Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's MFU0603FF01000P100 fuse offers a rated current of 1A and very fast blow characteristic. With dimensions of 1.55mm x 0.85mm x 0.45mm, it is ideal for electric circuit protection in applications requiring a max operating temperature of 125°C. This surface mount fuse has a rated breaking capacity of 50A and is UL and UMF compliant.
Median Price
$0.183
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$0.131
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.280
$0.199
$0.151
$0.126
Element14
$0.318
$0.245
$0.204
DigiKey
$0.340
$0.198
$0.165
Newark
$0.220
$0.172
$0.147
Verical
$0.125
Avnet
$0.123
$0.115
Farnell
$0.152
Chip1Stop
$0.106
Vyrian
LIBRA Elektronik GmbH
Nova Conductors
Martec Srl
Sensible Micro Corp
Ampacity Inc.
$0.090
Corohmni
$8.367
Aztec Data Supply Inc.
$14.410
Perfect Parts
Argo Parts USA
Continental Prestige Electronics
$0.156
Aranea Global
This fuse has a low joule integral, making it ideal for protecting electronic devices with sensitive components.
The tape and reel packaging method allows for easy automated assembly, saving time and reducing manual handling errors.
With a compact body size, this fuse is suitable for applications where space is limited.
The slim body width of this fuse makes it easy to incorporate into densely packed circuit boards.
The wraparound terminal shape provides a secure connection and helps prevent the fuse from becoming dislodged during operation.
The small dimensions of this fuse make it versatile for a range of electronic devices.
The low body height allows for the fuse to be mounted flush to the PCB, saving space in the overall design.
With a rated current of 1A, this fuse is suitable for protecting low current circuits in various applications.
The high maximum operating temperature ensures the fuse can withstand harsh environmental conditions.
The very fast blow characteristic provides quick protection in the event of a fault, minimizing damage to the circuit.
The low minimum operating temperature allows the fuse to function reliably in cold environments.
This electric fuse provides effective circuit protection against overcurrent conditions.
The tin over nickel terminal finish offers enhanced durability and corrosion resistance for reliable performance.
With a high rated breaking capacity, this fuse can safely interrupt high fault currents without damage.
The 32V rated DC voltage makes this fuse suitable for low voltage circuit protection applications.
The surface mounting feature allows for easy installation on PCBs without the need for additional hardware.
This fuse meets UL and UMF standards, ensuring compliance with industry regulations for safety and quality.
Fuses MFU0603FF01000P100 attributes and parameters. Explore more Fuses devices from Vishay Intertechnology
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
MFU0603FF01000P100 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
Onsemi
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ATQR1
Mersen S A
The Mersen S A ATQR1 fuse is rated for 600V AC with a 1A current and time delay blow characteristic. It has a body length of 10.4mm, diameter of 38.1mm, and end cap terminal shape. Suitable for inline mounting applications, it offers circuit protection with a high breaking capacity of 200kA at up to 80°C temperature.
FWP-150A
Eaton Corporation
The Eaton Corporation FWP-150A fuse offers 2900J nominal joule integral, 700V AC/DC rated voltage, and 150A current rating. It is an electric fuse with a high breaking capacity of 50000A, suitable for inline mounting applications in various industries. Compliant with CE, CSA, and UL standards, it ensures reliable circuit protection.
LP-CC-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
FWX-40A
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE;
KTK-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
JLLS050.TXP
Littelfuse
Littelfuse JLLS050.TXP fuse, rated 50A/600V, with fast blow characteristic. Ideal for electric circuit protection in applications requiring high breaking capacity of 200kA. Features end cap terminal shape and inline mounting method, meeting CE, CSA, and UL standards.
ATDR1-4/10
ATDR1-4/10 by Mersen S A is a 1.4A time delay electric fuse with 600V AC and 300V DC ratings. It features an end cap terminal shape, inline mounting, and a compact size of 10.4mm x 38.1mm. Ideal for circuit protection in various applications meeting CSA and UL standards.
BK-AGC-10-R
The Eaton BK-AGC-10-R fuse, rated at 10A and 250V, with dimensions of 6.3x32mm, is a fast blow electric fuse suitable for circuit protection in various applications. It has a nominal joule integral of 486J and a rated breaking capacity of 200A, meeting CSA and UL standards. The fuse operates b/w -55°C to 125°C temperature range with pre-arcing rating of 0.492 A2/s.
LPJ-200SPI
Eaton Corporation LPJ-200SPI fuse, rated 200A/600V, J class with time delay blow characteristic. Inline/holder mounting for circuit protection in applications requiring 300kA breaking capacity. Features indicator and meets CE, CSA, UL standards.
FWS-10A20FI
Eaton Corporation's FWS-10A20FI fuse offers 118J nominal joule integral, 1400V AC voltage rating, and 50000A rated breaking capacity. Ideal for circuit protection in applications requiring a 10A current rating with built-in indicator feature. Measuring at 20.5mm x 127mm, it is designed for inline/holder mounting method.
ERBRE2R00V
Panasonic
The Panasonic ERBRE2R00V is a 0603 size fuse with a rated current of 2A and a max operating temperature of 125°C. It is designed for circuit protection in applications requiring fast blow characteristics, such as surface mount electronics.
TCF70
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
LP-CC-10
LP-CC-10 by Eaton Corp is a 10A time delay electric fuse with 600V AC & 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Commonly used in inline/holder setups for circuit protection in various applications.
KTK-R-15
The Eaton Corporation's KTK-R-15 fuse, rated at 15A and 600V, features fast blow characteristic with a rated breaking capacity of 200kA. This CC class fuse with nickel terminal finish is designed for electric circuit protection in applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, it comes in a box packing method and measures 10.3mm x 38.1mm in dimensions.
ANN-80
Eaton Corporation's ANN-80 fuse, rated at 80A and 125V AC/80V DC, features very fast blow characteristic with a breaking capacity of 2500A. With TAB/BLADE terminals and dimensions of 81mm x 22.2mm, it is ideal for electric circuit protection in various applications requiring surface mount installation and built-in indicator feature.
AJT60N
AJT60N fuse by Mersen S A is a 60A, time delay electric fuse with 600V AC and 400V DC ratings. With a body length of 27mm and height of 60mm, it features an end cap terminal shape. Ideal for inline mounting applications, it has a high breaking capacity of 200kA and complies with CSA, IEC, and UL standards.
FNQ-R-2-8/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.8 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
0251001.MXL
Littelfuse 0251001.MXL PICO fuse, rated 125V, 1A with 0.256J joule integral. Very fast blow characteristic in a compact size of 2.8mm x 7.11mm for supplemental circuit protection applications. Operating temperature range -55 to 125 °C, suitable for electric fuse requirements in various industries.
AJT125
AJT125 fuse by Mersen S A is a 125A time delay electric fuse with 600V AC and 500V DC ratings. Measuring 41mm x 76mm, it features TAB/BLADE terminals and a rated breaking capacity of 200kA. Ideal for inline mounting applications requiring high current protection.
0217002.MXP
0217002.MXP by Littelfuse is a 5x20mm fuse with rated current of 2A and rated voltage of 250V. With very fast blow characteristic, it offers circuit protection for applications requiring a max operating temperature of 125°C. Suitable for use in various industries, complies with standards such as CCC, CE, CSA, IEC, UL.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MFU0805FF00800P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Reference Standard: UL; UMF;
MFU0603FF02000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Packing Method: TAPE AND REEL;
MFU0805FF00500P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
MFU0805FF04000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND; Body Width: 1.25 inch;
MFU0805FF03500P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.5 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
MFU0402FF02000E100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: 15 Cel;
MFU0603FF03000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 1.55 mm;
MFU0402FF01000E100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
MFU0603FF03000P500
MFU0603FF01000P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Reference Standard: IEC; UL; UMF;
MFU0603FF01000PW00
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
MFU0603FF01250P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND; Packing Method: TAPE AND REEL;
MFU0603FF01250P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -55 Cel;
MFU0603FF01250PW00
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
MFU0603FF01500PW00
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Body Width: .85 inch;
MFU0603FF01600P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND; Reference Standard: UL; UMF;
MFU0603FF01750P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.75 A; Terminal Shape: WRAPAROUND; Blow Characteristic: VERY FAST;
MFU0603FF01000P1AT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Maximum Operating Temperature: 125 Cel;
MFU0603FF01000PWAT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -55 Cel;
MFU0603FF01000P5AT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Rated Voltage: 50 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved