Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi HMHA2801A is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and surface mounting feature.
Median Price
$0.292
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.282
100+ parts
$0.268
1k+ parts
10k+ parts
-
Farnell
$0.614
$0.230
$0.227
DigiKey
$0.710
$0.242
Mouser Electronics
$0.730
$0.352
Newark
$0.731
$0.428
$0.300
$0.267
Element14
$55.610
$26.150
$23.630
Verical
$0.214
$0.185
Chip1Stop
$0.202
Future Electronics
$0.127
Rochester
$0.255
$0.211
$0.189
Arrow
$0.123
Digiode
$0.198
IBS Electronics
$0.205
$0.191
Nova Conductors
$0.270
TME
$0.670
$0.363
$0.345
$0.308
Chip Stock
NAC Semi
$0.469
Flip Electronics
LWI Electronics Inc
Vyrian
Sunrise Surplus Inc.
Cyclops Electronics Ltd
Inventory MP
Bristol Electronics
Prism Electronics
Component Sense
$1.250
Semtec, LLC
Ampacity Inc.
$0.155
Semicontronic
$0.151
$0.150
Corphita
$0.187
Corohmni
$0.201
Argo Parts USA
$0.266
$0.258
Advanced Electronics
Continental Prestige Electronics
$0.506
$0.218
$0.160
$0.149
Component Stockers USA
$0.650
$0.280
$0.210
Aztec Data Supply Inc.
$0.759
Andel Nordic
$9.425
$9.048
Perfect Parts
Authorized Procurement Solutions
Eastek
Problanco Electronics
TANS Electronics
Kulean Microsystems
Robosynatics
$0.269
$0.263
Lucentia Tech
Lixinc
SupplyDigital Components
S.R.D Solutions
iodParts Technologies Inc.
A-Z Elektronik GmbH
Glotronic Ltd.
Alle Elektronik GmbH
UHIMA Technologies
Supply Digital
Kepictronics
Speed Components Ltd (Excess)
Single configuration simplifies installation and reduces complexity of the circuit design.
High maximum forward current allows for reliable operation in a variety of applications that require higher current levels.
Transistor output optocoupler provides flexibility in interfacing with different types of electronic circuits.
High maximum operating temperature ensures stability and performance even in elevated temperature environments.
Wide range of minimum operating temperature makes this product suitable for use in both cold and hot conditions.
Matte tin terminal finish offers good solderability and corrosion resistance.
High maximum power dissipation capability allows for efficient power handling without overheating.
High minimum current transfer ratio ensures accurate signal transmission between input and output circuits.
Low maximum dark current helps minimize power consumption when the optocoupler is in the off state.
High minimum collector-emitter breakdown voltage provides protection against voltage spikes and overloads.
High nominal current transfer ratio offers consistent performance over a range of operating conditions.
High maximum isolation voltage ensures reliable electrical insulation between input and output circuits.
Surface mounting feature simplifies PCB assembly and saves space in compact electronic designs.
Low maximum forward voltage helps in reducing power losses and improving efficiency of the optocoupler.
High maximum on-state current allows for reliable switching performance in various load conditions.
Optocoupler Transistor Outputs HMHA2801A attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
HMHA2801A Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Transistor
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Infinex
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microchip Technology
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
4N35
Ct Micro International
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 80 V; Additional Features: UL APPROVED, VDE APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
SFH6156-3-X001
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 70 V; Minimum Operating Temperature: -55 Cel; Maximum Dark Current: 100 nA; No. of Elements: 1;
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL RECOGNIZED; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 3500 V; Minimum Collector-emitter Breakdown Voltage: 30 V;
TLP181F
Toshiba
Toshiba's TLP181F is a single optocoupler with a max forward current of 0.02A, operating b/w -55°C to 110°C. It features a collector-emitter breakdown voltage of 80V and an isolation voltage of 3750V, making it ideal for applications requiring high electrical isolation and signal transmission accuracy.
SFH6156-4T
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 100 nA; No. of Elements: 1;
IL207AT
Vishay Intertechnology
Vishay Intertechnology's IL207AT is a single optocoupler with a max forward current of 0.06A and operating temperature range from -55°C to 100°C. With a min CTR of 34%, it offers high isolation voltage of 3000V, making it ideal for applications requiring reliable signal transmission in harsh environments.
TLP293(GR-TPL,E
Toshiba's TLP293(GR-TPL,E is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a min. C-E breakdown voltage of 80V and surface mount feature, it operates b/w -55°C to 125°C efficiently.
PC817C
Sharp Corporation
Sharp Corporation's PC817C is a single optocoupler with max forward current of 0.05A, operating temp range -30 to 100°C, and isolation voltage of 5000V. It has a collector-emitter breakdown voltage of 35V, dark current at 100nA, and transfer ratio of 200%. Ideal for applications requiring high isolation and signal transfer in electronic circuits.
4N32M
Everlight Electronics
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: NOT SPECIFIED; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; Maximum Dark Current: 100 nA; Maximum Forward Current: .06 A;
HCPL-181-06CE
Broadcom
Broadcom's HCPL-181-06CE is a single optocoupler with a max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a response time of 18μs and collector-emitter breakdown voltage of 80V, it's suitable for surface mount configurations in various electronic systems.
4N25
Qt Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 50 nA; Maximum Isolation Voltage: 5300 V;
SFH6156-2T
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 45 %; Maximum Dark Current: 50 nA; Maximum Isolation Voltage: 5300 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
PS2801-1-F3-A-P
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Minimum Collector-emitter Breakdown Voltage: 80 V; No. of Elements: 1; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
FOD817A300
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Power Dissipation: .15 W; Maximum Response Time: .000018 s;
MOCD223R2M
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .15 W; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 2500 V;
MOCD207M
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 2; Maximum Isolation Voltage: 2500 V; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .06 A;
TLP292-4(GB
Toshiba's TLP292-4(GB) is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.05A, operating temp range from -55 to 125°C, and isolation voltage of 3750V. Ideal for applications requiring high isolation voltage and reliable signal transmission in harsh environments.
CNY173SM
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.65 V; Maximum Response Time: .000006 s; Minimum Collector-emitter Breakdown Voltage: 70 V;
TLP290(GB,SE
Toshiba's TLP290(GB,SE) optocoupler features AC input-transistor output with max. forward current of 0.05A and min. C-E breakdown voltage of 80V. Ideal for applications requiring high isolation voltage (3750V), such as industrial control systems and power supplies due to its surface mounting feature.
FOD852SD
FOD852SD by Onsemi is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.05A, min operating temperature of -30°C, and max isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio, low dark current, and fast response time in surface mount configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMHA2801R2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .05 A; No. of Elements: 1; Maximum Dark Current: 100 nA;
HMHA2801R2 by Onsemi is a single optocoupler transistor output with a max forward current of 0.05 A. It has a min operating temperature of -55°C and a max operating temperature of 100°C. This component is commonly used in applications requiring high isolation voltage and low power dissipation.
HMHA2801AR2V
HMHA2801AR2V by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C. With a collector-emitter breakdown voltage of 80V, it's ideal for applications requiring high isolation voltage up to 3750V in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Configuration: SINGLE; Maximum Forward Voltage: 1.3 V; Maximum Isolation Voltage: 3750 V;
HMHA2801A
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V;
HMHA2801AV
HMHA2801AV by Onsemi is a single configuration optocoupler transistor output with a max forward current of 0.05 A. It has a min operating temperature of -55°C and a max operating temperature of 100°C. This component is commonly used in applications requiring high isolation voltage and low power dissipation.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Maximum Power Dissipation: .15 W; No. of Elements: 1;
HMHA2801
The Onsemi HMHA2801 is a single optocoupler with max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. Featuring a transistor output and operating temperature range from -55°C to 100°C, it offers a min CTR of 80% and low dark current at 100nA.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 80 %; Maximum Operating Temperature: 100 Cel;
HMHA2801AR2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Maximum Isolation Voltage: 3750 V; No. of Elements: 1; JESD-609 Code: e3;
The Onsemi HMHA2801AR2 is a SINGLE Optocoupler Transistor Output with a Max Forward Current of 0.05A and Min C-E Breakdown Voltage of 80V. Ideal for applications requiring high isolation voltage up to 3750V, such as industrial control systems and power supplies.
HMHA2801C
The Onsemi HMHA2801C is a single optocoupler with a max forward current of 0.05A and collector-emitter breakdown voltage of 80V. With a nominal current transfer ratio of 50%, it offers isolation voltage up to 2500V. Ideal for applications requiring high-voltage isolation and signal transmission in temperature range from -55°C to 100°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; JESD-609 Code: e3; Maximum On State Current: .05 A;
HMHA281R2V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Forward Current: .05 A; Maximum Dark Current: 100 nA; Nominal Current Transfer Ratio: 50 %;
The Onsemi HMHA281R2V is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring transistor output optocouplers in surface mount configurations.
HMHAA280R2
The Onsemi HMHAA280R2 is a single optocoupler with AC input-transistor output. It has a max forward current of 0.05 A and operates b/w -55°C to 100°C. With an isolation voltage of 2500 V, it's ideal for applications requiring high voltage protection in surface mount configurations.
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Nominal Current Transfer Ratio: 50 %; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 2500 V; No. of Elements: 1;
HMHA281R2
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .05 A; Maximum Power Dissipation: .15 W; Additional Features: UL RECOGNIZED;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Nominal Current Transfer Ratio: 50 %; Minimum Collector-emitter Breakdown Voltage: 80 V; JESD-609 Code: e3;
HMHA2801CR4V
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.4 V; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .05 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved