Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: OPEN COLLECTOR, UL APPROVED, VDE APPROVED; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V; Packing Method: MAGAZINE;
Median Price
$2.440
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
-
1k+ parts
$1.119
10k+ parts
$0.983
QUARKTWIN TECHNOLOGY LTD
iodParts Technologies Inc.
Optocoupler Circuit Outputs TLP5774(D4,E attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Toshiba
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Nominal Response Time:
Minimum Supply Voltage:
TLP5774(D4,E Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Dev Marking Chg 1/Dec/2020
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Digitron Semiconductors
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Philips Components
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Continental Device India
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HCPL-0501#500
Broadcom
Broadcom's HCPL-0501#500 is a single optocoupler with logic IC output. It has a max forward current of 0.025A, isolation voltage of 3750V, and data rate of 1MBps. Ideal for applications requiring high-speed signal transmission in temperature range -55 to 100°C.
6N137S-TA1
Lite-on Technology
6N137S-TA1 by Lite-on Technology is a single optocoupler with max. forward current of 0.02 A, min. supply voltage of 2.7 V, and max. operating temp of 85°C. Ideal for logic IC output applications due to its fast response time (21 ns), high isolation voltage (5000 V), and data rate of 15 MBps in surface mount configuration.
6N137.SD
Fairchild Semiconductor
6N137.SD by Fairchild Semiconductor is a single optocoupler with a max forward current of 0.05 A and an isolation voltage of 2500 V. It operates b/w -40 to 85 °C, with a data rate of 10 MBps. Ideal for logic IC output applications requiring high isolation and fast data transmission.
HCPL2531SDM
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Maximum On State Current: .008 A; Maximum Isolation Voltage: 5000 V; Nominal Data Rate: 1 MBps;
ACPL-W21L-000E
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; JESD-609 Code: e3;
PS8101-F3-AX
Nec Electronics America
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: NICKEL PALLADIUM GOLD; Nominal Data Rate: 1 MBps; No. of Elements: 1; Maximum Isolation Voltage: 3750 V; Maximum On State Current: .008 A;
6N136S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; No. of Functions: 1; Maximum Power Dissipation: .1 W; No. of Elements: 1;
HCPL2731
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE;
HCPL0501V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Nominal Data Rate: 1 MBps;
HCPL-314J-500E
HCPL-314J-500E by Broadcom is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.025A and offers 5000V isolation voltage. Ideal for logic IC output applications, operating b/w -40°C to 100°C with a min supply voltage of 10V.
6N135
6N135 by Texas Instruments is a single optocoupler with max forward current of 0.025A, isolation voltage of 3000V, and data rate of 1MBps. It operates b/w 0-70°C, ideal for logic IC output applications requiring a min supply voltage of 5V.
HCPL-3120-500E
HCPL-3120-500E by Broadcom is a COMPLEX optocoupler with 0.016A forward current, 15V min supply voltage, and 100°C max operating temp. Ideal for logic IC output applications due to its 500ns response time, -40 to 100°C operating range, and high isolation voltage of 3750V.
TLP118(TPL,E(T
TLP118(TPL,E(T by Toshiba is a single optocoupler circuit output with a max forward current of 0.025 A. It is commonly used in logic IC output applications due to its fast nominal response time of 30 ns and high max isolation voltage of 3750 V.
HCPL2611M
HCPL2611M by Onsemi is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 5000V. With a nominal data rate of 10MBps, it is ideal for logic IC output applications requiring fast response times. Operating b/w -40 to 100°C, this rectangular-shaped optocoupler features through-hole mounting for easy installation.
6N139
Vishay Semiconductors
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Additional Features: TTL COMPATIBLE, UL APPROVED; Nominal Data Rate: .1 MBps;
6N138SM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Maximum Forward Current: .02 A; Maximum Operating Temperature: 100 Cel;
HCPL2731SDM
HCPL2731SDM by Onsemi is a 2-channel logic IC output optocoupler with separate configuration. It has a max forward current of 0.02A and isolation voltage of 5000V, suitable for surface mount applications in environments ranging from -40°C to 100°C.
6N137M
Everlight Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Shape: RECTANGULAR; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 85 Cel;
6N138
LOGIC IC OUTPUT OPTOCOUPLER; Nominal Data Rate: .1 MBps; No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Configuration: SINGLE; Additional Features: UL RECOGNIZED, CMOS COMPATIBLE;
HCPL0731R2
HCPL0731R2 by Onsemi is a 2-channel logic IC output optocoupler with separate configuration. It offers a min current transfer ratio of 400%, max isolation voltage of 2500V, and can handle a max forward current of 0.02A. Ideal for applications requiring surface mounting feature in temperature range -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP5214
Toshiba's TLP5214 is a linear IC output optocoupler with a min supply voltage of 15V and max forward current of 0.25A. With a response time of 32ns, it is ideal for applications requiring high-speed signal transmission in complex circuit configurations. Operating b/w -40°C to 110°C, it offers reliable performance in various electronic systems.
TLP5214A(D4,E(O
Toshiba's TLP5214A(D4,E(O is a logic IC output optocoupler with 0.025 A max forward current, 5000 V isolation voltage, and 32 ns response time. Ideal for complex circuit outputs in applications requiring high isolation voltages and fast response times at temperatures ranging from -40 to 110°C.
TLP5214(E(O
Toshiba's TLP5214(E(O optocoupler features 0.25A max forward current, 5000V isolation voltage, and 32ns response time. Ideal for linear IC output applications with a min supply voltage of 15V, operating temperature range from -40 to 110°C, and surface mounting feature.
TLP5231(D4-TP,E
Toshiba's TLP5231(D4-TP,E is a logic IC output optocoupler with max forward current of 0.025A, isolation voltage of 5000V, and response time of 200ns. Ideal for complex circuit outputs in applications requiring surface mounting, operating b/w -40 to 110°C with a supply voltage of at least 3.3V.
TLP5771H(TP,E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Supply Voltage: 10 V; Nominal Response Time: 56 ns; Maximum Forward Current: .008 A; Maximum Operating Temperature: 125 Cel;
TLP5214(TP,E
Toshiba's TLP5214(TP,E is a logic IC output optocoupler with max. forward current of 0.025A and isolation voltage of 5000V. Ideal for complex circuit outputs, it operates b/w -40°C to 110°C, with a response time of 32ns. Suitable for surface mount applications in various electronic devices.
TLP5771H(D4-TP,E
Toshiba's TLP5771H(D4-TP,E is a single optocoupler circuit output with a max forward current of 0.008 A. It operates at temperatures ranging from -40 to 125 °C and offers an isolation voltage of 5000 V. This component is commonly used in logic IC output applications and can be surface mounted for easy installation.
TLP5771H(E
Toshiba's TLP5771H(E optocoupler has a max forward current of 0.008A, isolation voltage of 5000V, and response time of 56ns. Ideal for logic IC output applications with a single configuration, it operates b/w -40 to 125°C and requires a min supply voltage of 10V.
TLP559
LOGIC IC OUTPUT OPTOCOUPLER; Maximum On State Current: .008 A; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; TTL COMPATIBLE; No. of Functions: 1;
TLP5771H(D4,E
Toshiba's TLP5771H(D4,E) is a single optocoupler circuit output with a max forward current of 0.008 A. It operates at temperatures ranging from -40 to 125 °C and has a nominal response time of 56 ns. This surface mount device offers an isolation voltage of up to 5000 V, making it suitable for various applications requiring logic IC output optocouplers.
TLP5231
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Response Time: .0000003 s; Minimum Supply Voltage: 3.3 V; Nominal Response Time: 200 ns; Additional Features: UL RECOGNIZED;
TLP559(IGM)
Toshiba's TLP559(IGM) is a single optocoupler circuit output with a max forward current of 0.025 A. It is commonly used as a logic IC output optocoupler in applications requiring isolation voltage up to 2500 V and operating temperatures ranging from -55°C to 100°C.
TLP559(IGM,F)
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Pure Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel;
TLP5701(TP,E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Minimum Supply Voltage: 10 V; No. of Elements: 1; Maximum Isolation Voltage: 5000 V;
TLP5212(D4-TP,E
LOGIC IC OUTPUT OPTOCOUPLER;
TLP5212(E
TLP5212(TP,E
TLP5754(TP,E
Toshiba's TLP5754(TP,E is a single optocoupler with max forward current of 0.02A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w -40 to 110°C with response time as fast as 15ns. Suitable for surface mounting method in various electronic circuits.
TLP5214(D4,E
LINEAR IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; No. of Functions: 1; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Forward Current: .25 A;
TLP5754(D4-TP,E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Maximum Forward Current: .02 A; Maximum Response Time: .00000015 s;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved