Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ULN2003V12DR by Texas Instruments is a 7-bit peripheral driver with inverted output polarity and sink current flow direction. It operates b/w -40 to 125°C, has a nominal voltage of 50V, and offers transient protection. Ideal for applications requiring buffer or inverter-based interface ICs in compact designs.
Median Price
$0.428
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.300
100+ parts
$0.237
1k+ parts
$0.192
10k+ parts
-
Texas Instruments
$0.431
$0.293
$0.150
Mouser Electronics
$1.170
$0.480
$0.337
$0.241
Newark
$1.210
$0.493
$0.346
Element14
$1.560
$0.642
$0.452
$0.353
DigiKey
$0.263
Farnell
$0.367
$0.258
$0.201
Chip1Stop
$0.425
$0.279
$0.203
Verical
$0.319
Freelance Electronics
$0.164
Nova Conductors
$0.255
Digiode
$0.285
Maritex
$0.617
$0.326
$0.250
Vyrian
Chip Stock
Prism Electronics
Ampacity Inc.
$0.185
Semicontronic
$0.180
$0.179
Argo Parts USA
$0.247
Corphita
$0.270
Modulus Dynamics
$0.283
$0.280
$0.272
Continental Prestige Electronics
$0.528
$0.355
$0.238
Parana Technologies
$4.488
$4.926
DigiPath Technology Company
$4.942
ChromeModa Solutions
$5.043
$4.135
IDEA Electronic Components Group
$4.539
Corohmni
$9.035
Advanced Electronics
$17.685
$16.093
$14.502
Perfect Parts
Kepictronics
Computer Components Inc. - USA
Authorized Procurement Solutions
A-Z Elektronik GmbH
Lixinc
iodParts Technologies Inc.
$0.342
Robosynatics
Lucentia Tech
$1.322
The use of plastic/epoxy material in the package body makes the product durable and lightweight.
Being surface mountable allows for easy and efficient installation on circuit boards.
The built-in transient protection ensures reliable operation and safeguards the product against voltage spikes or fluctuations.
Having 16 terminals allows for versatile connectivity options and compatibility with various systems.
With a high maximum operating temperature, the product can withstand demanding environmental conditions.
The open-collector output characteristics provide flexibility in interfacing with different types of external devices.
The bipolar technology used in the product ensures reliable performance and precise control.
The nominal output peak current limit of 1 A allows for safe operation without risking damage to connected devices.
Peripheral Drivers ULN2003V12DR attributes and parameters. Explore more Peripheral Drivers devices from Texas Instruments
Built-in Protections:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
ULN2003V12DR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - ULN2003V12 DataSheet Update 16/Feb/2017
PCN Assembly/Origin - LBC7 Wafer Chg 15/Oct/2018
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Continental Device India
Surge Components
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
Renesas Electronics
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TPIC6B595DWR
TPIC6B595DWR by Texas Instruments is a register-based peripheral driver with 8 channels and open-drain output. It operates b/w -40 to 125 °C, with a supply voltage range of 4.5-5.5 V. Ideal for automotive applications due to built-in transient protection and small outline package style.
TBD62783AFNG,EL
Toshiba
Toshiba's TBD62783AFNG,EL is a peripheral driver with 8 functions and a max supply voltage of 50V. It has a small outline package style and is suitable for industrial applications.
VND7050AJTR
STMicroelectronics
VND7050AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w 4-28 V, has turn-on/off times of 120/100 us, and is ideal for interface IC applications requiring sink output current flow direction.
ISO8200BQ
ISO8200BQ by STMicroelectronics is a peripheral driver with 32 terminals, operating voltage range of 2.75V to 36V, and built-in protections for transient, over current, and over voltage. It has a max output current of 1.3A and is suitable for automotive applications due to its temperature grade and compact size.
VN330SP-E
STMicroelectronics VN330SP-E is a 4-function peripheral driver with built-in protections. It operates at supply voltages b/w 10-36V, suitable for automotive applications. With a max output current of 0.5A and turn-on/off times of 60/40us, it offers reliable performance in compact dimensions (9.4x7.5x3.75mm).
VNH7100AS-E
HALF BRIDGE BASED PERIPHERAL DRIVER;
DS2482X-101+T
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: RECTANGULAR;
NCV8450ASTT3G
NCV8450ASTT3G by Onsemi is a peripheral driver with a max supply voltage of 45V, built-in protections for transient, over current, and over voltage. It has a turn-on time of 125us and turn-off time of 175us. This IC type buffer or inverter based driver is ideal for automotive applications requiring high reliability under harsh conditions.
FSFR2100
Fairchild Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR;
BSP77E6433HUMA1
Infineon Technologies
BSP77E6433HUMA1 by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates at an industrial temperature grade range from -40 to 85°C, with a nominal voltage of 12V and output peak current limit of 2.8A. This rectangular-shaped device in small outline package is suitable for applications requiring sink output current flow direction.
BSP75N
BSP75N by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12/24V power supplies with a max output current of 1A. This small outline package is ideal for automotive applications requiring sink output current flow direction.
VN340SP13TR
STMicroelectronics' VN340SP13TR is a 4-function peripheral driver with built-in protections for over current, thermal, and under voltage. It operates at a nominal voltage of 24V and has a max supply voltage of 36V. With a turn-on time of 100us and turn-off time of 50us, it is ideal for applications requiring fast response times in automotive electronics.
BTS141TCBUMA1
BTS141TCBUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.
TBD62083AFG
Toshiba's TBD62083AFG is an 8-bit buffer/inverter peripheral driver with a max output current of 0.4A, suitable for industrial applications. It operates b/w -40 to 85°C, with built-in transient protection and a terminal pitch of 1.27mm in a small outline package style.
BTS428L2
BTS428L2 by Infineon is a MOS technology-based peripheral driver with built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 4.75V to 41V, making it suitable for automotive applications requiring a max output current of 5.8A in a compact small outline package style.
BTS3408GXT
BTS3408GXT by Infineon is a peripheral driver with 60V max supply voltage, built-in protections, and 0.55A nominal output peak current limit. It is used as a buffer or inverter-based peripheral driver in various applications requiring sink output current flow direction. The small outline package style makes it suitable for compact designs with its 1.75mm max seated height and dual terminal position.
TPS22965QWDSGTQ1
TPS22965QWDSGTQ1 by Texas Instruments is a small outline, heat sink package with built-in transient protection. It operates b/w -40 to 125 °C and supports a supply voltage range of 2.5V to 5.5V, making it ideal for automotive applications requiring source and sink current flow control.
FPF2702MX
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BTS555E3146HKSA1
BTS555E3146HKSA1 by Infineon is a 5-terminal peripheral driver with max supply voltage of 34V. It offers built-in protections for transient, over current, and over voltage. Ideal for applications requiring a nominal output peak current limit of 520A and a turn-on time of 600µs.
DS2482S-100/T&R
DS2482S-100/T&R by Maxim Integrated is a peripheral driver with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.9V to 5.5V and is ideal for industrial applications requiring buffer or inverter-based interface ICs in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Youtai Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
ULN2003ADR2G
ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;
ULN2803AN
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
Motorola
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: .5 A; No. of Functions: 1;
ULN2003D1013TR
STMicroelectronics ULN2003D1013TR is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring fast turn-on/off times in a small outline package.
ULN2803CDWR
ULN2803CDWR by Texas Instruments is an 8-function peripheral driver with open-collector output characteristics. It has built-in transient protections and a nominal output peak current limit of 0.5A, making it ideal for applications requiring sink current flow direction such as motor control systems.
ULN-2003A
ULN-2003A by Sprague Electric is a 7-bit bipolar peripheral driver with a max output current of 0.35 A and nominal voltage of 50 V. It features a rectangular plastic/epoxy package, dual terminal position, and operates in temperatures ranging from 0 to 70°C. Ideal for driving various loads in commercial applications.
ULN2003A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;
Allegro MicroSystems
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -20 Cel;
Diodes Incorporated
Sgs-ates Componenti Electronici S P A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved