Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP630(GB,F) optocoupler features 0.06A max forward current, 85°C max operating temp, and 5000V max isolation voltage. Ideal for applications requiring reliable signal transmission in environments with temperatures ranging from -25°C to 85°C.
Median Price
$0.652
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$0.648
1k+ parts
-
10k+ parts
Nova Conductors
$0.673
Vyrian
Cyclops Electronics Ltd
Semtec, LLC
Advanced Electronics
$0.062
$0.061
$0.059
Aztec Data Supply Inc.
$0.109
Corohmni
$0.639
Continental Prestige Electronics
$0.660
Netroflash
Argo Parts USA
$0.653
AZTECH Wire
$10.629
Ampacity Inc.
$15.100
Authorized Procurement Solutions
Higher forward current allows for more flexibility in the types of loads that can be driven.
High maximum operating temperature ensures reliable performance even in harsh environments.
Wide operating temperature range allows for use in both hot and cold conditions.
Low power dissipation helps in keeping the component cool and improves efficiency.
High current transfer ratio ensures accurate signal transfer with minimal loss.
High isolation voltage provides safety and protection against voltage spikes.
Through hole mounting makes installation and replacement easy and secure.
Low forward voltage drop minimizes power loss and improves efficiency.
The high on-state current rating allows the optocoupler to drive higher current loads.
Optocoupler Transistor Outputs TLP630(GB,F) attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Toshiba
Minimum Current Transfer Ratio:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Power Dissipation:
Sub-Category:
TLP630(GB,F) Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Daco Semiconductor
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Diodes Incorporated
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
OPI1264C
Tt Electronics Plc
OPI1264C by Tt Electronics Plc is a SINGLE optocoupler with 0.04A forward current, 100% min. transfer ratio, and 30V collector-emitter voltage. Ideal for applications requiring high isolation voltage up to 10kV, such as industrial control systems and power supplies.
PS2801-4-F3-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 80 %; Maximum Forward Current: .05 A; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; Maximum Dark Current: 100 nA;
CNY173M
CNY173M by Onsemi is a single optocoupler with max forward current of 0.06A, min transfer ratio of 100%, and max isolation voltage of 4170V. Ideal for applications requiring high-speed response times, such as industrial automation systems or power supply circuits.
TLP290-4
Toshiba TLP290-4 is a 4-channel optocoupler with max. forward current of 0.05A and isolation voltage of 2500V. Ideal for applications requiring high voltage protection, signal transmission, and noise immunity in temperature range -55 to 110°C.
FODM8801CR2
FODM8801CR2 by Onsemi is a single optocoupler with a max forward current of 0.02A and min CTR of 100%. With a breakdown voltage of 75V, it's ideal for applications requiring high isolation voltage and fast response time in temperatures ranging from -40 to 125°C.
FODM121AR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 100 nA; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 80 V;
TLP290(GR,SE
Toshiba TLP290(GR,SE) is a single optocoupler with AC input-transistor output. It has a max forward current of 0.05A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as industrial control systems and power supplies.
4N25V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Current Transfer Ratio: 70 %; Maximum Dark Current: 50 nA; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A;
4N35
NXP Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 3120 V; Maximum Forward Current: .06 A; Configuration: SINGLE; Maximum Dark Current: 500000 nA; No. of Elements: 1;
HMHA2801C
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; JESD-609 Code: e3; Maximum On State Current: .05 A;
TLP184(GB-TPL,E(O
Toshiba's TLP184(GB-TPL,E(O optocoupler features a max forward current of 0.02A, 100% current transfer ratio, and 3750V isolation voltage. Ideal for applications requiring single transistor output optocouplers with temp range -55 to 110°C.
LTV-817S
Lite-on Technology
LTV-817S by Lite-on Technology is a single optocoupler with a max forward current of 0.05A and operating temperature range from -50°C to 110°C. With a min C-E breakdown voltage of 35V, it's ideal for applications requiring high isolation voltage up to 5000V, such as in power supplies or industrial control systems.
CNY65EXI
Vishay Intertechnology
Vishay Intertechnology's CNY65EXI is a single optocoupler with max forward current of 0.075A, ideal for applications requiring high isolation voltage up to 11600V. With a min current transfer ratio of 50%, it operates b/w -55°C to 85°C, making it suitable for through-hole mounting in various electronic circuits.
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 80 %; No. of Elements: 4; JESD-609 Code: e6;
LTV-817S-TA1-A
The Lite-on Technology LTV-817S-TA1-A is a single optocoupler with max. forward current of 0.05 A, response time of 18 µs, and isolation voltage of 5000 V. Ideal for applications requiring high-speed signal transmission in temperature range -30 to 110°C.
TCMT1600
Vishay Telefunken
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Maximum Isolation Voltage: 3750 V; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Current: .06 A;
4N25
Motorola
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; Configuration: SINGLE; JESD-609 Code: e0;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .06 A; Maximum On State Current: .1 A; Maximum Isolation Voltage: 5300 V;
FOD852SD
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Dark Current: 200 nA; Maximum On State Current: .15 A;
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL RECOGNIZED; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 3500 V; Minimum Collector-emitter Breakdown Voltage: 30 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP627-4
Toshiba's TLP627-4 is a 4-channel optocoupler with Darlington output, built-in diode and resistor. It has a max forward current of 0.025A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio and collector-emitter breakdown voltage up to 300V.
TLP620-2
Isocom
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 50 %; No. of Elements: 2; Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.3 V;
Isocom Components
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; JESD-609 Code: e3; Maximum Isolation Voltage: 5300 V; Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel;
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 50 %; Configuration: SEPARATE, 2 CHANNELS; Minimum Collector-emitter Breakdown Voltage: 55 V; Maximum On State Current: .05 A;
TLP620-4(GB)
Toshiba's TLP620-4(GB) is a 4-channel optocoupler with AC input-transistor output. It features 100% min current transfer ratio, 55V min collector-emitter breakdown voltage, and 5000V max isolation voltage. Ideal for applications requiring high electrical isolation and signal transmission in industrial settings.
TLP620-4GB
TLP620-4GB by Isocom Components is a 4-channel optocoupler with built-in diode, featuring AC input-transistor output. With a max forward current of 0.05A and isolation voltage of 5300V, it operates b/w -30°C to 100°C. Ideal for applications requiring high collector-emitter breakdown voltage and reliable current transfer ratio of 100%.
TLP-627-4(F)
Toshiba TLP-627-4(F) is a 4-channel optocoupler with Darlington output, built-in diode and resistor. It has a max forward current of 0.025A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio and collector-emitter breakdown voltage up to 300V.
TLP627M(E
Toshiba's TLP627M(E is an optocoupler with Darlington output, built-in diode, and resistor. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. With a collector-emitter breakdown voltage of 300V, it's ideal for applications requiring high isolation voltage up to 5000V.
TLP627MF(D4,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 1000 %; Maximum Operating Temperature: 110 Cel; Maximum Forward Current: .05 A; Additional Features: UL RECOGNIZED, VDE AAPROVED;
TLP627MF(TP4,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Power Dissipation: .15 W; Nominal Current Transfer Ratio: 6000 %; Additional Features: UL RECOGNIZED; Maximum On State Current: .15 A;
TLP627F
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 200 nA; Minimum Operating Temperature: -25 Cel; Minimum Current Transfer Ratio: 1000 %; Nominal Current Transfer Ratio: 4000 %;
TLP627MF(E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Maximum Power Dissipation: .15 W; Nominal Current Transfer Ratio: 6000 %; Additional Features: UL RECOGNIZED;
TLP620-4(F)
Toshiba's TLP620-4(F) is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.02A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring electrical isolation b/w high-voltage circuits and low-voltage components.
TLP627M(D4-TP1,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Maximum Dark Current: 200 nA; Minimum Current Transfer Ratio: 1000 %; Additional Features: UL RECOGNIZED, VDE AAPROVED;
TLP621-2X
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Power Dissipation: .15 W; Packing Method: TUBE; Maximum Operating Temperature: 100 Cel;
TLP627M(LF1,E
Toshiba's TLP627M(LF1,E is a Darlington output optocoupler with 0.05A max forward current, 300V min collector-emitter breakdown voltage, and 5000V max isolation voltage. Ideal for applications requiring high current transfer ratio, such as motor control circuits or power supply feedback systems.
TLP620-2(GB,F)
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 85 Cel; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -25 Cel; Configuration: SEPARATE, 2 CHANNELS;
TLP621-2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Configuration: SEPARATE, 2 CHANNELS; Nominal Current Transfer Ratio: 50 %; Maximum Isolation Voltage: 5300 V; JESD-609 Code: e3;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: UL RECOGNIZED; Maximum Forward Voltage: 1.3 V; Maximum Power Dissipation: .1 W; Minimum Operating Temperature: -25 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Configuration: SEPARATE, 2 CHANNELS; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .05 A; Maximum Forward Voltage: 1.3 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved