Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP5771H(D4-TP,E is a single optocoupler circuit output with a max forward current of 0.008 A. It operates at temperatures ranging from -40 to 125 °C and offers an isolation voltage of 5000 V. This component is commonly used in logic IC output applications and can be surface mounted for easy installation.
Median Price
$2.380
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.330
1k+ parts
$1.050
10k+ parts
$0.940
DigiKey
$1.321
$1.147
$0.969
Nova Conductors
$1.091
-
Vyrian
Aztec Data Supply Inc.
$0.140
Corohmni
$0.573
Continental Prestige Electronics
$1.069
Argo Parts USA
Semicontronic
$2.020
$1.970
$1.959
QUARKTWIN TECHNOLOGY LTD
This single configuration allows for easy integration into any circuit design, making it a versatile choice for optocoupler applications.
With one function, this optocoupler circuit output simplifies circuit design, reducing complexity and improving efficiency.
The high maximum forward current ensures that this optocoupler can handle heavy loads, making it suitable for a wide range of applications.
As a logic IC output optocoupler, this product provides reliable and accurate logic-level signaling, making it ideal for digital communication circuits.
With a relatively low minimum supply voltage, this optocoupler can operate effectively in a variety of power supply configurations.
The high maximum operating temperature allows this optocoupler to withstand challenging environments, ensuring its durability and reliability.
The fast nominal response time enables quick and efficient signal transmission, making this optocoupler suitable for high-speed applications.
With a low minimum operating temperature, this optocoupler can function reliably in cold environments, expanding its potential usage scenarios.
The presence of a single element simplifies installation and reduces the complexity of optocoupler circuit setups, enhancing usability.
The TR packing method protects the optocoupler during transportation and storage, ensuring that it arrives in optimal condition.
The high maximum isolation voltage provides excellent electrical protection and safety, making this optocoupler suitable for numerous high-voltage applications.
The surface mounting feature simplifies installation and allows for compact circuit designs, making this optocoupler a space-saving choice.
Optocoupler Circuit Outputs TLP5771H(D4-TP,E attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Toshiba
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Nominal Response Time:
Minimum Supply Voltage:
TLP5771H(D4-TP,E Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Sensitron Semiconductor
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Hy Electronic
6N139SDM
6N139SDM by Onsemi is a single optocoupler with max forward current of 0.02A and min transfer ratio of 400%. Ideal for logic IC output applications, it operates b/w -40 to 100°C, offers isolation voltage of 5000V, and has a surface mount feature.
HCPL-0601-500E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Elements: 1; Maximum On State Current: .05 A; Maximum Operating Temperature: 85 Cel;
6N137
Nec Electronics America
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; Maximum On State Current: .05 A; No. of Elements: 1;
HCPL2531
The Texas Instruments HCPL2531 is a logic IC output optocoupler with 2 separate channels. It has a max isolation voltage of 3000V and a data rate of 1MBps. Ideal for applications requiring high-speed signal isolation in temperatures ranging from 0 to 70°C.
OPI1268
Tt Electronics Plc
OPI1268 by Tt Electronics Plc is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 16kV. It operates b/w -40°C to 100°C, making it suitable for logic IC output applications at data rates up to 2MBps. This rectangular-shaped component has through-hole mounting and can handle a max on-state current of 0.025A.
HCPL-063A
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .01 A; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .05 A;
HCPL-3101-000E
LOGIC IC OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Operating Temperature: 80 Cel; Maximum On State Current: .1 A; Maximum Forward Current: .02 A; Minimum Supply Voltage: 15 V;
HCPL-2231-000E
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Nominal Response Time: 300 ns; Maximum Forward Current: .005 A; No. of Elements: 2;
6N135
NXP Semiconductors
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum On State Current: .01 A; Maximum Forward Current: .1 A; Maximum Operating Temperature: 100 Cel;
HCPL2530
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Isolation Voltage: 2500 V; Maximum Response Time: .0000015 s; Maximum Operating Temperature: 85 Cel;
HCPL2630
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; No. of Functions: 2; Configuration: SEPARATE, 2 CHANNELS; No. of Elements: 2;
HCPL-0501-560E
Broadcom
HCPL-0501-560E by Broadcom is a single optocoupler with 0.025A forward current, 15% min transfer ratio, and 3750V isolation voltage. Ideal for logic IC output applications, it operates b/w -55 to 100 °C with a data rate of 1 MBps in surface mount configuration.
6N139
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Maximum Isolation Voltage: 2500 V;
6N136-V
Everlight Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -55 Cel; Maximum On State Current: .025 A; No. of Elements: 1; Configuration: SINGLE;
LOC111PTR
Littelfuse
LINEAR IC OUTPUT OPTOCOUPLER;
HCPL2601
General Instrument Optoelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 70 Cel; Maximum Forward Current: .02 A; Nominal Response Time: 20 ns; Minimum Operating Temperature: 0 Cel;
6N139SM
Isocom Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; JESD-609 Code: e3;
MID400SDM
The Onsemi MID400SDM is a single optocoupler with logic IC output. It offers 5000V isolation voltage, -40 to 85°C operating temperature range, and 1000000ns response time. Ideal for surface mount applications in various electronic circuits requiring high voltage isolation.
FODM452R2V
The Onsemi FODM452R2V is a single optocoupler with a max forward current of 0.025A and isolation voltage of 3750V. It operates b/w -40 to 85°C, suitable for logic IC output applications at up to 1MBps data rate in surface mount configurations.
HCPL2601WV
HCPL2601WV by Onsemi is a single optocoupler with 0.05A forward current, 75ns response time, and 2500V isolation voltage. Ideal for logic IC output applications, it operates b/w -40 to 85°C temperatures with a max power dissipation of 0.085W.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP5214
Toshiba
Toshiba's TLP5214 is a linear IC output optocoupler with a min supply voltage of 15V and max forward current of 0.25A. With a response time of 32ns, it is ideal for applications requiring high-speed signal transmission in complex circuit configurations. Operating b/w -40°C to 110°C, it offers reliable performance in various electronic systems.
TLP5214A(D4,E(O
Toshiba's TLP5214A(D4,E(O is a logic IC output optocoupler with 0.025 A max forward current, 5000 V isolation voltage, and 32 ns response time. Ideal for complex circuit outputs in applications requiring high isolation voltages and fast response times at temperatures ranging from -40 to 110°C.
TLP5214(E(O
Toshiba's TLP5214(E(O optocoupler features 0.25A max forward current, 5000V isolation voltage, and 32ns response time. Ideal for linear IC output applications with a min supply voltage of 15V, operating temperature range from -40 to 110°C, and surface mounting feature.
TLP5231(D4-TP,E
Toshiba's TLP5231(D4-TP,E is a logic IC output optocoupler with max forward current of 0.025A, isolation voltage of 5000V, and response time of 200ns. Ideal for complex circuit outputs in applications requiring surface mounting, operating b/w -40 to 110°C with a supply voltage of at least 3.3V.
TLP5771H(TP,E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Supply Voltage: 10 V; Nominal Response Time: 56 ns; Maximum Forward Current: .008 A; Maximum Operating Temperature: 125 Cel;
TLP5214(TP,E
Toshiba's TLP5214(TP,E is a logic IC output optocoupler with max. forward current of 0.025A and isolation voltage of 5000V. Ideal for complex circuit outputs, it operates b/w -40°C to 110°C, with a response time of 32ns. Suitable for surface mount applications in various electronic devices.
TLP5771H(E
Toshiba's TLP5771H(E optocoupler has a max forward current of 0.008A, isolation voltage of 5000V, and response time of 56ns. Ideal for logic IC output applications with a single configuration, it operates b/w -40 to 125°C and requires a min supply voltage of 10V.
TLP559
LOGIC IC OUTPUT OPTOCOUPLER; Maximum On State Current: .008 A; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; TTL COMPATIBLE; No. of Functions: 1;
TLP5771H(D4,E
Toshiba's TLP5771H(D4,E) is a single optocoupler circuit output with a max forward current of 0.008 A. It operates at temperatures ranging from -40 to 125 °C and has a nominal response time of 56 ns. This surface mount device offers an isolation voltage of up to 5000 V, making it suitable for various applications requiring logic IC output optocouplers.
TLP5231
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Response Time: .0000003 s; Minimum Supply Voltage: 3.3 V; Nominal Response Time: 200 ns; Additional Features: UL RECOGNIZED;
TLP559(IGM)
Toshiba's TLP559(IGM) is a single optocoupler circuit output with a max forward current of 0.025 A. It is commonly used as a logic IC output optocoupler in applications requiring isolation voltage up to 2500 V and operating temperatures ranging from -55°C to 100°C.
TLP559(IGM,F)
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Pure Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel;
TLP5701(TP,E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Minimum Supply Voltage: 10 V; No. of Elements: 1; Maximum Isolation Voltage: 5000 V;
TLP5212(D4-TP,E
LOGIC IC OUTPUT OPTOCOUPLER;
TLP5212(E
TLP5212(TP,E
TLP5754(TP,E
Toshiba's TLP5754(TP,E is a single optocoupler with max forward current of 0.02A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w -40 to 110°C with response time as fast as 15ns. Suitable for surface mounting method in various electronic circuits.
TLP5214(D4,E
LINEAR IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; No. of Functions: 1; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Forward Current: .25 A;
TLP5754(D4-TP,E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Maximum Forward Current: .02 A; Maximum Response Time: .00000015 s;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved