Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's MFU0603FF04000P100 fuse, rated at 4A and 32V, features a very fast blow characteristic with 0.019 ohm resistance. Measuring 1.55mm x 0.85mm x 0.45mm, it is ideal for electric circuit protection in surface mount applications with UL and UMF standards compliance.
Median Price
$0.184
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.103
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.136
$0.130
$0.128
Mouser Electronics
$0.250
$0.177
Newark
$0.271
$0.198
$0.157
Element14
$23.720
$16.580
$13.760
DigiKey
$0.135
Farnell
$0.120
$0.098
Verical
$0.233
Nova Conductors
TME
$0.230
$0.164
Maritex
$0.264
Chip Stock
Vyrian
IBS Electronics
$0.173
$0.169
LIBRA Elektronik GmbH
Speed Components Ltd
Ampacity Inc.
$0.088
Netroflash
$0.129
$0.126
Authorized Procurement Solutions
Kepictronics
Higher joule rating provides better protection against power surges and electrical faults.
Ideal for low voltage applications, ensuring safe operation within specified limits.
Suitable for handling moderate current loads while providing protection to the circuit.
Can withstand high temperature environments without compromising performance.
Quick response time ensures immediate protection in case of overcurrent or short circuit situations.
Fuses MFU0603FF04000P100 attributes and parameters. Explore more Fuses devices from Vishay Intertechnology
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Resistance:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
MFU0603FF04000P100 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Promax-johnton
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Shenzhen Socay Electronics
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
C1Q3
Bel Fuse
Bel Fuse C1Q3 is a 1206-sized fuse with rated voltage of 125V and current of 3A. It has a very fast blow characteristic, suitable for circuit protection in applications requiring surface mount fuses. The fuse has a rated breaking capacity of 100A and operates b/w -55°C to 125°C temperatures.
LPJ-125SPI
Eaton Corporation
Eaton Corporation's LPJ-125SPI fuse, rated at 125A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 41.4mm x 76.2mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300000A. The fuse comes with built-in indicator and can be mounted inline or in a holder for easy installation.
3413.0002.11
Schurter Ag
Schurter Ag's 3413.0002.11 fuse is a 3.2x1.6mm electric fuse with 0.05A rated current and 125V AC voltage, suitable for circuit protection in various applications. With a very fast blow characteristic and high breaking capacity of 10A, it operates b/w -55°C to 90°C temperatures efficiently, meeting CUL and UL standards for reliable performance.
FNQ-R-1-4/10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.4 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
AJT125N
Mersen S A
AJT125N fuse by Mersen S A is a 125A, time delay electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. It features TAB/BLADE terminals, measures 41mm in diameter and 146mm in height, suitable for inline mounting applications. Compliant with CSA, IEC, and UL standards, it is ideal for circuit protection in systems up to 500V DC.
FRS-R-100
Eaton Corporation's FRS-R-100 fuse, rated at 100A and 600V AC/DC, features a time delay blow characteristic. With a compact body size of 34mm x 200mm, it is suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this RK5 class fuse has a high breaking capacity of 200kA.
LPJ-12SP
LPJ-12SP by Eaton Corporation is a J-class fuse with a rated current of 12A and a rated voltage of 600V. It has a time delay blow characteristic and is suitable for circuit protection in applications such as inline or holder mounting.
FWP-50A22F
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: END CAP;
0219005.MXAP
Littelfuse
Littelfuse 0219005.MXAP fuse, rated 5A and 250V, offers time lag blow characteristic with trip delay of 0.02s. With dimensions of 5x20mm, it provides circuit protection in applications requiring a max operating temperature of 125°C. Compliant with standards such as CCC, CE, CSA, UL, it is suitable for inline mounting in various electronic devices.
LPJ-150SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE;
0466.250NRHF
Littelfuse 0466.250NRHF is a fast-acting supplemental fuse with 0.25A rated current and 125V AC/DC voltage. It has a trip time of 0.2s, dimensions of 3.18mm x 1.52mm x 0.58mm, and is suitable for electric circuit protection applications requiring a compact surface mount design.
JJN-30
The Eaton Corporation's JJN-30 fuse, rated at 30A and 300V AC/160V DC, features a very fast blow characteristic with a breaking capacity of 200kA. With dimensions of 10.3mm x 22.2mm and an end cap terminal shape, it is commonly used for electric circuit protection in various applications due to its CE, CSA, and UL certifications.
FNQ-R-2
The Eaton Corporation FNQ-R-2 fuse is a 2A, 600V time delay CC class fuse with a rated breaking capacity of 200kA. It has nickel terminal finish and dimensions of 10.3mm x 38.1mm, suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, it comes in BOX packing method for easy installation.
AMG-100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Body Width: 15.4 inch;
AJT200N
AJT200N fuse by Mersen S A is a 200A, time delay electric fuse with a rated AC voltage of 600V and DC voltage of 500V. It features TAB/BLADE terminals, measures 41mm in diameter and 146mm in height, with a breaking capacity of 200kA. Ideal for inline mounting applications requiring reliable circuit protection meeting CSA, IEC, and UL standards.
SF-0603S050-2
Bourns
Bourns SF-0603S050-2 fuse, rated 0.5A and 50V DC, with slow blow characteristic and 5-second trip time. Ideal for circuit protection in electronics due to compact 1.6mm x 0.8mm x 0.45mm size and surface mounting feature. Compliant with CUL and UL standards for reliable performance in a range of applications.
0216001MXP
0216001MXP by Littelfuse is a 5x20mm fuse with a rated current of 1A and fast blow characteristic. It has a nominal joule integral of 0.18J, rated AC voltage of 250V, and trip time of 0.01s. Ideal for circuit protection in applications requiring electric fuses with a max operating temperature of 125°C and reference standards including CCC, CE, CSA, PSE, UL, VDE.
LP-CC-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
SF-1206S050-2
SF-1206S050-2 by Bourns is a 1206 size surface mount fuse with a rated current of 0.5A and max operating temperature of 105°C. It is commonly used for circuit protection in electronic devices.
0297004WXNV
Littelfuse 0297004WXNV fuse with 17J nominal joule integral, 10.9mm x 3.8mm x 8.8mm dimensions, and rated current of 4A is ideal for electric circuit protection at temperatures ranging from -40°C to 125°C. It features TAB/BLADE terminals with SILVER finish and is suitable for inline mounting applications up to 32V DC.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MFU0805FF00800P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Reference Standard: UL; UMF;
MFU0805FF04000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND; Body Width: 1.25 inch;
MFU0805FF00500P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Rated Voltage: 32 V;
MFU0603FF00630P100
MFU0603FF00630P100 by Vishay Intertechnology is a surface mount electric fuse with a rated current of 0.63 A and a max operating temperature of 35°C. It has a very fast blow characteristic and is commonly used for circuit protection in various applications.
MFU0805FF01500P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 2 mm;
MFU0603FF01500P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Reference Standard: UL; UMF;
MFU0805FF01000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Reference Standard: UL; UMF;
MFU0603FF01000P100
Vishay Intertechnology's MFU0603FF01000P100 fuse offers a rated current of 1A and very fast blow characteristic. With dimensions of 1.55mm x 0.85mm x 0.45mm, it is ideal for electric circuit protection in applications requiring a max operating temperature of 125°C. This surface mount fuse has a rated breaking capacity of 50A and is UL and UMF compliant.
MFU0805FF02000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Maximum Operating Temperature: 35 Cel;
MFU0603FF02000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Packing Method: TAPE AND REEL;
MFU0805FF00500P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
MFU0805FF03500P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.5 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
MFU0402FF01000E100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
MFU0402FF02000E100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: 15 Cel;
MFU0603FF03000P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 1.55 mm;
MFU0603FF03000P500
MFU0603FF00750P100
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .75 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: 15 Cel;
MFU0603FF04000P500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
MFU0603FF04000PW00
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND; Body Width: .85 inch;
MFU0603FF04000P1AT
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved