Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP185(GR-TPR,SE(T optocoupler features a single transistor output with max forward current of 0.02A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting in temperature range -55 to 110°C.
Median Price
$0.175
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
EBV Elektronik
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Chip1Stop
$0.146
$0.109
$0.096
Arrow
Verical
Element14
$0.330
$0.288
$0.258
Farnell
$0.315
$0.296
$0.277
TTI Europe
$0.140
RS (Exports)
$0.249
$0.239
$0.230
Nova Conductors
$0.181
NAC Semi
$0.310
J2 Sourcing AB
Vyrian
TME
$0.192
Martec Srl
ComSIT Distribution GmbH
Rutronik
$0.166
Bristol Electronics
Advanced Electronics
$0.093
$0.088
Argo Parts USA
$0.131
$0.127
Aranea Global
$0.177
$0.170
Modulus Dynamics
$0.183
$0.176
Semicontronic
$0.196
$0.191
$0.190
Continental Prestige Electronics
$0.507
$0.159
$0.130
Perfect Parts
Glotronic Ltd.
Authorized Procurement Solutions
iodParts Technologies Inc.
Allen Electronics Distributors
Robosynatics
$0.477
Lucentia Tech
Ability to handle a high forward current allows for reliable performance in various applications.
Transistor output optocoupler provides efficient signal transfer between input and output with minimal distortion.
Wide operating temperature range ensures stability and functionality in diverse environmental conditions.
High isolation voltage ensures safe operation and protection against voltage surges.
Relatively high breakdown voltage prevents damage to the device during operation.
Optocoupler Transistor Outputs TLP185(GR-TPR,SE(T attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Toshiba
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
TLP185(GR-TPR,SE(T Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Taitron Components
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Semiconductors
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
TLP291(GRH-TP,SE(T
Toshiba
Toshiba's TLP291(GRH-TP,SE(T optocoupler has a max forward current of 0.05A and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage (80V) and surface mounting feature. Operating temp ranges from -55 to 110°C, with a min current transfer ratio of 150%.
TLP185(GB-TPR,SE(T
Toshiba's TLP185(GB-TPR,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. With a max. isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
PS2801-1-A
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e6;
PS2801-1-F3-A-K
Renesas Electronics
PS2801-1-F3-A-K by Renesas Electronics is a SINGLE optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 2500V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and a nominal current transfer ratio of 300%.
TLP293-4(LGB,E
Toshiba TLP293-4(LGB,E is a 4-channel optocoupler with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature, operating in temp range -55 to 125°C.
4N35
Ct Micro International
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 80 V; Additional Features: UL APPROVED, VDE APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
4N25SR2VM
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 50 nA; Minimum Operating Temperature: -55 Cel; Minimum Collector-emitter Breakdown Voltage: 30 V; JESD-609 Code: e3;
FODM8801C
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Current Transfer Ratio: 100 %; Maximum Forward Current: .02 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
TLP292-4(GB,E
Toshiba's TLP292-4(GB,E is a 4-channel optocoupler with max. forward current of 0.05A, ideal for AC input-transistor output applications. With min. C-E breakdown voltage of 80V and isolation voltage of 3750V, it operates b/w -55°C to 125°C temperature range. Featuring surface mounting, it has a min. current transfer ratio of 100%.
TLP127
Toshiba's TLP127 is a single optocoupler with built-in diode and resistor, featuring a max forward current of 0.025A. With a Darlington output configuration, it offers high isolation voltage of 2500V, making it ideal for applications requiring reliable signal transmission in temperature range from -25 to 85°C.
PS2801-4-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 80 %; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Forward Current: .05 A; No. of Elements: 4;
4N25
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V; JESD-609 Code: e3; Maximum Forward Current: .1 A;
ILD213T
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Nominal Current Transfer Ratio: 100 %; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 50 nA; No. of Elements: 2;
CNY17-3
Lite-on Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Additional Features: UL APPROVED, VDE APPROVED;
TLP293-4(GB-TP,E
Toshiba's TLP293-4(GB-TP,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min current transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as in industrial control systems.
FODM2701
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 50 %; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 3750 V;
TLP187(TPR,E(T
Toshiba's TLP187(TPR,E(T optocoupler features Darlington output, 300V breakdown voltage, and 3750V isolation for high-power applications. With 0.05A forward current and -55 to 110°C operating range, it suits industrial control systems requiring reliable signal transmission. Its surface mount design and built-in diode make installation easy in compact spaces.
ACPL-217-50DE
Broadcom
ACPL-217-50DE by Broadcom is a SINGLE optocoupler with 0.05A forward current, 300% min transfer ratio, and 80V min breakdown voltage. Ideal for applications requiring high isolation voltage of 3000V in temperature range -55 to 110°C.
TCMD1000
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP185(GB-TPL,SE(T
Toshiba's TLP185(GB-TPL,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temp range -55 to 110°C.
TLP187(TPL,E(T
Toshiba's TLP187(TPL,E(T optocoupler features a Darlington output with 0.05A forward current, 300V breakdown voltage, and 3750V isolation. Ideal for applications requiring high current transfer ratio, such as industrial automation systems and power control circuits. Operating temperature ranges from -55°C to 110°C ensure reliability in various environments.
TLP185(GR-TPL,SE(T
TLP185(GR-TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It has a min current transfer ratio of 100% and can operate in temperatures ranging from -55 to 110 °C. This surface mount device is commonly used for electrical isolation and signal transmission applications.
TLP185(GR,TPL,SE(T
TLP185(GR,TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. It is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
TLP185(SE
Toshiba's TLP185(SE optocoupler features 0.05A max forward current, 80V min collector-emitter breakdown voltage, and 3750V max isolation voltage. Ideal for applications requiring high voltage protection in a compact surface mount configuration.
TLP185(BLL-TL,SE(T
Toshiba's TLP185(BLL-TL optocoupler features a max forward current of 0.05A, min operating temperature of -55°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP185(BL-TPL,SE(T
Toshiba's TLP185(BL-TPL,SE(T optocoupler features a max forward current of 0.05A and min operating temp of -55°C, ideal for single configuration applications. With a min current transfer ratio of 200%, it offers high isolation voltage of 3750V, making it suitable for surface mount setups requiring reliable transistor output optocouplers.
TLP184(GB-TPL,SE(T
Toshiba's TLP184(GB-TPL,SE(T) is a single optocoupler with AC input-transistor output. It offers a max forward current of 0.05A and min transfer ratio of 100%. With a max isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
TLP185(GB-TPL,SE
Toshiba's TLP185(GB-TPL,SE is a single configuration optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. This device is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
TLP185(GB-TPL,E(O
Toshiba's TLP185(GB-TPL,E(O optocoupler features a max forward current of 0.02A, operating temperature range from -55 to 110°C, and isolation voltage up to 3750V. Ideal for applications requiring high collector-emitter breakdown voltage and reliable signal transfer in single configuration setups.
TLP185(Y,SE
Toshiba's TLP185(Y,SE optocoupler features a single transistor output with max forward current of 0.05A and min transfer ratio of 50%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temperature range -55 to 110°C.
TLP185(GB,E(O
TLP185(GB,E(O by Toshiba is a single optocoupler transistor output with a max forward current of 0.02 A. It operates in temperatures ranging from -55 to 110 °C and has a min collector-emitter breakdown voltage of 80 V. This component is commonly used for electrical isolation and signal transmission applications.
TLP181(GB)
Toshiba's TLP181(GB) is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. With a min current transfer ratio of 100%, it operates b/w -55°C to 110°C, making it suitable for various surface mount configurations.
TLP181(GB-TPL,F)
Toshiba's TLP181(GB-TPL,F) optocoupler has a max forward current of 0.05A, isolation voltage of 3750V, and min transfer ratio of 100%. Ideal for surface mount applications, it operates b/w -55°C to 110°C, making it suitable for various electronic devices.
TLP187(TPL,E
Toshiba's TLP187(TPL,E is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.05A, Darlington output type, and 3750V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage, such as industrial automation systems.
TLP185(GBSE(T
Toshiba's TLP185(GBSE(T optocoupler has a max forward current of 0.02A, operating temp range of -55 to 110°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP185(GB,SE(T
Toshiba's TLP185(GB,SE(T optocoupler features a single transistor output with max. forward current of 0.02A and min. CTR of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as in power supplies and industrial control systems.
TLP185(SE(T
Toshiba's TLP185(SE(T optocoupler features 0.05A max forward current, 50% min current transfer ratio, and 3750V max isolation voltage. Ideal for applications requiring high voltage isolation in a compact surface mount configuration.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved