PBF
LTC6603IUF#PBF by Analog Devices is a 24-terminal low pass filter with dimensions of L4.0xB4.0xH0.75 (mm). It operates b/w -40 to 85 °C, making it suitable for various general purpose electronic filtering applications in surface mount configurations.
BP0FA1190A7TR\250
KYOCERA AVX
BP0FA1190A7TR\250 by KYOCERA AVX is a BAND PASS FILTER with 31 terminals. It has a center frequency of 1190 MHz and max insertion loss of 5 dB. This filter is used in general purpose electronic applications requiring a narrow frequency range.
HMC899
Analog Devices' HMC899 is a BAND PASS FILTER with a Center Frequency of 28.5 MHz, ideal for General Purpose Electronic Filters. With dimensions of L2.5XB1.2XH0.1 (mm), it operates b/w -55 to 85 °C, making it suitable for various electronic applications requiring precise frequency filtering in compact spaces.
EMIF01-1008AF4
STMicroelectronics
LOW PASS FILTER;
LTC1069-6CS8#PBF
LTC1069-6CS8#PBF by Analog Devices is an 8-terminal LOW PASS FILTER with a max frequency of 0.02 MHz. Operating temp range: 0-70 °C, surface mount package, ideal for general purpose electronic filtering applications.
MBC2-0915-025SA
Api Technologies
MBC2-0915-025SA by Api Technologies is a BAND PASS FILTER with 23 dB attenuation at 837.5 MHz. Operating b/w -30 to 85 °C, it has a max insertion loss of 2.6 dB and impedance of 50 OHM. Ideal for electronic applications requiring precise frequency filtering in compact spaces.
HMC896LP4ETR
Analog Devices' HMC896LP4ETR is a 24-terminal BAND PASS FILTER with a Center Frequency of 14 GHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for RF applications requiring precise filtering in compact designs.
DEA166200BT-2356A3
DEA166200BT-2356A3 by TDK is a 3-terminal BAND PASS FILTER with 6200 MHz Center Frequency, 2.1 dB Max Insertion Loss, and -40 to 90 °C Operating Temp. Ideal for electronic applications requiring high-frequency filtering in compact spaces.
BPF-A75+
Mini-circuits
The Mini-circuits BPF-A75+ is a 14-terminal bandpass filter with a center frequency of 75 MHz. It offers attenuation up to 40 dB at 95 MHz and has a max insertion loss of 6 dB. Ideal for applications requiring precise signal filtering in electronic circuits.
ACPF-8440-TR1
BAND PASS FILTER;
ADMV8913SCCZ-EP
HIGH PASS FILTER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Walsin Technology
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved