Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP184 optocoupler features single configuration, 0.05A forward current, and 100% min. transfer ratio. Ideal for AC input-transistor output applications with -55 to 110°C operating temp range and 3750V isolation voltage in surface mount design.
Median Price
$0.212
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
TTI Europe
1+ parts
-
100+ parts
1k+ parts
$0.207
10k+ parts
Avnet
EBV Elektronik
Chip1Stop
$0.192
$0.145
Arrow
$0.217
$0.203
Verical
$0.220
$0.205
Nova Conductors
$0.310
TME
$0.438
NAC Semi
$0.782
$0.711
Vyrian
Ampacity Inc.
$0.112
Semicontronic
$0.109
Aztec Data Supply Inc.
$0.247
Corohmni
$0.277
Argo Parts USA
$0.301
$0.292
Continental Prestige Electronics
$0.295
Aranea Global
$0.304
Advanced Electronics
$0.316
Perfect Parts
Single configuration makes it easy to integrate into various electronic circuits without any additional complexity.
Capable of handling up to 0.05 A of current, ensuring reliable performance under normal operating conditions.
AC input-transistor output optocoupler design allows for efficient signal transmission and isolation between input and output circuits.
High maximum operating temperature of 110°C ensures stable performance even in challenging environments.
Low minimum operating temperature of -55°C allows for reliable operation in cold conditions.
Low power dissipation of 0.15 W helps in reducing heat generation and improving overall efficiency.
High minimum current transfer ratio of 100% ensures accurate signal transfer between input and output stages.
Low maximum dark current of 80 nA ensures minimal leakage current when the optocoupler is in the off state.
High minimum collector-emitter breakdown voltage of 80 V provides enhanced protection against voltage spikes.
High maximum isolation voltage of 3750 V ensures effective isolation between input and output circuits, enhancing safety.
Surface mount design allows for easy and secure mounting on PCBs, saving space and simplifying the assembly process.
Low maximum forward voltage of 1.4 V helps in reducing power consumption and improving overall efficiency.
Capable of handling up to 0.05 A of on-state current, ensuring reliable operation under normal load conditions.
Optocoupler Transistor Outputs TLP184(GB,SE(T attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Toshiba
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
TLP184(GB,SE(T Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Daco Semiconductor
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
SFH6186-3T
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN; Maximum Forward Current: .05 A; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel;
4N35
Marktech Optoelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .00001 s; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 3500 V;
4N35-X007T
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 30 V; Minimum Operating Temperature: -55 Cel;
TLP281(GB)
Toshiba
Toshiba's TLP281(GB) is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio.
OPI1264B
Tt Electronics Plc
OPI1264B by Tt Electronics Plc is a SINGLE optocoupler with a max forward current of 0.04 A and operating temperature range from -40 to 85°C. It features a min current transfer ratio of 50% and is ideal for applications requiring high isolation voltage up to 10kV, such as in industrial control systems.
SFH6156-4T
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Voltage: 1.65 V; Minimum Current Transfer Ratio: 56 %; Maximum Forward Current: .06 A; Maximum On State Current: .05 A;
TLP187
Toshiba's TLP187 is a single optocoupler with built-in diode and resistor, featuring a max forward current of 0.05A and Darlington output type. With an operating temperature range from -55°C to 110°C, it offers high isolation voltage of 3750V suitable for surface mount applications in various electronic circuits.
H11G1M
Fairchild Semiconductor
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 1000 %; JESD-609 Code: e3; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 7500 V;
GP2S700HCP
Sharp Corporation
Sharp Corporation's GP2S700HCP is a SINGLE optocoupler with max forward current of 0.05A and min operating temp of -25°C. Ideal for applications requiring transistor output optocouplers, with max collector-emitter breakdown voltage of 35V and gold terminal finish.
4N27
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -55 Cel; Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE; Maximum Forward Current: .06 A;
SFH6156-3T
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Nominal Current Transfer Ratio: 70 %; Minimum Collector-emitter Breakdown Voltage: 70 V; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A;
4N25
Ct Micro International
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5000 V; Additional Features: UL APPROVED, VDE APPROVED; Maximum Operating Temperature: 110 Cel; Configuration: SINGLE;
6N139
Morrihan International
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .1 W; Maximum Isolation Voltage: 2500 V; Maximum Forward Voltage: 1.7 V;
FODM8801AR2
FODM8801AR2 by Onsemi is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. It features a min CTR of 35%, operating temperature range from -40°C to 125°C, and surface mounting feature.
H11G1SR2VM
The Onsemi H11G1SR2VM is a single optocoupler with a Darlington output, ideal for applications requiring high isolation voltage of 7500V. It features a max forward current of 0.06A and min operating temperature of -40°C, making it suitable for use in various electronic circuits where reliable signal transmission is crucial. With a min current transfer ratio of 1000%, this surface-mount device offers efficient performance in demanding environments.
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; JESD-609 Code: e0; Maximum Isolation Voltage: 3550 V; Nominal Current Transfer Ratio: 100 %;
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 50 nA; Configuration: SINGLE; Maximum Forward Current: .08 A;
GP2S60
GP2S60 by Sharp Corp is a SINGLE optocoupler with max forward current of 0.05A, min operating temp of -25°C, and max operating temp of 85°C. It's used in applications requiring a transistor output optocoupler with gold terminal finish, low dark current (100nA), and high collector-emitter breakdown voltage (35V).
TLP291(GRH-TP,SE(T
Toshiba's TLP291(GRH-TP,SE(T optocoupler has a max forward current of 0.05A and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage (80V) and surface mounting feature. Operating temp ranges from -55 to 110°C, with a min current transfer ratio of 150%.
PS2811-1-F3-A-M
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); No. of Elements: 1; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP185(GB-TPL,SE(T
Toshiba's TLP185(GB-TPL,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temp range -55 to 110°C.
TLP185(GB-TPR,SE(T
Toshiba's TLP185(GB-TPR,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. With a max. isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
TLP187(TPL,E(T
Toshiba's TLP187(TPL,E(T optocoupler features a Darlington output with 0.05A forward current, 300V breakdown voltage, and 3750V isolation. Ideal for applications requiring high current transfer ratio, such as industrial automation systems and power control circuits. Operating temperature ranges from -55°C to 110°C ensure reliability in various environments.
TLP185(GR-TPL,SE(T
TLP185(GR-TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It has a min current transfer ratio of 100% and can operate in temperatures ranging from -55 to 110 °C. This surface mount device is commonly used for electrical isolation and signal transmission applications.
TLP185(GR,TPL,SE(T
TLP185(GR,TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. It is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
TLP185(GR-TPR,SE(T
Toshiba's TLP185(GR-TPR,SE(T optocoupler features a single transistor output with max forward current of 0.02A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting in temperature range -55 to 110°C.
TLP185(SE
Toshiba's TLP185(SE optocoupler features 0.05A max forward current, 80V min collector-emitter breakdown voltage, and 3750V max isolation voltage. Ideal for applications requiring high voltage protection in a compact surface mount configuration.
TLP185(BLL-TL,SE(T
Toshiba's TLP185(BLL-TL optocoupler features a max forward current of 0.05A, min operating temperature of -55°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP185(BL-TPL,SE(T
Toshiba's TLP185(BL-TPL,SE(T optocoupler features a max forward current of 0.05A and min operating temp of -55°C, ideal for single configuration applications. With a min current transfer ratio of 200%, it offers high isolation voltage of 3750V, making it suitable for surface mount setups requiring reliable transistor output optocouplers.
TLP184(GB-TPL,SE(T
Toshiba's TLP184(GB-TPL,SE(T) is a single optocoupler with AC input-transistor output. It offers a max forward current of 0.05A and min transfer ratio of 100%. With a max isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
TLP185(GB-TPL,SE
Toshiba's TLP185(GB-TPL,SE is a single configuration optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. This device is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
TLP185(GB-TPL,E(O
Toshiba's TLP185(GB-TPL,E(O optocoupler features a max forward current of 0.02A, operating temperature range from -55 to 110°C, and isolation voltage up to 3750V. Ideal for applications requiring high collector-emitter breakdown voltage and reliable signal transfer in single configuration setups.
TLP185(Y,SE
Toshiba's TLP185(Y,SE optocoupler features a single transistor output with max forward current of 0.05A and min transfer ratio of 50%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temperature range -55 to 110°C.
TLP185(GB,E(O
TLP185(GB,E(O by Toshiba is a single optocoupler transistor output with a max forward current of 0.02 A. It operates in temperatures ranging from -55 to 110 °C and has a min collector-emitter breakdown voltage of 80 V. This component is commonly used for electrical isolation and signal transmission applications.
TLP181(GB)
Toshiba's TLP181(GB) is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. With a min current transfer ratio of 100%, it operates b/w -55°C to 110°C, making it suitable for various surface mount configurations.
TLP181(GB-TPL,F)
Toshiba's TLP181(GB-TPL,F) optocoupler has a max forward current of 0.05A, isolation voltage of 3750V, and min transfer ratio of 100%. Ideal for surface mount applications, it operates b/w -55°C to 110°C, making it suitable for various electronic devices.
TLP187(TPL,E
Toshiba's TLP187(TPL,E is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.05A, Darlington output type, and 3750V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage, such as industrial automation systems.
TLP185(GBSE(T
Toshiba's TLP185(GBSE(T optocoupler has a max forward current of 0.02A, operating temp range of -55 to 110°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP185(GB,SE(T
Toshiba's TLP185(GB,SE(T optocoupler features a single transistor output with max. forward current of 0.02A and min. CTR of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as in power supplies and industrial control systems.
TLP185(SE(T
Toshiba's TLP185(SE(T optocoupler features 0.05A max forward current, 50% min current transfer ratio, and 3750V max isolation voltage. Ideal for applications requiring high voltage isolation in a compact surface mount configuration.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved