Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's MFU0603FF03000P100 fuse offers a rated current of 3A and very fast blow characteristic. With dimensions of 1.55mm x 0.85mm x 0.45mm, it is ideal for circuit protection in applications requiring a max operating temperature of 35°C and rated DC voltage of 32V.
Median Price
$0.218
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$0.230
100+ parts
$0.119
1k+ parts
-
10k+ parts
Mouser Electronics
$0.280
$0.193
$0.140
$0.122
DigiKey
$0.310
$0.181
$0.150
Newark
$0.355
$0.185
Farnell
$0.131
$0.116
Element14
$0.207
$0.197
Verical
Chip1Stop
$0.143
Vyrian
$0.036
Bristol Electronics
Atlantic Semiconductor
Prism Electronics
Nova Conductors
Ampacity Inc.
$0.031
Advanced Electronics
$5.338
$4.858
$4.377
Corohmni
$21.499
Eastek
$0.037
GreenTree Electronics
Authorized Procurement Solutions
Continental Prestige Electronics
$0.182
Perfect Parts
Netroflash
Provides good protection against power surges and electrical faults.
Easy to handle and store for efficient production line use.
Compact size for space-saving installation.
Suitable for various applications due to standard width.
Ensures secure connection and stability in the circuit.
Specific dimensions for precise fitting and performance.
Low profile design for tight spaces and compact devices.
Adequate current rating for standard electrical needs.
Can withstand high temperatures for reliable operation.
Quickly interrupts the circuit to prevent damage during power surges.
Suitable for use in various environmental conditions.
Essential component for protecting electronic devices from overcurrent conditions.
Corrosion-resistant finish for long-term reliability.
Can safely interrupt high fault currents without damage.
Suitable for low voltage applications to ensure safety.
Easy to install on PCBs for efficient circuit design.
Complies with industry standards for quality and safety.
Fuses MFU0603FF03000P100 attributes and parameters. Explore more Fuses devices from Vishay Intertechnology
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
MFU0603FF03000P100 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Nexperia
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NXP Semiconductors
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
General Semiconductor
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LP-CC-6
Eaton Corporation
LP-CC-6 by Eaton Corp is a 6A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Ideal for inline mounting, it meets CE, CSA, and UL standards for circuit protection applications.
FNQ-R-4-1/2
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4.5 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
BK/AGC-10-R
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Manufacturer Series: AGC;
TCF60RN
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: TAB/BLADE;
FNQ-R-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.125 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
NON-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 40 A; Terminal Shape: END CAP;
ANL-250
ANL-250 by Eaton Corp is a 250A time delay electric fuse with 2700A breaking capacity. Measuring 81mm x 22.2mm, it features an end cap terminal shape and inline mounting for circuit protection in applications requiring up to 80V DC voltage. CSA and UL standards compliant with built-in indicator feature.
LPJ-10SP
Eaton Corporation's LPJ-10SP fuse, rated at 10A and 600V AC/DC, features a J class with time delay blow characteristic. With dimensions of 20.6mm x 57.2mm, it offers circuit protection with a high breaking capacity of 300kA. Ideal for inline mounting applications, it complies with CE, CSA, and UL standards.
LPJ-400SP
Eaton LPJ-400SP fuse, rated 400A at 600V AC/DC, features J class with time delay blow characteristic. Suitable for electric circuit protection in various applications. Compact size of 53.6mm x 38.3mm with TAB/BLADE terminals and high breaking capacity of 300kA.
LPJ-150SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE;
02170.04MXP
Littelfuse
Littelfuse 02170.04MXP fuse, rated at 0.04A and 250V, offers fast blow characteristic with trip time of 0.003s. Measuring 5x20mm, it provides circuit protection in applications requiring a rated breaking capacity of 35A at temperatures ranging from -55 to 125°C.
0452005MRL
0452005MRL by Littelfuse is a NANO fuse with 125V voltage rating and 5A current. With time lag blow characteristic, it offers circuit protection in various applications. Featuring trip delay of 14400s, it is ideal for use in electronics requiring reliable overcurrent protection.
LP-CC-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
0453003.MR
Littelfuse 0453003.MR fuse, rated at 125V and 3A, offers very fast blow characteristic with a trip time of 5s. Nano-sized with dimensions of 6.1mm x 2.69mm x 2.69mm, it is ideal for circuit protection in applications requiring surface mounting method and wraparound terminal shape.
36916300440
Littelfuse 36916300440 fuse has a rated current of 6.3A and nominal joule integral of 160.74J, suitable for electric fuse circuit protection at 300V AC/DC. With a time lag blow characteristic and trip time of 20s, it is ideal for applications requiring reliable overcurrent protection in various industries.
FNQ-R-15
FNQ-R-15 by Eaton Corporation is a 15A time delay fuse with a rated AC voltage of 600V. It has a compact body size of 10.3mm x 38.1mm and is suitable for circuit protection in applications such as inline/holder mounting in electrical systems.
DFJ-175
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 450 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE;
028707.5PXCN
028707.5PXCN by Littelfuse is a 7.5A electric fuse with a trip time of 0.08s and a rated breaking capacity of 1000A. It is commonly used for circuit protection in applications such as inline holders, with a temperature range of -40 to 125°C.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
0297015.H
Littelfuse 0297015.H is a MINI fuse with 15A rated current, 32V DC voltage, and 308J nominal joule integral. It has a trip time of 0.03s and is ideal for circuit protection in automotive applications due to its compact size and high breaking capacity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MFU0805FF00800P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Reference Standard: UL; UMF;
MFU0603FF01000P100
Vishay Intertechnology's MFU0603FF01000P100 fuse offers a rated current of 1A and very fast blow characteristic. With dimensions of 1.55mm x 0.85mm x 0.45mm, it is ideal for electric circuit protection in applications requiring a max operating temperature of 125°C. This surface mount fuse has a rated breaking capacity of 50A and is UL and UMF compliant.
MFU0603FF02000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Packing Method: TAPE AND REEL;
MFU0805FF00500P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
MFU0805FF04000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND; Body Width: 1.25 inch;
MFU0805FF03500P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.5 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
MFU0402FF02000E100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: 15 Cel;
MFU0402FF01000E100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
MFU0603FF03000P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 1.55 mm;
MFU0603FF00630P100
MFU0603FF00630P100 by Vishay Intertechnology is a surface mount electric fuse with a rated current of 0.63 A and a max operating temperature of 35°C. It has a very fast blow characteristic and is commonly used for circuit protection in various applications.
MFU0603FF01600P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -55 Cel;
MFU0603FF03000PW00
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
MFU0603FF03150P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Maximum Operating Temperature: 35 Cel;
MFU0603FF03150P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
MFU0603FF03150PW00
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: 15 Cel;
MFU0603FF03500P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.5 A; Terminal Shape: WRAPAROUND; Blow Characteristic: VERY FAST;
MFU0603FF03500P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.5 A; Terminal Shape: WRAPAROUND; Nominal Joule Integral: .0308 J;
MFU0603FF03500PW00
MFU0603FF04000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
MFU0603FF03000P1AT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Rated Voltage: 50 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved