Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Moisture Sensitivity Level (MSL): 4;
Median Price
$33.294
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
AZTECH Wire
$13.446
Netroflash
$31.629
$30.963
Cellphone ICs SARA-R410M-63B attributes and parameters. Explore more Cellphone ICs devices from U-blox Ag
Moisture Sensitivity Level (MSL):
Telecom IC Type:
SARA-R410M-63B Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - SARA-R410M-63B obs 21/Dec/2022
PCN Other - Service 14-Jun-2022
Our world is moving fast, soon your car will drive itself and you will carry your doctor in your pocket. Your home will power the grid and you will be connected like never before. At u-blox we are setting the beat delivering the core technology to locate and wirelessly connect people, machines and everything else making us the agile and reliable partner that will take you beyond expectations. With our innovative products and services, we empower customers to locate their devices and connect them from silicon to cloud. Ever since three bright ETH doctorate students and their professor founded u-blox in 1997, two things have driven everything we do: a desire to innovate and a constant focus on giving our customers a real competitive edge.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
General Semiconductor
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Micropac Industries
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
ADF7901BRUZ-RL7
Analog Devices
Analog Devices' ADF7901BRUZ-RL7 is a cellphone IC with 24 terminals in a small outline package. It operates at temperatures from 0 to 50 °C, with a supply voltage of 3V. This RF and baseband circuit is designed for telecom applications requiring surface mount technology.
MAMF-011139-TR1000
M/a-com Technology Solutions
RF FRONT END CIRCUIT;
HMC381LP6ETR
Analog Devices' HMC381LP6ETR is a cellphone IC with 28 terminals in a square chip carrier package. It operates b/w -40 °C to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
HMC687LP4E
Analog Devices' HMC687LP4E is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial telecom applications. With matte tin finish and no-lead terminal form, it supports RF and baseband circuits at 5V nominal voltage.
MAX2306ETI+T
Analog Devices' MAX2306ETI+T is a cellphone IC with 28 terminals in a square chip carrier package. Operating at -40 to 85 °C, it has a supply voltage of 3/3.3V and max current of 0.0415mA. Ideal for baseband circuits, this IC is designed for telecom applications requiring industrial temperature grade performance.
CC1150RSTRG3
The Texas Instruments CC1150RSTRG3 is a cellphone IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 1.8/3.6V and peak reflow temperature of 260°C. Ideal for RF and baseband circuits in industrial telecom applications due to its CMOS technology and compact size.
MAX2674EWT+T
MAX2674EWT+T by Analog Devices is a Cellphone IC with BICMOS tech, 3.3V supply voltage, and RF/Baseband circuit type. It has a temp range of -40 to 85°C, package style GRID ARRAY, and terminal finish of TIN SILVER COPPER NICKEL. Ideal for telecom applications requiring high performance in a compact form factor.
ADF7020BCP
Analog Devices' ADF7020BCP is a cellphone IC with 48 terminals, operating at -40 to 85 °C. It features a supply voltage of 2.5/3.3V and telecom IC type for RF and baseband circuits. The chip carrier package style with a square shape makes it suitable for industrial temperature-grade applications.
1200
The Texas Instruments 1200 is a Cellphone IC with CMOS technology, suitable for RF and baseband circuits. It features a square package style, quad terminal position, and operates in industrial temperature grades (-40 to 85°C). With a nominal voltage of 3V and compact dimensions (4x4mm), it's ideal for telecom applications requiring surface mount compatibility.
SARA-R510S-61B
U-blox Ag
RF AND BASEBAND CIRCUIT;
TRF3702IRHCRG4
TRF3702IRHCRG4 by Texas Instruments is a cellphone IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 5V and max current of 0.17mA. This RF and baseband circuit is ideal for industrial telecom applications due to its compact size and low power consumption.
1185
Amecon
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
CC2511F16RSP
CC2511F16RSP by Texas Instruments is a cellphone IC with 36 terminals in a square chip carrier package. It operates at temperatures from 0 to 85°C and has a supply voltage of 3.3V. This RF and baseband circuit features CMOS technology, making it suitable for various wireless communication applications.
TCM320AC57CDW
TCM320AC57CDW by Texas Instruments is a 20-terminal cellphone IC with A-LAW companding law, 13-bit linear coding, and a 5V supply voltage. It is designed for baseband circuit applications in telecom devices, featuring a small outline package style and gull wing terminal form for surface mount assembly. Operating temperature ranges from 0 to 70°C.
AD6635XBC
AD6635XBC by Analog Devices is a Cellphone IC with 324 terminals in a GRID ARRAY package. Operating temperature ranges from -40 to 70 °C, with power supplies of 2.5V and 3.3V. This CMOS technology BASEBAND CIRCUIT is ideal for cellphone applications due to its compact SQUARE shape and BALL terminal form.
LMV225SDX/NOPB
LMV225SDX/NOPB by Texas Instruments is a cellphone IC with 6 terminals, operating temperature range of -40 to 85°C, and supply current of 8mA. It is a surface-mount RF and baseband circuit suitable for industrial telecom applications due to its small outline package style and low nominal voltage of 2.7V.
TRF371125IRGZR
TRF371125IRGZR by Texas Instruments is a cellphone IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a supply voltage of 5V, making it ideal for telecom applications.
LMV226TL
LMV226TL by Texas Instruments is a cellphone IC with a package style of grid array, very thin profile, and fine pitch. It operates in industrial temperature range from -40 to 85°C and has a nominal voltage of 2.7V. This RF and baseband circuit IC is designed for telecom applications requiring precise performance in compact spaces.
MAX2058ETL+
MAX2058ETL+ by Analog Devices is a 40-terminal cellphone IC with BICMOS technology. It operates b/w -40 to 85 °C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
TRF3710IRGZR
TRF3710IRGZR by Texas Instruments is a cellphone IC with 48 terminals in a square package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SARA-R510M8S-00B
SARA-R410M-02B-01
SARA-R410M-02B-01 by U-blox Ag is a CELLPHONE IC with 96 terminals in a RECTANGULAR GRID ARRAY package. It operates b/w -20°C to 65°C, ideal for RF and baseband circuits. With a supply voltage of 3.8V, it's suitable for commercial telecom applications.
SARA-R410M-02B
SARA-R410M-02B by U-blox Ag is a CELL IC with RECTANGULAR package, 96 terminals, and operates b/w -20 to 65 °C. It is used for RF and baseband circuits in telecom applications due to its 3.8V supply voltage and compact size of 16x26mm.
SARA-R422M8S-00B
SARA-R422S-00B
SARA-R422S-01B
SARA-R422M10S-01B
SARA-R422-00B
SARA-R500S-00B
SARA-R510AWS-01B
TELECOM CIRCUIT;
SARA-R410M-02B-04
RF AND BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 96; Package Code: LGA; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 4;
SARA-R510S-01B
SARA-R410M-02B-03
RF AND BASEBAND CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 96; Package Code: LGA; Package Shape: RECTANGULAR;
SARA-R500S-01B
SARA-U201-04B-00
TELECOM CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: BUTT; No. of Terminals: 96; Package Code: BCC; Package Shape: RECTANGULAR;
SARA-R412M-02B
SARA-R412M-02B by U-blox Ag is a Cellphone IC with 96 terminals in a rectangular grid array package. Operating b/w -20°C to 65°C, it integrates RF and baseband circuits for telecom applications. With a nominal voltage of 3.8V, this surface-mount IC measures 16mm x 26mm and has a low seated height of 2.78mm suitable for compact devices.
SARA-U201-03B-00
SARA-R422-01B
SARA-R510M8S-71B
SARA-R510M8S-61B
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved