Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TISP4082F3D by Texas Instruments is a single silicon surge protector with 4A peak current, 66V DC voltage, and 82V breakdown voltage. Ideal for protecting electronic circuits in harsh environments. Operates b/w -40°C to 150°C, UL recognized for reliability.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
One Stop Electronics
$2.100
Parana Technologies
$2.354
$2.853
ChromeModa Solutions
$2.645
$2.169
IDEA Electronic Components Group
$2.380
Semicontronic
$8.100
$7.898
$7.857
AZTECH Wire
$9.540
Corphita
DigiPath Technology Company
$2.385
Corohmni
The use of plastic/epoxy material makes the surge protector lightweight and durable, ideal for various applications.
The single configuration simplifies installation and maintenance of the surge protector.
The high on-state current rating allows the surge protector to handle sudden surges effectively, providing reliable protection to connected devices.
The surface mount capability ensures easy integration of the surge protector on circuit boards, saving space and reducing assembly time.
The rectangular shape of the package allows for efficient placement on PCBs and enhances the overall aesthetics of the product.
The gull wing terminal form provides secure solder connections and facilitates automated assembly processes.
The surge protector has 8 terminals, allowing for easy connectivity and ensuring a stable electrical connection.
The small outline package style saves space on the PCB, making it suitable for compact electronic devices.
The surge protector can handle high off-state voltages, offering protection against overvoltage events.
With a high maximum operating temperature, the surge protector can function reliably in various environmental conditions.
Utilizing silicon surge protection technology ensures effective suppression of transient voltage spikes, safeguarding connected equipment.
The surge protector can operate in cold environments without compromising its performance, making it suitable for a wide range of applications.
The dual terminal position provides flexibility in wiring options, allowing for versatile installation configurations.
The surge protector's high holding current capability ensures continuous protection against voltage surges without tripping prematurely.
The surge protector's high breakdown voltage rating offers robust protection against overvoltage conditions, increasing the longevity of connected devices.
Being UL recognized ensures that the surge protector meets stringent safety and performance standards, guaranteeing reliable operation.
Silicon Surge Protectors TISP4082F3D attributes and parameters. Explore more Silicon Surge Protectors devices from Texas Instruments
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JESD-30 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
TISP4082F3D Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
SPC TECHNOLOGY/ MULTICOMP
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Onsemi
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Weitronic Enterprise
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
TISP3180F3DR
TISP3180F3DR by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 145V DC Off-state Voltage, and 180V Breakdown Voltage. It is used for surge protection in various applications like telecommunications equipment and industrial electronics due to its THYRISTOR technology.
TISP83121D
TISP83121D by Texas Instruments is a Silicon Surge Protector with 200mA DC Gate Trigger Current, 22A Non Repetitive Peak On-state Current, and 1.8V Max DC Gate Trigger Voltage. Ideal for protecting electronic circuits from voltage surges in applications requiring surge protection like telecommunications equipment.
TISP4265M3LPR
TISP4265M3LPR by Texas Instruments is a single thyristor surge protector with 30A non-repetitive peak on-state current and 265V max breakdown voltage. It features a plastic/epoxy package body, round shape, and wire terminals. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4082F3SL
Bourns
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
TISP4265H4BJR
TISP4265H4BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 265V and trigger device type as thyristor surge protector. Ideal for protecting electronic devices from voltage surges in various applications.
NP1800SET3G
NP1800SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 220V. Ideal for protecting electronic devices from power surges in various applications.
ST4
Semitronics
SILICON SURGE PROTECTOR; Surface Mount: NO; Repetitive Peak Reverse Voltage: 9 V; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Maximum Breakdown Voltage: 18 V;
SZHBL5006XV2T1G
SILICON SURGE PROTECTOR; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
TISP7380F3SL
TISP7380F3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 7.1A and a max DC off-state voltage of 270V. Ideal for applications requiring protection against surges, it features a thyristor surge protector trigger device type and is UL recognized.
TISP2180F3P
TISP2180F3P by Texas Instruments is a silicon surge protector with 3 elements in delta configuration. It has a max breakdown voltage of 180V and non-repetitive peak on-state current of 6A. Ideal for protecting electronic devices from voltage surges, it features UL recognized reference standard and through-hole terminal form.
NP3100SDMCT3G
NP3100SDMCT3G by Onsemi is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max DC off-state voltage of 275V and operates b/w -40 to 150 °C. Ideal for applications requiring protection against surges in electronic circuits.
TISP4125F3D
TISP4125F3D by Texas Instruments is a single silicon surge protector with 4A peak current, 100V max voltage, and 150°C operating temp. Ideal for protecting circuits in electronics from voltage spikes. Surface mountable with UL recognition, it has dual terminals and Gull Wing form factor.
SMPTA320
STMicroelectronics
SMPTA320 by STMicroelectronics is a single silicon surge protector designed for surface mounting. It features a max DC off-state voltage of 290 V, non-repetitive peak on-state current of 16 A, and operates b/w -55 °C to 150°C. Ideal for protecting sensitive electronics from voltage spikes.
TISP4180M3LMFR
TISP4180M3LMFR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 32A. It operates b/w -40°C to 150°C, featuring a max breakdown voltage of 180V. Ideal for applications requiring reliable overvoltage protection such as telecommunications and industrial equipment.
TISP2290L
TISP2290L by Texas Instruments is a silicon surge protector with 3 elements in delta configuration. It has a max breakdown voltage of 290V and can handle non-repetitive peak on-state current of 10A. This device, with through-hole terminals, is ideal for protecting electronic circuits from voltage surges.
TISP4260F3D
TISP4260F3D by Texas Instruments is a single silicon surge protector with 4A peak current, 200V DC voltage, and 150°C max temp. Ideal for protecting circuits in various applications like telecommunications and industrial electronics due to its UL recognized standards and gull wing terminals.
SMP100LC-90
SMP100LC-90 by STMicroelectronics is a single silicon surge protector designed for surface mount applications. It features a non-repetitive peak on-state current of 24 A, a repetitive peak reverse voltage of 90 V, and operates b/w -55 °C to 150°C. Ideal for protecting sensitive electronics from voltage spikes.
NP2100SBT3G
NP2100SBT3G by Onsemi is a silicon surge protector with a max DC off-state voltage of 180V and max breakdown voltage of 240V. It is a thyristor surge protector suitable for applications requiring protection against electrical surges. With a small outline package style, it operates in temperatures ranging from -40 °C to 150°C.
NP1300SCT3G
NP1300SCT3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 120V and trigger device type as thyristor. It has a max operating temperature of 150 °C and is ideal for applications requiring UL recognized surge protection in compact designs.
TPA100B-18
STMicroelectronics TPA100B-18 is a single silicon surge protector with 30A non-repetitive peak on-state current. It features a plastic/epoxy package, matte tin terminal finish, and 121V max breakdown voltage. Ideal for surge protection applications in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TISP4240M3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
TISP4400T3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
TISP4P020L1NR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
TISP4015L1AJR-S
Bourns TISP4015L1AJR-S is a single silicon surge protector with 22A peak current, ideal for surface mount applications. Featuring 8V DC off-state voltage and 15V breakdown voltage, it offers protection against transient surges. With UL recognition, this thyristor surge protector in a small outline package is suitable for various electronic devices.
TISP4070M3AJR-S
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Form: C BEND;
TISP4070M3AJR
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
Power Innovations
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 70 V;
TISP4070M3BJR-S
Bourns TISP4070M3BJR-S is a single silicon surge protector with 32A peak current, ideal for protecting circuits. With a max breakdown voltage of 70V and operating temperature range from -40 to 150°C, it ensures reliable performance. This surface-mount device in small outline package suits various applications requiring transient voltage suppression.
TISP4015L1BJR-S
TISP4015L1BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 22A. It features a max DC off-state voltage of 8V and a breakdown voltage of 15V, making it ideal for protecting sensitive electronics from power surges. This surface-mount device in a small outline package is UL recognized and commonly used in applications requiring reliable overvoltage protection.
TISP4070H3BJR-S
Bourns TISP4070H3BJR-S is a single silicon surge protector with 60A peak current, 58V max voltage, and -40 to 150°C operating range. Ideal for protecting circuits from transient overvoltage events in various applications.
TISP4040H1BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: MATTE TIN;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Breakdown Voltage: 82 V;
TISP4250J3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Reference Standard: UL RECOGNIZED;
TISP4265M3BJR-S
TISP4265M3BJR-S by Bourns is a single silicon surge protector with a max DC off-state voltage of 200V. It has a non-repetitive peak on-state current of 32A and operates b/w -40°C to 150°C. Ideal for protecting electronic circuits from transient overvoltage events in various applications.
TISP4395J3BJR-S
TISP4350H3BJR-S
TISP2082F3D
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: DELTA CONNECTED, 3 ELEMENTS; Maximum Breakdown Voltage: 82 V;
TISP1082F3P
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved