Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LMX2485E by Texas Instruments is a PLL frequency synthesizer with 24 terminals, operating voltage range of 2.5V to 3.6V, and temperature range of -40°C to 85°C. It comes in a square chip carrier package suitable for industrial applications requiring precise frequency synthesis and phase-locked loops.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
One Stop Electronics
$4.500
Parana Technologies
$8.194
$8.803
DigiPath Technology Company
$9.023
$8.301
ChromeModa Solutions
$9.207
$7.550
IDEA Electronic Components Group
$8.747
$8.286
AZTECH Wire
$15.635
Corphita
This material provides good durability and protection for the components inside, ensuring a longer lifespan for the product.
Surface mount technology allows for easy and efficient assembly processes, saving time and cost in production.
Operating at a low voltage of 3V helps reduce power consumption, making this product more energy-efficient.
Having 24 terminals allows for more connectivity options and flexibility in the design of electronic circuits.
With a high maximum operating temperature of 85°C, this product can withstand tough environmental conditions without compromising performance.
The wide range of operating temperatures from -40°C to 85°C makes this product suitable for use in various environments, both hot and cold.
Quad terminal position provides stable and secure connections, reducing the chances of signal interference or loss.
With a low maximum seated height of 0.8mm, this product is compact and can be easily integrated into smaller electronic devices.
The small width of 4mm allows for space-saving installation, ideal for applications where size constraints are a concern.
Being a PLL frequency synthesizer, this product offers precise and stable frequency generation capabilities, essential for many communication and signal processing applications.
Designed for industrial use, this product meets the reliability and performance standards required for harsh industrial environments.
No lead terminals are environmentally friendly and also provide better electrical performance compared to traditional leaded components.
A fine terminal pitch of 0.5mm allows for high-density mounting, enabling more components to be packed into a smaller space.
Operating within a safe voltage range of up to 3.6V ensures the longevity and reliability of the product by preventing overvoltage damage.
Phase Locked Loops (PLL) & Frequency Synthesis Circuits LMX2485E attributes and parameters. Explore more Phase Locked Loops (PLL) & Frequency Synthesis Circuits devices from Texas Instruments
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LMX2485E Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Bytesonic Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TLC2932AIPWR
Texas Instruments
TLC2932AIPWR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 5V supply, 55 GHz output frequency, and 14 terminals. It operates in -20 to 75°C range, suitable for commercial applications requiring high-frequency signal generation in compact designs. The IC's CMOS technology and small form factor make it ideal for space-constrained systems needing precise frequency control.
UC1635L
The Texas Instruments UC1635L is a PLL frequency synthesizer with 20 terminals, operating voltage of 8-15V. It features a ceramic/metal-sealed co-fired package, suitable for military-grade applications. With a temperature range of -55 to 125°C, it offers precise frequency synthesis in compact chip carrier form.
TRF2052PWR
TRF2052PWR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 20 terminals, operating at -10 to 55°C. It has a supply voltage of 3V and BICMOS technology. Ideal for applications requiring small outline packages and surface mount compatibility.
SN74LV4046ADR
SN74LV4046ADR by Texas Instruments is a Phase Locked Loop (PLL) IC with 16 terminals, operating at supply voltages of 3.3/5V. It features a CMOS technology, industrial temperature grade, and is suitable for frequency synthesis circuits in various applications.
LMX2331ATM
LMX2331ATM by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating b/w -40 to 85°C. It features a supply voltage range of 2.7V to 5.5V and utilizes BICMOS technology. This device is commonly used in applications requiring precise frequency synthesis in industrial settings.
ADF4355-2BCPZ
Analog Devices
Analog Devices' ADF4355-2BCPZ is a 32-terminal PLL & Frequency Synthesis Circuit with 3.3V supply voltage, operating from -40 to 85°C. Ideal for industrial applications, it features BICMOS technology, matte tin finish, and compact square package at 0.8mm height.
LTC6947IUFD#TRPBF
LTC6947IUFD#TRPBF by Analog Devices is a PLL Frequency Synthesizer with 28 terminals, operating at 3.3V. It has a wide temperature range from -40 to 105°C and low supply current of 1500mA. Ideal for industrial applications requiring precise frequency synthesis in compact designs.
LMX2331USLEX
LMX2331USLEX by Texas Instruments is a PLL frequency synthesizer with 24 terminals, operating at 3V and 3.8mA. It has a temperature range of -40 to 85°C, suitable for industrial applications requiring precise frequency synthesis in compact form factor. The chip carrier package with a very thin profile makes it ideal for surface mount designs.
CD4046BCN
PHASE LOCKED LOOP; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD74HC4046ANSRG4
CD74HC4046ANSRG4 by Texas Instruments is a Phase Locked Loop (PLL) IC with 16 terminals, operating voltage range of 2-6V, and temperature range of -55 to 125°C. It is ideal for frequency synthesis circuits in military-grade applications due to its CMOS technology and small outline package design.
LMX2330LSLDX
LMX2330LSLDX by Texas Instruments is a PLL frequency synthesizer with 20 terminals in a chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial applications. It has a max supply current of 6.6mA and operates on power supplies of 3/5V, making it ideal for various frequency synthesis circuits.
LMX2525LQ1321
LMX2525LQ1321 by Texas Instruments is a PLL frequency synthesizer with 24 terminals, operating voltage of 2.5-3.3V, and package style of chip carrier. It has a max supply current of 16.8mA and operates in temperatures ranging from -30 to 85°C. Ideal for applications requiring precise frequency synthesis in compact designs.
LTC6946IUFD-1#PBF
LTC6946IUFD-1#PBF by Analog Devices is a PLL frequency synthesizer with 28 terminals and a supply voltage range of 3.15V to 3.45V. It features a CMOS technology, matte tin terminal finish, and very thin profile chip carrier package style. Ideal for applications requiring precise frequency synthesis in compact electronic designs.
LMX2491RTWT
LMX2491RTWT by Texas Instruments is a PLL frequency synthesizer with a max output frequency of 6400 GHz. Operating at temperatures from -40 to 85 °C, it features a 24-terminal chip carrier package suitable for industrial applications. With a supply voltage range of 3.15V to 3.45V, this surface-mount device is ideal for high-frequency circuit designs.
TRF376115IRHAT
PLL or Frequency Synthesis Circuits;
TRF3761-CIRHAR
TRF3761-CIRHAR by Texas Instruments is a PLL frequency synthesizer with 40 terminals, operating at -40 to 85°C. It has a supply voltage range of 4.5V to 5.25V and peak reflow temperature of 260°C. Ideal for industrial applications requiring precise frequency synthesis in compact form factor.
ADF4356BCPZ
ADF4356BCPZ by Analog Devices is a PLL frequency synthesizer with a nominal voltage of 3.3V. It operates in an industrial temperature range of -40 to 85°C and has a compact square package shape, making it suitable for various applications requiring precise frequency synthesis.
ADF4159CCPZ
Analog Devices' ADF4159CCPZ is a PLL & Frequency Synthesis Circuit with 24 terminals, operating at -40 to 125°C. It features 1.8-3.3V power supplies, BICMOS technology, and matte tin finish. Ideal for automotive applications due to its square chip carrier package style and no-lead terminal form.
LMX2433TM
LMX2433TM by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating b/w -40 to 85°C. It features a supply voltage range of 2.25V to 2.75V and comes in a small outline package suitable for industrial applications requiring precise frequency synthesis circuits.
LMX9402BL1501X
LMX9402BL1501X by Texas Instruments is a PLL frequency synthesizer with 25 terminals, operating voltage of 4.75-5.5V, and BICMOS technology. It features a ceramic/metal-sealed co-fired package suitable for surface mount applications in various electronic devices. With a temperature range of -10 to 85°C, it offers precise frequency synthesis capabilities for communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMX2594RHAT
LMX2594RHAT by Texas Instruments is a PLL & Frequency Synthesis Circuit with a max output frequency of 15 GHz. It operates at a nominal voltage of 3.3V and has an industrial temperature grade. This IC is commonly used in applications requiring precise frequency synthesis and phase-locked loop functionality.
LMX2594RHAR
LMX2594RHAR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 15000 GHz output frequency, suitable for industrial applications. It operates at 3.3V nominal voltage and has a package style of CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE. With a temperature range from -40 to 85 °C, it offers high performance in various electronic systems.
LMX2595RHAT
LMX2595RHAT by Texas Instruments is a PLL & Frequency Synthesis Circuit with 19000 GHz output frequency, 40 terminals, and 3.3V nominal voltage. It is used in industrial applications for high-frequency signal generation in compact spaces due to its small form factor and surface-mount capability.
LMX2572RHAT
LMX2572RHAT by Texas Instruments is a PLL & Frequency Synthesis Circuit with 6400 GHz output frequency, suitable for industrial applications. It operates at temperatures ranging from -40 to 85 °C and has a supply voltage of 3-3.5 V. The package style is chip carrier with a very thin profile, making it ideal for space-constrained designs.
LMX2595RHAR
LMX2595RHAR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 19000 GHz output frequency, 40 terminals, and 3.3V nominal voltage. It is used in industrial applications requiring precise frequency synthesis and phase-locked loop functionality.
LMX2572RHAR
LMX2572RHAR by Texas Instruments is a PLL & Frequency Synthesis Circuit with a max output frequency of 6400 GHz. It operates at a nominal voltage of 3.3 V and has an industrial temperature grade. This IC is commonly used in applications requiring phase-locked loops for frequency synthesis.
LMX2592RHAT
PHASE LOCKED LOOP; Temperature Grade: INDUSTRIAL; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LMX2820RTCT
LMX2820RTCT by Texas Instruments is a PLL frequency synthesizer with a max output frequency of 22.6 GHz. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage range of 3.15V to 3.45V, making it suitable for various wireless communication applications. The package style is chip carrier with very thin profile, ideal for space-constrained designs.
LMX2820RTCR
LMX2820RTCR by Texas Instruments is a PLL frequency synthesizer with a max output frequency of 22.6 GHz. It operates at a nominal voltage of 3.3V and has an industrial temperature grade. This IC is commonly used in applications requiring precise frequency synthesis and phase-locked loops.
LMX2572LPRHAT
LMX2572LPRHAT by Texas Instruments is a PLL & Frequency Synthesis Circuit with 2000 GHz output frequency, suitable for industrial applications. It operates at -40 to 85 °C, with a supply voltage range of 3-3.5 V. This chip carrier has 40 terminals in a square shape, ideal for surface mount assembly.
LMX2592RHAR
LMX2592RHAR by Texas Instruments is a PLL & Frequency Synthesis Circuit with a max output frequency of 9800 GHz. It operates at a nominal voltage of 3.3 V and has an industrial temperature grade. This IC type is commonly used in applications requiring phase-locked loops for frequency synthesis.
LMX2582RHAT
LMX2582RHAT by Texas Instruments is a PLL & Frequency Synthesis Circuit with 5500 GHz output frequency, 40 terminals, and 3.3V nominal voltage. Ideal for industrial applications requiring high-frequency precision in a compact chip carrier package.
LMX2582RHAR
LMX2582RHAR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 5500 GHz output frequency, 40 terminals, and 3.3V nominal voltage. It is used in industrial applications requiring precise frequency control and operates b/w -40 to 85 °C temperatures.
LMX2572LPRHAR
LMX2572LPRHAR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 2000 GHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 3-3.5 V. The chip carrier package style with very thin profile makes it ideal for compact designs requiring high-frequency precision.
LMX2531LQX2820E/NOPB
LMX2531LQX2820E/NOPB by Texas Instruments is a PLL frequency synthesizer with 36 terminals in a chip carrier package. Operating at temperatures from -40 to 85°C, it has a supply voltage of 3V and max current of 52mA. Ideal for industrial applications requiring precise frequency synthesis in compact designs.
National Semiconductor
PLL or Frequency Synthesis Circuits; Temperature Grade: INDUSTRIAL; No. of Terminals: 36; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
LMX2581SQE/NOPB
PHASE LOCKED LOOP; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LMX2485ESQ/NOPB
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LMX2485ESQ/NOPB by Texas Instruments is a PLL frequency synthesizer with a max output frequency of 3000 GHz. Operating at a nominal voltage of 3 V, it features a CMOS technology and is ideal for industrial applications requiring precise frequency synthesis in compact designs. With surface mount capability and a square package shape, this IC offers reliable performance in temperature ranges from -40 to 85 °C.
LMX2531LQ2570E/NOPB
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved