Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD817ASD by Onsemi is a SINGLE optocoupler with a max forward current of 0.05 A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000 V. With a fast response time of 18 µs, it is suitable for surface mounting in various electronic circuits where low dark current and high collector-emitter breakdown voltage are essential.
Median Price
$0.165
Lifecycle Status
Suppliers In-Stock
47
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.364
100+ parts
$0.276
1k+ parts
$0.199
10k+ parts
-
Newark
$0.515
$0.245
$0.146
$0.133
DigiKey
$0.520
$0.258
$0.213
Adafruit Industries
$0.605
$0.574
Mouser Electronics
$0.630
$0.292
$0.173
Future Electronics
$0.082
$0.077
Avnet
Arrow
$0.097
$0.085
Verical
Master Electronics
$0.139
$0.125
EBV Elektronik
Rochester
$0.137
$0.122
Farnell
$0.156
$0.119
Element14
$0.246
$0.185
Chip1Stop
$0.115
$0.114
Nova Conductors
$0.206
Maritex
$0.251
$0.131
TME
$0.320
$0.179
$0.175
Digiode
$0.346
Ozdisan Elektronik
$66.091
IBS Electronics
$0.195
NAC Semi
Flip Electronics
Vyrian
Chip Stock
Sensible Micro Corp
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Connector Distribution Corp
Right Parts Inc.
Bristol Electronics
Martec Srl
Connect4Technologies Inc.
EPE Components Inc.
Semi Source
PC Components Company LLC
Component Sense
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Holdelec - ElecDif-Pro
Prism Electronics
North Shore Components
Odi Ramu Company
Electronic Treasures
Microfarads
Carlin Systems, Inc.
Inventory MP
Ampacity Inc.
$0.099
Semicontronic
$0.096
Corohmni
$0.117
Argo Parts USA
$0.177
$0.172
Modulus Dynamics
$0.203
$0.201
Netroflash
$0.202
Corphita
$0.328
Aztec Data Supply Inc.
$0.413
Advanced Electronics
Continental Prestige Electronics
$0.625
$0.194
$0.141
Perfect Parts
Component Connect
GreenTree Electronics
Metaverse IC Inc.
iodParts Technologies Inc.
$0.230
$0.197
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Lixinc
Authorized Procurement Solutions
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
Supply Digital
Allen Electronics Distributors
TANS Electronics
S.R.D Solutions
Eastek
Formix International (Excess)
UHIMA Technologies
Infinite Electronics LLP (Excess)
Robosynatics
$2.292
Lucentia Tech
SINGLE configuration offers simplicity and ease of use for various applications.
A high maximum forward current allows for versatility in different load requirements.
Transistor output optocoupler provides efficient signal isolation and voltage level shifting.
With a high maximum operating temperature, this product can withstand elevated temperatures.
Operational in extreme low temperatures, offering reliability in harsh environments.
Matte Tin finish ensures good solderability and long-term stability.
Efficient power dissipation capability for reliable performance.
High current transfer ratio ensures accurate and consistent signal transfer.
Low dark current minimizes power consumption and signal interference.
TR packing method offers convenient packaging for ease of handling and storage.
Ultra-fast response time for quick signal transmission and high-speed applications.
High breakdown voltage provides protection against voltage spikes and surges.
Consistent and reliable current transfer ratio for stable signal transmission.
High isolation voltage ensures safety and protection against voltage differences.
Surface mount design enables easy and secure installation on PCBs.
Low forward voltage drop for efficient power usage and minimal heat generation.
High on-state current handling capability for reliable operation under load.
Optocoupler Transistor Outputs FOD817ASD attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
Maximum Response Time:
Sub-Category:
Terminal Finish:
FOD817ASD Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017 Mult Changes 11/Aug/2021
PCN Assembly/Origin - FOD 11-3-22
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
261
Deltrol Controls
Other Relays;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WT
Sangdest Microelectronics (Nanjing)
PC817C
Sharp Corporation
Sharp Corporation's PC817C is a single optocoupler with max forward current of 0.05A, operating temp range -30 to 100°C, and isolation voltage of 5000V. It has a collector-emitter breakdown voltage of 35V, dark current at 100nA, and transfer ratio of 200%. Ideal for applications requiring high isolation and signal transfer in electronic circuits.
SFH6156-4T
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Voltage: 1.65 V; Minimum Current Transfer Ratio: 56 %; Maximum Forward Current: .06 A; Maximum On State Current: .05 A;
TCMT1100
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Maximum On State Current: .05 A; Minimum Operating Temperature: -40 Cel;
SFH6106-3T
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Dark Current: 100 nA;
HCPL-181-00CE
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum On State Current: .05 A; Maximum Operating Temperature: 100 Cel;
ILD217T
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; No. of Elements: 2; Maximum Forward Current: .03 A;
FODM121V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 50 %; Maximum Forward Current: .05 A;
TLP383(GR-TPLE(T
Toshiba
Toshiba's TLP383(GR-TPLE(T is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 5000V. With a min C-E breakdown voltage of 80V and min. transfer ratio of 100%, it operates b/w -55°C to 125°C, making it suitable for surface mount configurations in various electronic devices.
4N27
Ct Micro International
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 10 %; Maximum Operating Temperature: 110 Cel; Maximum Isolation Voltage: 5000 V;
6N135
Philips Semiconductors
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.7 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
SFH6156-4
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V;
HCPL2731
Rs Components
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .02 A; Maximum Power Dissipation: .1 W; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 3000 V;
PS2801C-4-F3-A
California Eastern Laboratories
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 50 %; Minimum Operating Temperature: -55 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Dark Current: 100 nA; Additional Features: UL APPROVED;
PS2811-1-F3-A-M
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); No. of Elements: 1; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel;
H11G1TVM
Onsemi
The Onsemi H11G1TVM is a single optocoupler with a max forward current of 0.06A and Darlington output type. It operates b/w -40°C to 100°C, has an isolation voltage of 7500V, and is ideal for applications requiring high current transfer ratio in through-hole mounting configurations.
SFH6156-3-X001T
SFH6156-3-X001T by Infineon is a SINGLE optocoupler with 0.06A forward current, 100% transfer ratio, and 5300V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage of 70V in temperatures ranging from -55 to 100°C.
PS2801-1-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 80 %; Maximum Forward Current: .05 A; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Operating Temperature: 100 Cel;
LTV-352T
Lite-on Technology
LTV-352T by Lite-on Technology is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.05A, Darlington output type, and min operating temperature of -55°C. Ideal for applications requiring high isolation voltage and fast response time in a surface mount configuration.
Marktech Optoelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Minimum Current Transfer Ratio: 7 %; Maximum Operating Temperature: 100 Cel;
SFH6156-3T
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 100 %; Configuration: SINGLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD817ASD
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Configuration: SINGLE;
FOD817A3SD
FOD817A3SD by Onsemi is a SINGLE optocoupler with 0.05 A forward current, 80% min CTR, and 70 V min CE breakdown voltage. Ideal for applications requiring high isolation voltage of 5000 V, such as industrial control systems and power supplies.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Maximum Isolation Voltage: 5000 V; Nominal Current Transfer Ratio: 80 %;
FOD817DSD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Minimum Current Transfer Ratio: 300 %; Maximum Power Dissipation: .15 W;
FOD817DSD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 300%, and max. isolation voltage of 5000V. Ideal for applications requiring high voltage isolation such as industrial controls, power supplies, and motor drives due to its surface mounting feature and fast response time of 18μs.
FOD817CSD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Response Time: .000018 s; Maximum Dark Current: 100 nA;
FOD817CSD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000V. With a fast response time of 18μs, it is suitable for surface mounting in various electronic circuits needing reliable transistor output optocouplers.
FOD817B3SD
FOD817B3SD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 130%, and max. isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and reliable signal transmission in temperature range -55 to 110°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
FOD817BSD
FOD817BSD by Onsemi is a single optocoupler with max forward current of 0.05A, min operating temp -55°C, and max isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Power Dissipation: .15 W; Maximum On State Current: .05 A;
FOD817D3SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Current Transfer Ratio: 300 %; JESD-609 Code: e3; Additional Features: UL APPROVED, VDE APPROVED;
FOD817SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum On State Current: .05 A; Configuration: SINGLE; JESD-609 Code: e3;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Nominal Current Transfer Ratio: 50 %;
FOD852SD
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Collector-emitter Breakdown Voltage: 300 V; Maximum Operating Temperature: 100 Cel; Maximum Response Time: .0003 s;
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Dark Current: 200 nA; Maximum On State Current: .15 A;
FOD817DS
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Voltage: 1.4 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Power Dissipation: .15 W; Additional Features: UL APPROVED;
FOD817300
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 100 nA; Configuration: SINGLE; Nominal Current Transfer Ratio: 50 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved