Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LFB182G45BG2D280 is a Band Pass Filter with 1.95 dB Max Insertion Loss, 2450 MHz Center Frequency, and 50 OHM Input Impedance. Ideal for electronic applications requiring filtering at temperatures ranging from -40 to 85 °C, this surface mount filter offers a compact size of L1.6XB0.8XH0.65 mm.
Median Price
$0.180
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.290
100+ parts
$0.141
1k+ parts
$0.070
10k+ parts
$0.069
TTI Europe
-
DigiKey
Chip Stock
Sensible Micro Corp
EMSNET
Speed Components Ltd
Cogito LLC
Nova Conductors
Benley Electronics
$0.750
Corohmni
$2.482
iodParts Technologies Inc.
Perfect Parts
Kepictronics
RC Electronics
$0.840
$0.790
$0.780
Alle Elektronik GmbH
Argo Parts USA
Netroflash
Authorized Procurement Solutions
Band pass filter ensures that only the desired frequency range is allowed to pass through, making it ideal for applications where specific frequency bands need to be isolated or amplified.
With a maximum operating temperature of 85°C, this filter can withstand high temperatures without compromising its performance, making it suitable for a wide range of operating environments.
The filter's ability to operate at temperatures as low as -40°C ensures reliability and functionality even in extremely cold conditions, increasing its versatility for various applications.
The compact width of 0.8mm allows for efficient use of space, making this filter suitable for applications where size constraints are a concern.
The low insertion loss of 1.95 dB ensures minimal signal degradation when passing through the filter, making it ideal for applications where signal integrity is critical.
The center/cutoff frequency of 2450 MHz indicates the specific frequency range that the filter is designed to pass, making it ideal for applications that require filtering within this frequency range.
A low voltage standing wave ratio of 2.4 indicates efficient power transfer and minimal signal reflection, ensuring optimal performance in high-frequency applications.
With an input impedance of 50 ohms, this filter is compatible with standard RF systems and ensures seamless integration into existing setups.
The short length of 1.6mm allows for a compact design, making this filter suitable for applications where space-saving is essential.
Matching the input impedance, the output impedance of 50 ohms ensures impedance matching and optimal signal transfer within the system.
The average input power of 0.5W indicates the maximum power that can be safely inputted into the filter without causing damage, ensuring reliable operation within specified power limits.
The surface mounting type allows for easy and secure installation on circuit boards, making it convenient for mass production and integration into electronic devices.
The compact dimensions of 1.6mm length, 0.8mm width, and 0.65mm height make this filter suitable for applications where space is limited, offering flexibility in design and installation.
The low height of 0.65mm allows for a slim profile, making this filter ideal for applications where height restrictions are a concern.
General Purpose Electronic Filters LFB182G45BG2D280 attributes and parameters. Explore more General Purpose Electronic Filters devices from Murata Manufacturing
Additional Features:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Voltage Standing Wave Ratio:
Width (mm):
PCN Packaging - Multiple Devices Packaging Labeling 01/Aug/2020
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Micropac Industries
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Instrument
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Sensitron Semiconductor
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
Surge Components
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ACPF-7025-BLK
Broadcom
BAND PASS FILTER; Output Impedance (ohm): 50 OHM; Length: 2.55 mm; Minimum No. of Sections: 1; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT;
ADMV8420
Analog Devices
Analog Devices' ADMV8420 is a 24-terminal BAND PASS FILTER with a Center Frequency of 15 GHz. Operating b/w -40 °C to 85°C, it has an Input Impedance of 50Ω and Output Impedance of 50Ω. Ideal for General Purpose Electronic Filters in applications requiring high-frequency signal processing.
ADMV8913
Analog Devices' ADMV8913 is a 30-terminal high pass filter with 5 dB max insertion loss, 9.5 MHz cutoff frequency, and 50 Ohm input/output impedance. Ideal for general purpose electronic filtering applications, it operates b/w -55 °C to 105°C in surface mount configurations.
LTC6602CUF#PBF
LTC6602CUF#PBF by Analog Devices is a 24-terminal BAND PASS FILTER with operating temp range of 0-70 °C. It has matte tin finish, dimensions of L4.0xB4.0xH0.75 mm, and is surface mountable. Ideal for general purpose electronic filtering applications due to its compact size and temperature range suitability.
LTC1069-6IS8#TRPBF
LTC1069-6IS8#TRPBF by Analog Devices is an 8-terminal LOW PASS FILTER with a max frequency of 0.02 MHz. Operating temp range: -40 to 85 °C. Ideal for general purpose electronic filtering in surface mount applications.
BP0CA1100A700
KYOCERA AVX
BP0CA1100A700 by KYOCERA AVX is a 23-terminal BAND PASS FILTER with a center frequency of 1100 MHz and max insertion loss of 5 dB. Operating b/w -55°C to 85°C, it has gold terminal finish and is ideal for electronic applications requiring a compact surface mount filter with an impedance of 50 OHM.
ACPF-7002-BLK
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 1.6; Height: 1 mm; Manufacturer Series: ACPF-7002;
BP0EA4649A7TR
BAND PASS FILTER;
MLPF-WB-01E3
STMicroelectronics
MLPF-WB-01E3 by STMicroelectronics is a low pass filter ideal for RF applications, featuring a 2450 MHz cutoff frequency and 1.1 dB max insertion loss. It operates b/w -40 °C to 105 °C with a compact size of 1.025 mm x 1.625 mm x 0.425 mm. This surface mount device ensures optimal performance in demanding environments.
HMC1000LP5E
Analog Devices' HMC1000LP5E is a 32-terminal BAND REJECT FILTER with 7900 MHz Center Frequency, 50 OHM Impedance, and -40 to 85 °C Operating Temperature. Ideal for electronic applications requiring precise signal filtering in compact spaces.
ACPF-7A24-TR2
BAND PASS FILTER; Height: .235 mm; Maximum Operating Temperature: 85 Cel; Average Input Power: .501 W; Minimum No. of Sections: 1; Maximum No. of Sections: 1;
IP5311CX5/LF/P
LOW PASS FILTER; Center/Cutoff Frequency (fo/fc): 3005 MHz; Height: .65 mm; Minimum Operating Temperature: -35 Cel; Mounting Type: SURFACE MOUNT; Package Material: PLASTIC;
ACPF-8240-BLK
LTC1069-6IS8#PBF
LTC1069-6IS8#PBF by Analog Devices is an 8-terminal low pass filter with a max frequency of 0.02 MHz. Operating temperature ranges from -40°C to 85°C, making it suitable for various applications in general purpose electronic filters. This surface mount device has dimensions of 3.9mm x 4.9mm x 1.752mm and features matte tin terminal finish for optimal performance.
DEA160960LT-5044C1
TDK
DEA160960LT-5044C1 by TDK is a LOW PASS FILTER with 6 terminals, operating from -40 to 85 °C. It has a Center Frequency of 829.5 MHz, Insertion Loss of 0.9 dB, and Input/Output Impedance of 50 OHM. Ideal for surface mount applications in electronic devices requiring high-frequency filtering.
1400BP41A0550E-AEC
Johanson Technology
BP0FA1100A700
BP0FA1100A700 by KYOCERA AVX is a 31-terminal BAND PASS FILTER with 1100 MHz Center Frequency, 5 dB Max Insertion Loss, and 50 OHM Impedance. Ideal for electronic applications requiring filtering at temperatures ranging from -55 to 85 °C, it comes in a ceramic package for surface mounting using waffle pack method.
HMC890LP5ETR
Analog Devices' HMC890LP5ETR is a 32-terminal BAND PASS FILTER with a center frequency of 1500 MHz and input impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for RF applications requiring precise filtering in compact spaces.
ACPF-8420-BLK
MLPF-WB-02D3
MLPF-WB-02D3 by STMicroelectronics is a low pass filter ideal for RF applications, featuring a 2450 MHz cutoff frequency and 1.2 dB max insertion loss. It operates b/w -40 °C to 105 °C with a compact size of 1.05 mm x 1.65 mm x 0.68 mm. This surface mount device ensures optimal performance in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFB182G45SG9A272
Murata Manufacturing
BAND PASS FILTER; Maximum Insertion Loss: 2.1 dB; Packing Method: TAPE AND REEL; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 2450 MHz; Additional Features: INSERTION LOSS CONSIDERED WITH RESPECT TO TEMPERATURE RANGE -40 TO +85;
LFB182G45SG9E181TEMP
BAND PASS FILTER; Output Impedance (ohm): 50 OHM; Maximum No. of Sections: 1; Length: 1.6 mm; No. of Terminals: 4; Minimum No. of Sections: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved