Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba TLP181(GR) is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. With a min C-E breakdown voltage of 80V and nominal current transfer ratio of 100%, it operates b/w -55°C to 110°C efficiently.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Dark Horse Electronics
LIBRA Elektronik GmbH
Nova Conductors
Corohmni
$0.189
Aztec Data Supply Inc.
$0.430
Ampacity Inc.
$2.100
Semicontronic
$2.048
$2.037
AZTECH Wire
$19.265
GreenTree Electronics
Kepictronics
Argo Parts USA
Perfect Parts
Continental Prestige Electronics
Robosynatics
Bastille Electronics
Single configuration simplifies the design and layout of the circuit, making it easy to implement and troubleshoot.
With a maximum forward current of 0.02 A, this optocoupler can handle small to moderate current loads, suitable for many applications.
Transistor output optocoupler provides high speed and low power consumption, making it ideal for applications requiring fast response times and efficiency.
High maximum operating temperature allows this optocoupler to be used in a wide range of environments without fear of overheating.
Low minimum operating temperature ensures reliable performance even in cold conditions.
Low power dissipation helps in reducing heat generation and improves the overall efficiency of the system.
A minimum current transfer ratio of 50% ensures sufficient signal amplification and reliable operation of the optocoupler.
Low dark current minimizes leakage current and improves the accuracy of the signal transmission.
High breakdown voltage ensures the safety and reliability of the optocoupler in high voltage applications.
A nominal current transfer ratio of 100% indicates accurate and consistent signal amplification.
High isolation voltage ensures electrical safety and protection against voltage spikes and surges.
Surface mount feature makes it easy to mount the optocoupler on PCBs, saving space and simplifying assembly.
Low forward voltage drop reduces power losses and improves the efficiency of the optocoupler.
With a maximum on-state current of 0.05 A, this optocoupler can handle moderate current loads with ease.
Optocoupler Transistor Outputs TLP181(GR) attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Toshiba
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
TLP181(GR) Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
Microchip Technology
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Shenzhen Socay Electronics
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
JANTX4N49U
Defense Logistics Agency
JANTX4N49U by Defense Logistics Agency is a SINGLE optocoupler with max forward current of 0.04A, operating temp range -55 to 125 °C. It features collector-emitter breakdown voltage of 40V, isolation voltage up to 1000V, and nominal current transfer ratio of 200%. Ideal for applications requiring high isolation and signal transfer in harsh environments.
4N25
Thomson Consumer Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .15 A; Maximum Isolation Voltage: 5000 V; Additional Features: UL RECOGNIZED;
MCT62S
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .15 W; Minimum Current Transfer Ratio: 100 %;
MOCD223R2M
MOCD223R2M by Onsemi is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.06A, Darlington output type, and 1000% nominal current transfer ratio. Ideal for applications requiring high isolation voltage up to 2500V, such as in industrial control systems and power supplies.
SFH6186-2T
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 55 V; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .05 A; Maximum Operating Temperature: 100 Cel;
TLP293-4(E(T
Toshiba
Toshiba's TLP293-4(E(T optocoupler features 4 separate channels with a max forward current of 0.05A. With a min transfer ratio of 50%, it offers high isolation voltage of 3750V, making it ideal for applications requiring reliable signal transmission in harsh environments.
CNY17-3M
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5000 V; Minimum Collector-emitter Breakdown Voltage: 80 V;
CNY17-3
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Maximum Power Dissipation: .15 W;
FOD817D3SD
FOD817D3SD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000V. With a fast response time of 18μs, it is suitable for surface mounting in various electronic circuits.
TLP293(TPL,E(T
Toshiba's TLP293(TPL,E(T optocoupler features single configuration, 0.05A max forward current, and 3750V isolation voltage. Ideal for applications requiring high isolation and low power dissipation in a compact surface mount package.
PS2801-1-F3-A-N
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL RECOGNIZED; Configuration: SINGLE; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 2500 V;
6N135
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 3500 V; Maximum Forward Current: .1 A; JESD-609 Code: e0;
MCT61
Qt Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SEPARATE, 2 CHANNELS; Maximum Dark Current: 100 nA; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .06 A;
TLP293(GRL-TPL,E
Toshiba's TLP293(GRL-TPL,E is a single optocoupler with max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a collector-emitter breakdown voltage of 80V and nominal current transfer ratio of 100%, it operates b/w -55°C to 125°C, making it suitable for various industrial and electronic control systems.
SFH6186-5
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .06 A; Nominal Current Transfer Ratio: 300 %; Maximum Isolation Voltage: 5300 V;
LTV-356T-TP1-B
The Lite-on Technology LTV-356T-TP1-B is a single optocoupler with a max forward current of 0.05A and operating temperature range from -55 to 110°C. With a min C-E breakdown voltage of 80V, it's ideal for applications requiring high isolation voltage up to 3750V, such as in power supplies or industrial control systems.
4N25M
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 20 %; Maximum Isolation Voltage: 7500 V;
MOCD207R2VM
The Onsemi MOCD207R2VM is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temperature range from -40 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high isolation and signal transfer in electronic circuits.
IL207AT
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -55 Cel; Maximum Dark Current: 50 nA;
LTV-357T
LTV-357T by Lite-on Technology is a single optocoupler with a max forward current of 0.05A and collector-emitter breakdown voltage of 35V. Ideal for applications requiring high isolation voltage (3750V) and fast response time (0.000018s), such as in industrial control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP185(GB-TPL,SE(T
Toshiba's TLP185(GB-TPL,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temp range -55 to 110°C.
TLP185(GB-TPR,SE(T
Toshiba's TLP185(GB-TPR,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. With a max. isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
TLP187(TPL,E(T
Toshiba's TLP187(TPL,E(T optocoupler features a Darlington output with 0.05A forward current, 300V breakdown voltage, and 3750V isolation. Ideal for applications requiring high current transfer ratio, such as industrial automation systems and power control circuits. Operating temperature ranges from -55°C to 110°C ensure reliability in various environments.
TLP185(GR-TPL,SE(T
TLP185(GR-TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It has a min current transfer ratio of 100% and can operate in temperatures ranging from -55 to 110 °C. This surface mount device is commonly used for electrical isolation and signal transmission applications.
TLP185(GR,TPL,SE(T
TLP185(GR,TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. It is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
TLP185(GR-TPR,SE(T
Toshiba's TLP185(GR-TPR,SE(T optocoupler features a single transistor output with max forward current of 0.02A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting in temperature range -55 to 110°C.
TLP185(SE
Toshiba's TLP185(SE optocoupler features 0.05A max forward current, 80V min collector-emitter breakdown voltage, and 3750V max isolation voltage. Ideal for applications requiring high voltage protection in a compact surface mount configuration.
TLP185(BLL-TL,SE(T
Toshiba's TLP185(BLL-TL optocoupler features a max forward current of 0.05A, min operating temperature of -55°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP185(BL-TPL,SE(T
Toshiba's TLP185(BL-TPL,SE(T optocoupler features a max forward current of 0.05A and min operating temp of -55°C, ideal for single configuration applications. With a min current transfer ratio of 200%, it offers high isolation voltage of 3750V, making it suitable for surface mount setups requiring reliable transistor output optocouplers.
TLP184(GB-TPL,SE(T
Toshiba's TLP184(GB-TPL,SE(T) is a single optocoupler with AC input-transistor output. It offers a max forward current of 0.05A and min transfer ratio of 100%. With a max isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
TLP185(GB-TPL,SE
Toshiba's TLP185(GB-TPL,SE is a single configuration optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. This device is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
TLP185(GB-TPL,E(O
Toshiba's TLP185(GB-TPL,E(O optocoupler features a max forward current of 0.02A, operating temperature range from -55 to 110°C, and isolation voltage up to 3750V. Ideal for applications requiring high collector-emitter breakdown voltage and reliable signal transfer in single configuration setups.
TLP185(Y,SE
Toshiba's TLP185(Y,SE optocoupler features a single transistor output with max forward current of 0.05A and min transfer ratio of 50%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temperature range -55 to 110°C.
TLP185(GB,E(O
TLP185(GB,E(O by Toshiba is a single optocoupler transistor output with a max forward current of 0.02 A. It operates in temperatures ranging from -55 to 110 °C and has a min collector-emitter breakdown voltage of 80 V. This component is commonly used for electrical isolation and signal transmission applications.
TLP181(GB)
Toshiba's TLP181(GB) is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. With a min current transfer ratio of 100%, it operates b/w -55°C to 110°C, making it suitable for various surface mount configurations.
TLP181(GB-TPL,F)
Toshiba's TLP181(GB-TPL,F) optocoupler has a max forward current of 0.05A, isolation voltage of 3750V, and min transfer ratio of 100%. Ideal for surface mount applications, it operates b/w -55°C to 110°C, making it suitable for various electronic devices.
TLP187(TPL,E
Toshiba's TLP187(TPL,E is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.05A, Darlington output type, and 3750V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage, such as industrial automation systems.
TLP185(GBSE(T
Toshiba's TLP185(GBSE(T optocoupler has a max forward current of 0.02A, operating temp range of -55 to 110°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP185(GB,SE(T
Toshiba's TLP185(GB,SE(T optocoupler features a single transistor output with max. forward current of 0.02A and min. CTR of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as in power supplies and industrial control systems.
TLP185(SE(T
Toshiba's TLP185(SE(T optocoupler features 0.05A max forward current, 50% min current transfer ratio, and 3750V max isolation voltage. Ideal for applications requiring high voltage isolation in a compact surface mount configuration.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved