Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TL034CDR by Texas Instruments is a BIFET operational amplifier with a max input offset voltage of 4000 uV and a min slew rate of 1.5 V/us. It is commonly used in applications requiring low-bias current, such as precision instrumentation and audio amplification.
Median Price
$1.226
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.290
100+ parts
$1.066
1k+ parts
$0.576
10k+ parts
-
Mouser Electronics
$2.040
$1.230
$1.100
$1.010
Rochester
$1.120
$0.930
$0.829
DigiKey
$1.400
Verical
$1.162
$1.036
RS (Exports)
$1.056
Digiode
$0.760
Nova Conductors
$0.839
TME
$1.360
$0.990
$0.890
Forefront Electronics and Design
$7.350
DigiKey Marketplace
$0.830
Vyrian
Chip Stock
IBS Electronics
$0.773
Semicontronic
$0.680
$0.663
$0.660
Ampacity Inc.
Corphita
$0.720
Aranea Global
$0.822
$0.789
Continental Prestige Electronics
Argo Parts USA
Corohmni
$2.378
Parana Technologies
$2.701
$3.182
DigiPath Technology Company
$2.974
ChromeModa Solutions
$3.035
$2.489
IDEA Electronic Components Group
$2.732
Lixinc
A-Z Elektronik GmbH
Kepictronics
Assy Fe
This product's package body material is made of plastic/epoxy, providing durability and resistance to external elements, making it a reliable choice for various applications.
With a maximum input offset voltage of 4000 uV, this operational amplifier offers precise signal amplification with minimal deviation, ensuring accurate output representation.
The maximum average bias current of 0.0004 uA indicates that this op amp operates at low power consumption levels, making it suitable for battery-powered devices or applications with limited power resources.
This op amp is surface mountable, simplifying the PCB assembly process and enhancing space utilization, making it an efficient choice for compact designs.
With four functions integrated into a single package, this op amp provides versatility and reduces the need for additional components, saving valuable board space and cost.
The rectangular package shape facilitates easy mounting and soldering on the PCB, ensuring a stable and secure connection, making it a convenient choice for manufacturing processes.
This op amp offers a high common mode reject ratio of 94 dB, effectively attenuating noise and interference, leading to improved signal integrity and accurate output representation.
The nominal supply voltage of 5V provides compatibility with standard power supply sources, facilitating easy integration into various electronic systems.
With power supply voltage ranges of ±5V and ±15V, this op amp supports a wide range of voltage inputs, accommodating diverse application requirements.
With 14 terminals, this op amp offers multiple input and output options, empowering complex circuit designs and enabling versatile signal routing.
With a maximum input offset current of 0.0001 uA, this op amp minimizes the input bias current effect, ensuring accurate and stable amplification.
The small outline package style promotes efficient spatial utilization on the PCB, enabling the integration of multiple op amps in compact designs while minimizing interference.
This op amp exhibits a minimum slew rate of 1.5V/μs, allowing the amplifier to quickly respond to changes in input signals, ensuring faithful reproduction of fast-changing signals.
With a maximum supply voltage limit of 18V, this op amp can handle higher voltage inputs, making it suitable for applications that require high voltage amplification.
The maximum operating temperature of 70°C ensures stable performance and reliability even in demanding thermal conditions, making it suitable for industrial and automotive applications.
This op amp's maximum bias current of 0.0002 uA ensures precise amplification with minimal current-induced deviations, enabling accurate signal processing.
With frequency compensation, this op amp mitigates phase shift and instability issues, ensuring stability and fidelity in amplifying a wide range of input frequencies.
The minimum voltage gain of 5000 allows for high signal amplification, enabling weak input signals to be boosted for optimal processing and analysis.
The minimum operating temperature of 0°C guarantees reliable performance even in cold environments, making it suitable for a wide range of operating conditions.
The nickel palladium gold terminal finish ensures excellent conductivity and corrosion resistance, ensuring reliable electrical connections, even in harsh environments or with repeated use.
With a dual terminal position, this op amp provides flexibility for different circuit configurations, accommodating diverse system designs and installation requirements.
The maximum seated height of 1.75mm ensures compatibility with compact designs, optimizing space utilization and facilitating integration into miniaturized electronic systems.
With a width of 3.9mm, this op amp offers a compact footprint, enabling dense PCB layouts and saving valuable space in space-constrained applications.
This op amp operates in micropower mode, consuming low power while delivering efficient and reliable amplification, making it ideal for power-sensitive applications.
With a maximum time of 30 seconds at peak reflow temperature, this op amp allows for efficient and reliable soldering during assembly processes.
With a peak reflow temperature of 260°C, this op amp can withstand high-temperature soldering processes, ensuring robust solder joints and reliable connections.
The 8.65mm length of this op amp offers a compact and space-efficient form factor, allowing for easy integration into various designs and minimizing PCB footprint.
This op amp is classified under the commercial temperature grade, guaranteeing reliable performance within standard operating temperature ranges, suitable for general-purpose applications.
With a low-bias specification, this op amp exhibits minimal bias current, reducing voltage offsets and ensuring accurate signal amplification, making it suitable for precision measurement applications.
This op amp supports negative voltage inputs down to -18V, expanding its applicability to circuits that require amplification of both positive and negative signals.
With a nominal unity gain bandwidth of 1100 kHz, this op amp can faithfully reproduce signals within this frequency range, ensuring accurate and reliable amplification.
The minimum common mode reject ratio of 75 dB indicates enhanced noise rejection capability, resulting in a cleaner output signal and improved signal accuracy.
Built on the BIFET (Bipolar Field Effect Transistor) technology, this op amp combines the advantages of both bipolar and FET technologies, offering low noise, high input impedance, and robust performance.
The gull wing terminal form simplifies surface mount assembly, allowing for efficient and reliable soldering processes, facilitating mass production and reducing manufacturing costs.
This product is an operational amplifier, specifically designed for high-gain and precision signal amplification, making it an ideal choice for various signal processing and conditioning applications.
With a maximum supply current of 1.12 mA, this op amp operates efficiently, consuming minimal power while delivering reliable amplification, suitable for power-constrained applications.
The nominal negative supply voltage of -5V enables the op amp to accommodate both positive and negative voltage inputs, widening the application scope.
Built with a voltage-feedback architecture, this op amp provides high linearity and stability, ensuring accurate amplification across a wide range of input signals.
This op amp is packed in tape and reel (TR) format, facilitating automated assembly processes and reducing material handling, enhancing production efficiency and reducing costs.
The nominal slow rate of 2.9V/μs indicates the amplifier's ability to accurately amplify slowly varying input signals with minimal distortion, ensuring faithful signal reproduction.
With a terminal pitch of 1.27mm, this op amp is compatible with standard PCB layouts, simplifying the design and assembly processes while ensuring reliable connectivity.
With a moisture sensitivity level of 1, this op amp is highly resistant to moisture-induced damage during storage and assembly, ensuring long-term reliability and performance consistency.
Operational Amplifiers (Op Amps) TL034CDR attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Texas Instruments
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Maximum Input Offset Current (IIO):
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
TL034CDR Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - Mult Dev 14/Jul/2023
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Kec
Diodes Incorporated
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
OP07CP+
OP07CP+ by Maxim Integrated is a voltage-feedback operational amplifier with a max input offset voltage of 250 uV, a max average bias current of 0.009 uA, and a nominal common mode reject ratio of 120 dB. It is commonly used in applications requiring low-offset amplification and precise signal conditioning.
LM2904N
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TL084CD
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LM2904MX/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358DRG3
LM358DRG3 by Texas Instruments is a dual operational amplifier with 80dB CMRR and 700kHz unity gain bandwidth. It operates on +-1.5/+-16/3/32V supplies, ideal for commercial applications requiring low bias current and high voltage gain in a small outline package.
LM358MX/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA2134UA/2K5
OPA2134UA/2K5 by Texas Instruments is a dual operational amplifier with 2000uV max input offset voltage, 100dB nominal CMRR, and 15V nominal voltage. Ideal for industrial applications requiring low-bias current and high slew rate performance in a compact package.
AD8495ARMZ-R7
Analog Devices
AD8495ARMZ-R7 by Analog Devices is an operational amplifier with a max supply voltage of 18V and bias current of 0.05uA. It is designed for automotive applications, featuring a small outline package with dual terminals and matte tin finish for surface mounting.
LM324NSR
LM324NSR by Texas Instruments is a quad operational amplifier with 4 functions. It features low bias current (-0.5 uA) and micropower technology, suitable for applications requiring high voltage gain (15k) and frequency compensation (1200 kHz). Ideal for commercial-grade projects needing precise voltage feedback in a compact package.
LM324AM
LM324AM by Texas Instruments is a quad operational amplifier with 14 terminals. It features a max input offset voltage of 5000 uV, bias current of 0.2 uA, and common mode reject ratio of 85 dB. Widely used in applications requiring micropower amplification with a supply voltage range of 5-30 V.
LM2904D-T
Philips Semiconductors
LM324N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
ADA4084-2ARMZ-R7
ADA4084-2ARMZ-R7 by Analog Devices is a dual operational amplifier with low-offset voltage of 250 uV and max bias current of 0.45 uA. It operates at a supply voltage of +-5 V, making it suitable for automotive applications. With a unity gain bandwidth of 15900 kHz, this op amp is ideal for precision signal processing in compact designs.
OPA1662AIDGKRQ1
OPA1662AIDGKRQ1 by Texas Instruments is a dual operational amplifier with 100dB CMRR and 22000kHz unity gain bandwidth. It has a max input offset voltage of 1500uV, making it ideal for industrial applications requiring precise signal amplification in harsh environments. With a compact square package and low bias current of 1.2uA, this op amp is suitable for automotive electronics where space and power efficiency are crucial.
TL074CD
LM741H/883
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Supply Voltage / Vsup (V): 15;
INA133UA/2K5
INA133UA/2K5 by Texas Instruments is an operational amplifier with 450uV max input offset voltage, 90dB CMRR, and 1.5MHz bandwidth. Ideal for industrial applications requiring low-offset amplification in a compact package.
INA117KU/2K5
INA117KU/2K5 by Texas Instruments is an operational amplifier with 1000uV max input offset voltage, 75dB common mode reject ratio, and 2V/us min slew rate. Ideal for industrial applications requiring precise signal amplification in a compact package.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
OPA2209AIDGKR
OPA2209AIDGKR by Texas Instruments is a dual operational amplifier with low offset voltage of 150uV and bias current of 0.015uA. Ideal for automotive applications, it offers high common mode rejection ratio of 130dB and unity gain bandwidth of 18MHz in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TL032CDR
TL032CDR by Texas Instruments is a dual operational amplifier with low-bias and micropower features. It offers a min slew rate of 1.5 V/us, nominal unity gain bandwidth of 1100 kHz, and max input offset voltage of 1500 uV. Ideal for applications requiring precise signal amplification in commercial temperature environments.
TL034CDRE4
TL034CDRG4
TL032CDRG4
TL032CDRE4
TL032IDR
TL032CD
TL032CD by Texas Instruments is an Operational Amplifier with 2 functions, featuring a Max Input Offset Voltage of 1500 uV and Nominal Common Mode Reject Ratio of 94 dB. Ideal for applications requiring low-bias current amplification in commercial temperature environments.
TL034IDRG4
TL034IDRG4 by Texas Instruments is a micropower operational amplifier with 4 functions. It features a min slew rate of 1 V/us and nominal common mode reject ratio of 94 dB. Ideal for industrial applications requiring low-bias amplification in compact designs.
TL032AIDRG4
TL034CD
TL034CD by Texas Instruments is a BIFET technology operational amplifier with 4 functions, low-bias, and micropower features. It has a max input offset voltage of 4000 uV, operates at temperatures from 0 to 70 °C, and offers a nominal unity gain bandwidth of 1100 kHz. Ideal for applications requiring precise signal amplification in commercial-grade environments.
TL034IDR
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
TL032CDE4
TL032CDG4
TL032AIDR
TL032AIDRE4
TL034AIDR
TL034AIDR by Texas Instruments is a micropower operational amplifier with 4 functions. It features a max input offset voltage of 1500 uV, min slew rate of 1.5 V/us, and nominal common mode reject ratio of 94 dB. Ideal for industrial applications requiring low-bias amplification in compact designs.
TL034CDE4
TL034CDG4
TL034CDG4 by Texas Instruments is a BIFET operational amplifier with 8200uV max input offset voltage, 1.5V/us min slew rate, and 87dB nominal CMRR. Ideal for applications requiring low-bias current amplification in commercial temperature grades.
TL031AMP
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved