Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD817AS by Onsemi is a single optocoupler with a max forward current of 0.05A and min CTR of 80%. It operates b/w -55 to 110°C, has an isolation voltage of 5000V, and is ideal for applications requiring transistor output optocouplers in surface mount configurations.
Median Price
$0.190
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Arrow
1+ parts
$0.380
100+ parts
$0.192
1k+ parts
$0.152
10k+ parts
$0.109
Mouser Electronics
$0.440
$0.217
$0.179
-
Adafruit Industries
$0.753
$0.715
Verical
$0.205
Master Electronics
$0.174
Chip1Stop
$0.167
$0.138
RS (Exports)
$0.137
Rochester
$0.140
$0.116
$0.103
Digiode
$0.108
TME
$0.350
$0.148
$0.106
Nova Conductors
$0.356
Component Electronics Inc.
$0.290
$0.250
Chip Stock
IBS Electronics
$0.253
$0.172
ACDS - Activité Composants Distribution Service
NAC Semi
$0.294
Vyrian
Flip Electronics
Connector Distribution Corp
Right Parts Inc.
Holdelec - ElecDif-Pro
Cyclops Electronics Ltd
Prism Electronics
Bristol Electronics
Sea View Technologies
PC Components Company LLC
Semicontronic
$0.060
$0.058
Ampacity Inc.
Corphita
Corohmni
$0.114
Aztec Data Supply Inc.
$0.212
Aranea Global
$0.349
$0.335
Continental Prestige Electronics
Argo Parts USA
$0.346
Component Stockers USA
$0.510
Advanced Electronics
Perfect Parts
GreenTree Electronics
SupplyDigital Components
Problanco Electronics
Authorized Procurement Solutions
TANS Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Kulean Microsystems
A-Z Elektronik GmbH
Allen Electronics Distributors
$0.158
$0.124
$0.096
Alle Elektronik GmbH
S.R.D Solutions
Robosynatics
Lucentia Tech
Supply Digital
UHIMA Technologies
Single configuration is easy to manage and install, making it a convenient choice for users.
With a maximum forward current of 0.05 A, this optocoupler transistor output can handle moderate power requirements efficiently.
The transistor output optocoupler type offers high reliability and performance for various applications.
The high maximum operating temperature of 110°C ensures stable performance even in demanding environments.
The low minimum operating temperature of -55°C allows for use in a wide range of temperature conditions.
The matte tin terminal finish provides good solderability and ensures a secure connection.
The maximum power dissipation of 0.15 W indicates the capability of handling power efficiently without overheating.
With a minimum current transfer ratio of 80%, this optocoupler transistor output ensures accurate signal transmission.
The low maximum dark current of 100 nA minimizes leakage current and improves overall performance.
Packed in a tube, it is easy to store and protects the product from damage during transportation.
The very fast maximum response time of 0.000018 s ensures quick signal transmission and response.
The minimum collector-emitter breakdown voltage of 70 V provides protection against overvoltage situations.
With a nominal current transfer ratio of 80%, this product maintains consistent performance over time.
With a high maximum isolation voltage of 5000 V, this optocoupler transistor output ensures safe electrical isolation.
The surface mounting feature enables easy and secure installation on circuit boards.
The low maximum forward voltage of 1.4 V reduces power consumption and heat generation.
The maximum on-state current of 0.05 A allows for reliable operation under load conditions.
Optocoupler Transistor Outputs FOD817AS attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
Maximum Response Time:
Sub-Category:
Terminal Finish:
FOD817AS Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
EU2B-YS303C
Idec
ROTARY SWITCH;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Formosa Microsemi
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HCNR200-300E
Agilent Technologies
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; Maximum Forward Voltage: 1.85 V; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
LTV-357TA
Lite-on Technology
LTV-357TA by Lite-on Technology is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C. With a collector-emitter breakdown voltage of 35V, it is ideal for applications requiring high isolation voltage and fast response time in surface mount configurations.
IL300-F
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A;
TLP293-4(GBTPR,E
Toshiba
Toshiba's TLP293-4(GBTPR,E is a 4-channel optocoupler with max. forward current of 0.05A and min. transfer ratio of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature, operating in temp range -55 to 125°C.
CNY17-3X007T
Vishay Intertechnology's CNY17-3X007T is a single optocoupler with max forward current of 0.06A, ideal for applications requiring transistor output optocouplers. With a min operating temp of -55°C and max temp of 100°C, it offers high isolation voltage of 5300V, making it suitable for surface mount configurations. Its nominal current transfer ratio is 70%, ensuring efficient performance in various electronic circuits.
4N35M
Ct Micro International
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 50 nA; Additional Features: UL APPROVED, VDE APPROVED; Nominal Current Transfer Ratio: 100 %; Configuration: SINGLE; Maximum Isolation Voltage: 5000 V;
H11G1SM
Onsemi
The Onsemi H11G1SM is a single optocoupler with a Darlington output, featuring a max forward current of 0.06A and an isolation voltage of 7500V. With a min operating temperature of -40°C and max of 100°C, it is ideal for applications requiring high current transfer ratio, such as industrial control systems and power supplies.
MCT62
Qt Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Configuration: SEPARATE, 2 CHANNELS; Maximum Forward Current: .06 A; Maximum Dark Current: 100 nA;
CNY17-3SM
Isocom Components
The Isocom Components CNY17-3SM is a single optocoupler with a max forward current of 0.06A, ideal for applications requiring high isolation voltage up to 5300V. With a min operating temp of -55°C and max temp of 100°C, it offers reliable performance in various environments. Its transistor output type and surface mount feature make it suitable for electronic circuits needing efficient signal transmission.
TLP290-4(TP,E
Toshiba's TLP290-4(TP,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. Ideal for AC input-transistor output applications, featuring high isolation voltage of 2500V and surface mounting feature.
PS2701-1-F3-A
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .05 A;
CNY65EXI
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Silver (Ag); Nominal Current Transfer Ratio: 100 %; Maximum Power Dissipation: .25 W; Maximum Dark Current: 200 nA;
SFH6186-4T
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum On State Current: .05 A; Minimum Current Transfer Ratio: 160 %; Maximum Forward Voltage: 1.5 V; No. of Elements: 1;
CNY173M
CNY173M by Onsemi is a single optocoupler with max forward current of 0.06A, min transfer ratio of 100%, and max isolation voltage of 4170V. Ideal for applications requiring high-speed response times, such as industrial automation systems or power supply circuits.
LTV-847S
LTV-847S by Lite-on Technology is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -30°C to 100°C. Ideal for applications requiring high isolation voltage and fast response time in surface mount setups.
SFH6916T
SFH6916T by Vishay Intertechnology is a 4-channel optocoupler with a max forward current of 0.05 A and a min operating temperature of -55°C. It is commonly used in applications requiring high isolation voltage and surface mounting feature.
ILD213T
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .03 A; Minimum Current Transfer Ratio: 100 %; Maximum Dark Current: 50 nA; Maximum Isolation Voltage: 4000 V;
Renesas Electronics
PS2701-1-F3-A by Renesas Electronics is a SINGLE optocoupler with max. forward current of 0.05A, min. collector-emitter breakdown voltage of 40V, and max. isolation voltage of 3750V. It is used in applications requiring high electrical isolation such as industrial automation and power supplies due to its transistor output design.
4N35-X007
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -55 Cel; Maximum Dark Current: 50 nA; No. of Elements: 1; Maximum Isolation Voltage: 5300 V;
TLP293-4(TPE(T
Toshiba's TLP293-4(TPE(T is a transistor output optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 125°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable optical coupling in industrial electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD817ASD
FOD817ASD by Onsemi is a SINGLE optocoupler with a max forward current of 0.05 A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000 V. With a fast response time of 18 µs, it is suitable for surface mounting in various electronic circuits where low dark current and high collector-emitter breakdown voltage are essential.
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Configuration: SINGLE;
FOD817A3SD
FOD817A3SD by Onsemi is a SINGLE optocoupler with 0.05 A forward current, 80% min CTR, and 70 V min CE breakdown voltage. Ideal for applications requiring high isolation voltage of 5000 V, such as industrial control systems and power supplies.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Maximum Isolation Voltage: 5000 V; Nominal Current Transfer Ratio: 80 %;
FOD817DSD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Minimum Current Transfer Ratio: 300 %; Maximum Power Dissipation: .15 W;
FOD817DSD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 300%, and max. isolation voltage of 5000V. Ideal for applications requiring high voltage isolation such as industrial controls, power supplies, and motor drives due to its surface mounting feature and fast response time of 18μs.
FOD817CSD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Response Time: .000018 s; Maximum Dark Current: 100 nA;
FOD817CSD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000V. With a fast response time of 18μs, it is suitable for surface mounting in various electronic circuits needing reliable transistor output optocouplers.
FOD817B3SD
FOD817B3SD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 130%, and max. isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and reliable signal transmission in temperature range -55 to 110°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
FOD817BSD
FOD817BSD by Onsemi is a single optocoupler with max forward current of 0.05A, min operating temp -55°C, and max isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Power Dissipation: .15 W; Maximum On State Current: .05 A;
FOD817D3SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Current Transfer Ratio: 300 %; JESD-609 Code: e3; Additional Features: UL APPROVED, VDE APPROVED;
FOD817SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum On State Current: .05 A; Configuration: SINGLE; JESD-609 Code: e3;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Nominal Current Transfer Ratio: 50 %;
FOD852SD
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Collector-emitter Breakdown Voltage: 300 V; Maximum Operating Temperature: 100 Cel; Maximum Response Time: .0003 s;
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Dark Current: 200 nA; Maximum On State Current: .15 A;
FOD817DS
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Voltage: 1.4 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Power Dissipation: .15 W; Additional Features: UL APPROVED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved