Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Sprague's ULN-2801A is an 8-function peripheral driver with built-in transient protection. It operates b/w -20°C to 85°C, featuring open-collector output characteristics and a turn-on/off time of 1 us. Ideal for applications requiring sink current flow direction, this rectangular package style IC is commonly used in buffer or inverter-based interfaces.
Median Price
$3.710
Lifecycle Status
Suppliers In-Stock
46
In-Stock Inventory
1k+
Arrow
1+ parts
$1.276
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$2.020
Chip1Stop
$2.670
$1.120
$0.997
Farnell
$2.040
$1.620
Newark
$4.880
$2.320
$2.230
Mouser Electronics
$5.530
$2.560
$1.930
$1.800
DigiKey
$6.720
$3.264
$2.561
$2.517
Element14
$7.060
$3.370
$3.340
Avnet
Verical
EBV Elektronik
RS (Exports)
$1.504
Freelance Electronics
$0.210
Digiode
$0.779
TEDSS.com
$1.000
Nova Conductors
$1.485
Ace Electronics
$2.000
Bristol Electronics
$2.340
$1.451
$0.772
TME
$4.610
$2.520
$1.830
Forefront Electronics and Design
$9.800
Lakeland Logistics Inc
Vyrian
Anansix
Component Sense
ComSIT Distribution GmbH
ComSIT USA
Inventory MP
ECAB
LIBRA Elektronik GmbH
Atlantic Semiconductor
Connector Distribution Corp
Right Parts Inc.
Electronic Expediters
Prism Electronics
PC Components Company LLC
ACDS - Activité Composants Distribution Service
Goldney Electronics S.L.
Zilex Electronics Inc.
R&J Components
Quantum Digital Technology
Digital Electronic Gebert Verwaltungs UG
Standard Data Resources
Holdelec - ElecDif-Pro
Fibra_Brandt Electronic GMBH
LittleDiode
Q Components
Semicontronic
$0.700
$0.682
$0.679
Ampacity Inc.
Corphita
$0.738
Advanced Electronics
$1.303
$1.186
$1.068
Corohmni
$1.435
Continental Prestige Electronics
$1.455
Argo Parts USA
Netroflash
IDEA Electronic Components Group
$1.746
$1.572
MKK Technologies
$3.284
DigiPath Technology Company
Aztec Data Supply Inc.
$10.195
RC Electronics
$1.560
$1.470
$1.440
Perfect Parts
Microchip USA
Lixinc
Alle Elektronik GmbH
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
A-Z Elektronik GmbH
Parana Technologies
$2.088
Kepictronics
Authorized Procurement Solutions
Assy Fe
Speed Components Ltd (Excess)
Cyclops Electronics Ltd (Excess)
A-Plus Industry Inc.
GreenTree Electronics
The use of plastic/epoxy material provides durability and resistance to harsh environments, making this peripheral driver reliable for long-term use.
With a high maximum operating temperature, this peripheral driver can withstand heat stress and operate effectively in a variety of conditions.
The open-collector output allows for easy interfacing with external circuitry, making this peripheral driver versatile and compatible with different systems.
Having 8 bits in the driver provides sufficient capacity for handling complex peripheral control tasks, making this product suitable for applications that require multiple functions.
Peripheral Drivers ULN-2801A attributes and parameters. Explore more Peripheral Drivers devices from Vishay Sprague
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
ULN-2801A Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Vishay Sprague is well known for having invented the first tantalum capacitors and the first surface-mount tantalum chip capacitors. Vishay Sprague continues this commitment to innovation today through the ongoing development of higher performance tantalum capacitors in a wide range of sizes. Vishay Sprague has the broadest range of tantalum capacitors offered by any manufacturer with devices that also include conformal coated and molded surface-mount styles, as well as both radial and axial through-hole products, covering a wide range of automotive, consumer, industrial, and telecommunications as well as very high-performance applications. Vishay acquired its tantalum capacitor division from Sprague in 1992, which was founded in 1926 by Robert Sprague, founder of the “tone control” capacitor. Vishay subsequently reinforced its position in the marketplace by acquiring tantalum operations from a number of other brands
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Microsemi
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
NCV8405ASTT1G
NCV8405ASTT1G by Onsemi is a small outline peripheral driver with AEC-Q100 screening for automotive applications. It features built-in protections against transient, over current, and over voltage conditions. With a nominal output peak current limit of 10.5A and sink flow direction, it is ideal for buffer or inverter based interface ICs.
XLMG1210RVRT
XLMG1210RVRT by Texas Instruments is a peripheral driver with max supply voltage of 5.25V, thermal protection, and 19 terminals. Ideal for automotive applications, it has a turn-on time of 0.018us and operates b/w -40 to 125 °C.
BTM7710GXUMA1
Infineon Technologies
Infineon's BTM7710GXUMA1 is a 28-terminal peripheral driver with a peak current limit of 15A. It features Gull Wing terminals, source and sink output current flow, and is designed for buffer or inverter-based interface IC applications. The small outline rectangular package is made of plastic/epoxy and supports surface mount technology.
ULN2004ANSRG4
ULN2004ANSRG4 by Texas Instruments is a 7-bit buffer/inverter-based peripheral driver with open-collector output. It operates b/w -20°C to 70°C, has a max supply voltage of 8V, and built-in transient protection. Ideal for applications requiring sink current flow direction in compact designs due to its small outline package style.
MIC2981/82YWM
MIC2981/82YWM by Microchip Technology is an 8-function peripheral driver with a max supply voltage of 50V. It features built-in transient protections and operates in industrial temperature grades. This small outline package driver has a turn-on time of 2us and turn-off time of 10us, making it ideal for various applications requiring source current flow direction.
UDN-2981A
Vishay Intertechnology
Vishay Intertechnology's UDN-2981A is an 8-function peripheral driver with built-in transient protection. Featuring 18 terminals in an in-line package, it operates b/w -20°C to 85°C. Ideal for applications requiring a buffer or inverter-based interface IC with fast turn-on/off times of 2us and 10us respectively.
MIC2026-1YM
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VND600SPTR-E
VND600SPTR-E by STMicroelectronics is a 2-function peripheral driver with built-in protections. It operates b/w -40 to 150 °C, with a supply voltage range of 5.5-36 V. Ideal for automotive applications due to its small outline and source current flow direction.
PTPS22919QDCKRQ1
PTPS22919QDCKRQ1 by Texas Instruments is a peripheral driver with 6 terminals, offering built-in protections for transient, over current, and thermal issues. It operates b/w -40 to 125 °C with a supply voltage range of 1.6V to 5.5V, making it ideal for automotive applications requiring a max output current of 1.5A.
BSP762T
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE;
BSP752RXT
BSP752RXT by Infineon Technologies is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections against various faults. It operates at supply voltages ranging from 6V to 52V and has a nominal output peak current limit of 1.7A. Ideal for applications requiring buffer or inverter based peripheral drivers in compact designs.
TPS22964CYZPR
TPS22964CYZPR by Texas Instruments is a 6-terminal peripheral driver with built-in transient protection. It features a very thin profile, fine pitch grid array package style and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring sink output current flow direction.
ITS4140NHUMA1
ITS4140NHUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, operating voltage range of 4.9V to 60V, and built-in protections against transient, over current, and over voltage. It has a small outline package style suitable for commercial extended temperature grade applications requiring sink output current flow direction.
BSP742T
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
L6201PS
L6201PS by STMicroelectronics is a full bridge peripheral driver with 5A output current limit, suitable for applications requiring source and sink flow direction. It operates at supply voltages ranging from 12V to 48V, featuring built-in thermal protection. The small outline package with gull wing terminals makes it ideal for compact designs in various electronic systems.
BSP78
BSP78 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12V nominal voltage with a peak output current limit of 24A. This rectangular package style IC is ideal for automotive applications requiring fast turn-on/off times and sink output current flow direction.
HCPL-316J
Agilent Technologies
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
VN920SPTR-E
STMicroelectronics' VN920SPTR-E is a peripheral driver with 36V max supply voltage, 30A max output current, and built-in protections. Ideal for applications requiring transient, over current, over voltage protection. Package style: small outline, heat sink/slug; interface IC type: buffer or inverter based peripheral driver.
BSP75GTA
Diodes Incorporated
BSP75GTA by Diodes Inc. is a Peripheral Driver with 4 terminals, 32V max supply voltage, and built-in protections against over current, over voltage, and thermal issues. It has a turn-on time of 10us and nominal output peak current limit of 3A. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces.
SZNUD3112LT1G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Youtai Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
ULN2003ADR2G
ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.
Rochester Electronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;
ULN2803AN
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
Motorola
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Taejin Technology
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: .5 A; No. of Functions: 1;
ULN2003D1013TR
STMicroelectronics ULN2003D1013TR is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring fast turn-on/off times in a small outline package.
ULN2803CDWR
ULN2803CDWR by Texas Instruments is an 8-function peripheral driver with open-collector output characteristics. It has built-in transient protections and a nominal output peak current limit of 0.5A, making it ideal for applications requiring sink current flow direction such as motor control systems.
ULN-2003A
ULN-2003A by Sprague Electric is a 7-bit bipolar peripheral driver with a max output current of 0.35 A and nominal voltage of 50 V. It features a rectangular plastic/epoxy package, dual terminal position, and operates in temperatures ranging from 0 to 70°C. Ideal for driving various loads in commercial applications.
ULN2003A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;
Allegro MicroSystems
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -20 Cel;
Sgs-ates Componenti Electronici S P A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved