Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD817B3SD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 130%, and max. isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and reliable signal transmission in temperature range -55 to 110°C.
Median Price
$0.184
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.091
100+ parts
$0.086
1k+ parts
10k+ parts
-
Farnell
$0.319
$0.131
Mouser Electronics
$0.530
$0.255
$0.167
$0.155
Newark
$0.536
$0.263
$0.216
DigiKey
$0.540
$0.265
$0.218
Distrelec
$0.576
$0.446
$0.359
Verical
$0.132
$0.110
Future Electronics
$0.087
$0.082
Master Electronics
$0.115
$0.112
Arrow
$0.151
$0.126
Rochester
$0.170
$0.141
Element14
$0.195
$0.157
RS (Exports)
$0.227
$0.173
$0.206
Chip1Stop
$0.172
$0.133
Digiode
TME
$0.290
$0.153
$0.127
Maritex
$0.305
$0.160
$0.139
Bristol Electronics
$0.750
$0.375
$0.150
Nova Conductors
$1.000
Component Electronics Inc.
$1.540
$1.150
NAC Semi
$0.190
Chip Stock
Flip Electronics
Vyrian
IBS Electronics
$0.161
$0.154
ComSIT Distribution GmbH
Cyclops Electronics Ltd
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
Cogito LLC
Dan-Mar Components
Martec Srl
Holdelec - ElecDif-Pro
Ack Elektronik San.Tic.Ltd.Sti
Connector Distribution Corp
Right Parts Inc.
Microfarads
Prism Electronics
Ampacity Inc.
$0.077
Semicontronic
$0.075
Corphita
Advanced Electronics
Corohmni
Argo Parts USA
$0.168
$0.163
Aztec Data Supply Inc.
$0.181
Continental Prestige Electronics
$0.502
Modulus Dynamics
$0.539
Bastille Electronics
$0.950
$0.902
$0.890
Perfect Parts
Eastek
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
RC Electronics
$0.180
Glotronic Ltd.
Metaverse IC Inc.
GreenTree Electronics
Epart123
$0.880
Futuretech Components
SupplyDigital Components
Kulean Microsystems
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Formix International (Excess)
UHIMA Technologies
Problanco Electronics
Robosynatics
Lucentia Tech
Supply Digital
The single configuration of this optocoupler transistor output makes it easy to integrate into various electronic systems.
With a maximum forward current of 0.05 A, this product is suitable for low power applications.
The transistor output optocoupler type ensures reliable signal transmission between different circuits.
With a maximum operating temperature of 110°C, this product can withstand high heat environments.
The wide range of minimum operating temperature (-55°C) allows for use in both cold and hot environments.
The matte tin terminal finish provides a stable and durable connection for long-term use.
The low maximum power dissipation of 0.15 W helps in reducing energy consumption and heat dissipation.
The high minimum current transfer ratio of 130% ensures accurate signal transmission between input and output.
With a maximum dark current of 100 nA, this product minimizes interference in low light conditions.
The TR packing method ensures that the product is securely packaged and protected during transportation and storage.
The incredibly fast maximum response time of 0.000018 seconds helps in quick signal transmission and response.
The high minimum collector-emitter breakdown voltage of 70 V provides protection against voltage spikes and surges.
The nominal current transfer ratio of 130% ensures consistent and reliable signal transmission.
With a maximum isolation voltage of 5000 V, this product provides a high level of electrical insulation for safety.
The surface mounting feature makes installation easy and convenient, saving space in electronic designs.
The low maximum forward voltage of 1.4 V helps in reducing power consumption and heat generation.
With a maximum on-state current of 0.05 A, this product can handle high current loads effectively.
Optocoupler Transistor Outputs FOD817B3SD attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
Maximum Response Time:
Sub-Category:
Terminal Finish:
FOD817B3SD Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017 Mult Changes 11/Aug/2021
PCN Assembly/Origin - FOD 11-3-22
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
Microchip Technology
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
ROHM
FOD817AS
FOD817AS by Onsemi is a single optocoupler with a max forward current of 0.05A and min CTR of 80%. It operates b/w -55 to 110°C, has an isolation voltage of 5000V, and is ideal for applications requiring transistor output optocouplers in surface mount configurations.
SFH690BT
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Additional Features: UL RECOGNIZED;
4N25-X009T
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 5300 V; Additional Features: UL RECOGNIZED; Maximum Forward Current: .06 A;
TLP281-4(GB-TP)
Toshiba
Toshiba's TLP281-4(GB-TP) is a 4-element optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 100°C, and max. isolation voltage of 2500V. Ideal for surface mount applications requiring high isolation and low power dissipation in electronic circuits.
TLP181(GB-TPL)
Toshiba's TLP181(GB-TPL) is a single optocoupler with max. forward current of 0.05A, operating temp. range from -25 to 85°C, and isolation voltage up to 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in electronic circuits.
TLP383(GR-TPLE(T
Toshiba's TLP383(GR-TPLE(T is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 5000V. With a min C-E breakdown voltage of 80V and min. transfer ratio of 100%, it operates b/w -55°C to 125°C, making it suitable for surface mount configurations in various electronic devices.
6N135
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Power Dissipation: .1 W;
PS2801-1-F3-A-N
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 100 nA; Configuration: SINGLE; No. of Elements: 1;
4N35
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 3550 V; Maximum Dark Current: 50 nA; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
CNY17-3X006
Vishay Intertechnology's CNY17-3X006 is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring transistor output optocouplers in through-hole mounting configurations.
PS2801-4-A
Nec
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .05 A; Maximum Power Dissipation: .08 W; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 2500 V;
FOD817CSD
FOD817CSD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000V. With a fast response time of 18μs, it is suitable for surface mounting in various electronic circuits needing reliable transistor output optocouplers.
TLP290-4(E(T
Toshiba's TLP290-4(E(T) is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05 A and can operate in temperatures ranging from -55 to 110 °C. This surface mount device is commonly used for AC input-transistor output applications requiring high isolation voltage (2500 V).
TCMD1000
Vishay Intertechnology's TCMD1000 is a single Darlington output optocoupler with max forward current of 0.06A and min operating temp of -40°C. Ideal for applications requiring high isolation voltage up to 3750V, such as in surface mount configurations for power control circuits.
SFH6186-3X001T
Vishay Intertechnology SFH6186-3X001T is a single optocoupler with max. forward current of 0.05A, min. transfer ratio of 100%, and max. isolation voltage of 5300V. Ideal for applications requiring high voltage isolation, such as industrial control systems and power supplies due to its surface mount feature and transistor output design.
TLP187(TPL,E(T
Toshiba's TLP187(TPL,E(T optocoupler features a Darlington output with 0.05A forward current, 300V breakdown voltage, and 3750V isolation. Ideal for applications requiring high current transfer ratio, such as industrial automation systems and power control circuits. Operating temperature ranges from -55°C to 110°C ensure reliability in various environments.
PS2801C-4-F3-A
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 2500 V; Additional Features: UL RECOGNIZED; Maximum Dark Current: 100 nA; Maximum Forward Current: .03 A;
FOD817A
FOD817A by Onsemi is a single optocoupler with a max forward current of 0.05A and min CTR of 80%. It operates b/w -55°C to 110°C, has an isolation voltage of 5000V, and is ideal for applications requiring fast response times in through-hole mounting configurations.
PS2501L-4-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .08 A; Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 80 V;
General Instrument Optoelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On State Current: .01 A; No. of Elements: 1; Minimum Current Transfer Ratio: 7 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD817ASD
FOD817ASD by Onsemi is a SINGLE optocoupler with a max forward current of 0.05 A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000 V. With a fast response time of 18 µs, it is suitable for surface mounting in various electronic circuits where low dark current and high collector-emitter breakdown voltage are essential.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Configuration: SINGLE;
FOD817A3SD
FOD817A3SD by Onsemi is a SINGLE optocoupler with 0.05 A forward current, 80% min CTR, and 70 V min CE breakdown voltage. Ideal for applications requiring high isolation voltage of 5000 V, such as industrial control systems and power supplies.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Maximum Isolation Voltage: 5000 V; Nominal Current Transfer Ratio: 80 %;
FOD817DSD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Minimum Current Transfer Ratio: 300 %; Maximum Power Dissipation: .15 W;
FOD817DSD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 300%, and max. isolation voltage of 5000V. Ideal for applications requiring high voltage isolation such as industrial controls, power supplies, and motor drives due to its surface mounting feature and fast response time of 18μs.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Response Time: .000018 s; Maximum Dark Current: 100 nA;
FOD817B3SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
FOD817BSD
FOD817BSD by Onsemi is a single optocoupler with max forward current of 0.05A, min operating temp -55°C, and max isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Power Dissipation: .15 W; Maximum On State Current: .05 A;
FOD817D3SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Current Transfer Ratio: 300 %; JESD-609 Code: e3; Additional Features: UL APPROVED, VDE APPROVED;
FOD817SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum On State Current: .05 A; Configuration: SINGLE; JESD-609 Code: e3;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Nominal Current Transfer Ratio: 50 %;
FOD852SD
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Collector-emitter Breakdown Voltage: 300 V; Maximum Operating Temperature: 100 Cel; Maximum Response Time: .0003 s;
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Dark Current: 200 nA; Maximum On State Current: .15 A;
FOD817DS
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Voltage: 1.4 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Power Dissipation: .15 W; Additional Features: UL APPROVED;
FOD817CW
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 200 %; Nominal Current Transfer Ratio: 200 %; Minimum Collector-emitter Breakdown Voltage: 70 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved