Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TPD2E001IDRLRQ1 by Texas Instruments is a single transient suppression device with a max operating temperature of 85°C. It features a min breakdown voltage of 11V and max clamping voltage of 25V, making it ideal for protecting sensitive electronics from voltage spikes in automotive applications.
Median Price
$0.298
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$0.316
100+ parts
$0.215
1k+ parts
$0.110
10k+ parts
-
Arrow
$0.435
$0.228
Mouser Electronics
$0.930
$0.375
$0.259
$0.211
DigiKey
$0.279
Chip1Stop
$0.190
$0.182
Verical
Digiode
$0.205
Nova Conductors
$0.256
Maritex
$0.646
$0.403
$0.270
Vyrian
ComSIT Distribution GmbH
Rebound Electronics
Parana Technologies
$0.125
$1.475
DigiPath Technology Company
$0.137
$0.126
ChromeModa Solutions
$0.140
$0.115
IDEA Electronic Components Group
Semicontronic
$0.147
$0.143
Ampacity Inc.
Corphita
$0.194
Aranea Global
$0.251
$0.241
Continental Prestige Electronics
Argo Parts USA
$0.248
Corohmni
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Lixinc
A-Z Elektronik GmbH
Technoshack Inc. (Excess)
Formix International (Excess)
GreenTree Electronics
Provides durability and protection for the internal components of the device, ensuring long-lasting performance.
Low reverse current ensures minimal power loss and efficient operation of the device.
Higher breakdown voltage helps in protecting sensitive electronic components from overvoltage conditions.
Ability to withstand high temperatures during reflow soldering process, ensuring reliable solder joints.
Specifically designed for transient voltage suppression, providing reliable protection against voltage spikes and surges.
Transient Suppression Devices TPD2E001IDRLRQ1 attributes and parameters. Explore more Transient Suppression Devices devices from Texas Instruments
Additional Features:
Minimum Breakdown Voltage:
Maximum Clamping Voltage:
Config:
Diode Element Material:
Diode Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity:
Qualification:
Reference Standard:
Maximum Repetitive Peak Reverse Voltage:
Maximum Reverse Current:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
TPD2E001IDRLRQ1 Diodes trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.10.00.80
SB
PCN Packaging - Packing material change 08/Jun/2020
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
5KP33CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: NO; Maximum Clamping Voltage: 53.3 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 38.65 V; Maximum Repetitive Peak Reverse Voltage: 33 V;
1.5SMC400CA
Wayon Electronics
SMAJ12CA
Sangdest Microelectronics (Nanjing)
SMBJ36CA
Shenzhen Socay Electronics
SMBJ30CA
Dc Components
SMBJ5.0A
Alpha & Omega Semiconductor
SMBJ24A
Meritek Electronics
SMBJ30A
World Products
Multicomp Pro
Lite-on Semiconductor
P6KE51A
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
5KP33A
Promax-johnton
P6KE24A
Littelfuse
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: NO; Moisture Sensitivity Level (MSL): 1; Nominal Breakdown Voltage: 38.7 V; Peak Reflow Temperature (C): 260; Maximum Clamping Voltage: 53.3 V;
SMBJ12CA
P6KE200A
New England Semiconductor
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPD2E001DRLR
TPD2E001DRLR by Texas Instruments is a single transient suppression device with a max clamping voltage of 25V. It operates in temperatures ranging from -40 to 85°C and has a min breakdown voltage of 11V. Ideal for protecting electronic circuits from voltage spikes in various applications.
TPD2E007DCKR
TPD2E007DCKR by Texas Instruments is a single avalanche diode with bidirectional polarity. It has a breakdown voltage of 14V and max clamping voltage of 14V, making it ideal for transient suppression in applications requiring protection against voltage spikes. With a small outline package style and gull wing terminal form, this device operates b/w -40°C to 85°C, meeting IEC-61000-4-2, 4-5 standards.
TPD2E001DRLRG4
TPD2E001DRLRG4 by Texas Instruments is a single transient suppression device with a max clamping voltage of 25V. It features a unidirectional diode element made of silicon, suitable for applications requiring protection against voltage transients. With a small outline package style and dual terminal position, it operates b/w -40°C to 85°C as per IEC-61000-4-2 standards.
TPD2E001DZDR
TPD2E001DZDR by Texas Instruments is a single transient suppression device with a max clamping voltage of 25V. It features a unidirectional diode element made of silicon, suitable for applications requiring protection against voltage transients. With a small outline package style and dual terminal position, it operates b/w -40°C to 85°C according to IEC-61000-4-2 standards.
TPD2E009DRTR
TPD2E009DRTR by Texas Instruments is a single transient suppression device with a max clamping voltage of 8V. It features a diode type of TVS diode and operates in temperatures ranging from -40°C to 85°C. Ideal for applications requiring protection against voltage transients in electronic circuits.
TPD2E2U06DRLR
TPD2E2U06DRLR by Texas Instruments is a single transient suppression device with 85W power dissipation. It features a max breakdown voltage of 8.5V, ideal for protecting sensitive electronics from voltage spikes in applications like industrial control systems and communication equipment.
TPD2E001DRYR
TPD2E001DRYR by Texas Instruments is a single transient suppression device with a max clamping voltage of 25V. It features a unidirectional diode element made of silicon, suitable for applications requiring protection against voltage transients. With an operating temperature range from -40 to 85°C, it meets the IEC-61000-4-2 standard for ESD protection.
TPD2E009DBZR
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TPD2S017DBVR
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 6; Surface Mount: YES; Package Shape: RECTANGULAR;
TPD2E2U06DRLR-P
TPD2E2U06DRLR-P by Texas Instruments is a single transient suppression device with 85W power dissipation. It operates in temperatures from -40 to 125°C, with breakdown voltage of 6.5-8.5V. Ideal for protecting electronic circuits from voltage spikes in various applications.
TPD2E001DRYRG4
TPD2E001DRYRG4 by Texas Instruments is a single-config, surface mount transient suppression device with a max clamping voltage of 25V. It has a min breakdown voltage of 11V and operates in temperatures ranging from -40 to 85°C. This diode is commonly used for protecting electronic circuits against electrostatic discharge (ESD) events.
TPD2E001DRSR
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: NO LEAD; No. of Terminals: 6; Surface Mount: YES; Package Shape: SQUARE;
TPD2E001DRST-NM
TPD2E001DRST-NM by Texas Instruments is a single transient suppression device with a breakdown voltage of 11V. It features a max clamping voltage of 25V and operates b/w -40 to 85°C. Ideal for protecting sensitive electronics from voltage transients in various applications.
TPD2E2U06DCKR
TPD2E2U06DCKR by Texas Instruments is a single avalanche diode with 75W power dissipation, 7.5V breakdown voltage, and 0.01uA max reverse current. It is used for transient suppression in applications requiring protection against voltage spikes and surges.
TPD2E2U06QDCKRQ1
TPD2E2U06QDCKRQ1 by Texas Instruments is a single, surface mount transient suppression device with a max non-repetitive peak reverse power dissipation of 75W. It has a min breakdown voltage of 6.5V and is used for protecting electronic circuits from voltage spikes in applications such as automotive systems and industrial equipment.
TPD2E2U06QDBZRQ1
TPD2E2U06QDBZRQ1 by Texas Instruments is a single transient suppression device with a max clamping voltage of 9.7V, ideal for protecting sensitive electronics from voltage spikes. Its avalanche diode technology ensures reliable performance with a breakdown voltage range of 6.5-8.5V, meeting IEC standards for ESD protection in various applications. This small outline package with gull wing terminals operates b/w -40 to 125°C, making it suitable for diverse environments requiring robust overvoltage protection.
TPD2E009DRYR
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: NO LEAD; No. of Terminals: 6; Surface Mount: YES; Package Shape: RECTANGULAR;
TPD2E007YFMRG4
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: BOTTOM; Terminal Form: NO LEAD; No. of Terminals: 4; Surface Mount: YES; Package Shape: SQUARE;
TPD2E1B06DRLR
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: NO LEAD; Surface Mount: YES; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved