Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DRV104PWP by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. This small outline, heat sink package is ideal for industrial applications requiring a max output current of 1.2A in a compact form factor.
Median Price
$8.485
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$8.480
100+ parts
$5.603
1k+ parts
$5.154
10k+ parts
$5.033
Mouser Electronics
$8.490
$5.570
$5.170
$5.030
Nova Conductors
$3.003
-
Digiode
$4.655
Vyrian
$4.900
Chip Stock
A2Z Electronics, Inc.
Prism Electronics
Continental Prestige Electronics
$2.943
Argo Parts USA
Corohmni
$3.203
Advanced Electronics
$3.299
$3.134
Ampacity Inc.
$4.170
Semicontronic
$4.066
$4.045
Corphita
$4.410
Parana Technologies
$8.742
$9.424
DigiPath Technology Company
$9.627
$8.856
ChromeModa Solutions
$9.823
$8.055
IDEA Electronic Components Group
$9.332
$8.841
Kepictronics
Authorized Procurement Solutions
Glotronic Ltd.
A-Z Elektronik GmbH
Alle Elektronik GmbH
The use of plastic/epoxy material makes this peripheral driver lightweight and durable, ideal for various applications.
Being surface mountable allows for easy and efficient installation of this peripheral driver onto a circuit board.
With a maximum supply voltage of 32V, this peripheral driver can handle a wide range of input voltages, making it versatile for different power supply systems.
The rectangular package shape provides a compact and space-saving design, making it suitable for confined spaces in electronic equipment.
The inclusion of over current and thermal protections ensures the safety and longevity of the peripheral driver by preventing damage from excessive current or heat.
With a power supply of 24V, this peripheral driver is compatible with standard voltage requirements in many electronic devices.
The 14 terminals offer flexibility in connecting various components, making this peripheral driver versatile for multiple circuit configurations.
This package style combines multiple features such as heat sinking, thin profile, and shrink pitch for efficient thermal management and space optimization in electronic designs.
The low minimum supply voltage requirement of 8V ensures that this peripheral driver can operate even in systems with lower voltage outputs.
The high maximum operating temperature of 85°C allows this peripheral driver to function reliably in harsh environmental conditions.
With a minimum operating temperature of -40°C, this peripheral driver can withstand extreme cold temperatures, expanding its usability in diverse settings.
Peripheral Drivers DRV104PWP attributes and parameters. Explore more Peripheral Drivers devices from Texas Instruments
Built-in Protections:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
DRV104PWP Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Design 22/Feb/2022
PCN Assembly/Origin - Mult Devices 17/Oct/2017
PCN Packaging - TSSOP Symbolization Update 24/Oct/2022
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Lite-on Semiconductor
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
1554216004
Molex
WIRE AND CABLE;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Telefunken Microelectronics
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Continental Device India
Rectron
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
IRS2113PBF
Infineon Technologies
IRS2113PBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V and built-in transient and under voltage protections. It operates in automotive-grade temperatures, has a turn-on time of 0.16us, and is commonly used as a buffer or inverter-based peripheral driver in various applications.
AP2171WG-7
Diodes Incorporated
AP2171WG-7 by Diodes Inc. is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, thermal, and under voltage conditions. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 1A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
BSP752TXUMA1
BSP752TXUMA1 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 6-52 V. This MOS technology-based driver has a nominal output peak current limit of 1.7 A and is ideal for industrial applications requiring sink output flow direction.
TPS22965QWDSGRQ1
Texas Instruments
TPS22965QWDSGRQ1 by Texas Instruments is an automotive-grade peripheral driver with a supply voltage range of 2.5V to 5.5V and operating temperature from -40°C to 125°C. It features built-in transient protection, small outline package style, and source/sink current flow direction, making it ideal for automotive applications requiring reliable signal buffering or inversion.
BSP742RIXT
BSP742RIXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 13.5 V and has a max supply voltage of 34 V. This small outline package is ideal for applications requiring sink output current flow direction.
DS2482S-800
Maxim Integrated
DS2482S-800 by Maxim Integrated is a peripheral driver with 8 functions, operating voltage range of 2.9V to 5.5V, and industrial temperature grade. It is used as a buffer or inverter based peripheral driver in various applications requiring source current flow direction control.
ITS4060SSJNXUMA1
ITS4060SSJNXUMA1 by Infineon is a Peripheral Driver with 8 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage situations. Ideal for automotive applications due to its CMOS technology and source output current flow direction.
VNQ5027AKTR-E
STMicroelectronics' VNQ5027AKTR-E is a 4-function peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 8-36V and has a turn-on/off time of 40us. This CMOS technology-based driver is ideal for applications requiring SOURCE output current flow direction.
AUIPS6041GTR
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2003ADR2G
Rochester Electronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;
VND7140AJ12TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
VNQ7140AJTR
VNQ7140AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 4-28 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.
MIC2076-1YM-TR
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ITS711L1FUMA1
ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.
IRS21844MTRPBF
International Rectifier Hirel Products
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HQCCN; Package Shape: SQUARE;
AUIPS7081RTRL
AUIPS7081RTRL by Infineon Technologies is a peripheral driver with 35V max supply voltage, 2.3A max output current, and AEC-Q100 screening level. It offers built-in protections for transient, over current, and thermal issues. Ideal for automotive applications requiring reliable power supplies in a compact package style.
SN75451BDR
SN75451BDR by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It features open-collector output polarity and can handle a max output current of 0.5A. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature grades.
IRS2304STRPBF
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SSOP; Package Shape: RECTANGULAR;
BTS3205NHUSA1/SAMPLE
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
ITS4200SMEOHUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV103H/2K5
DRV103H/2K5 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections against transient, over current, and thermal issues. It is commonly used as a buffer or inverter based peripheral driver for industrial applications.
DRV103H/2K5G3
DRV103H/2K5G3 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates in industrial temperature grades from -40 to 85°C, making it suitable for various applications requiring a nominal output peak current limit of 3.5A. The package style is small outline with gull wing terminals, ideal for surface mount designs.
DRV103H
DRV103H by Texas Instruments is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 8V to 24V and has a max supply voltage of 32V. With a small outline package style, it is ideal for industrial applications requiring a nominal output peak current limit of 3A.
DRV103HG3
DRV103HG3 by Texas Instruments is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 8V to 24V and has a max output peak current limit of 3.5A. This NMOS technology-based driver is ideal for applications requiring buffer or inverter based peripheral drivers in military-grade temperature environments.
DRV104PWPRG4
DRV104PWPRG4 by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. With a nominal output peak current limit of 2A, it is ideal for industrial applications requiring precise control of peripherals. This small outline package with gull wing terminals operates in temperatures ranging from -40 to 85°C.
DRV104PWPR
DRV104PWPR by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. It has a max output current of 1.2A, making it suitable for industrial applications requiring precise control of peripheral devices. With its small outline package style and source flow direction, this driver is ideal for compact electronic designs that demand efficient power management.
DRV103U
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DRV104PWPG4
DRV104PWPG4 by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. It operates in industrial temperature grades from -40 to 85°C, making it suitable for various applications requiring a max output current of 1A, such as motor control systems.
DRV103U/2K5
DRV103U/2K5 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates b/w -55 to 125 °C and has a nominal output peak current limit of 3A. Ideal for military-grade applications requiring buffer or inverter based peripheral drivers.
DRV103U/2K5G4
DRV103U/2K5G4 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates in a temperature range from -55°C to 125°C, making it suitable for military-grade applications. With a nominal output peak current limit of 3.5A, this buffer or inverter-based peripheral driver is ideal for various electronic systems requiring precise control.
DRV103UG4
DRV102T
Burr-Brown Corporation
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 7; Package Code: ZIP; Package Shape: RECTANGULAR;
DRV102T by Texas Instruments is a peripheral driver with a max supply voltage of 60V. It has built-in protections for over current and thermal issues, making it suitable for military-grade applications. With a nominal output peak current limit of 2.7A, it is an ideal choice for buffer or inverter based peripheral driver interface ICs.
DRV102FKTWT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 7; Package Code: SOP; Package Shape: RECTANGULAR;
DRV102FKTWTG3
DRV102TG3
DRV102TG3 by Texas Instruments is a peripheral driver with a max supply voltage of 60V and built-in protections for over current and thermal issues. It operates b/w -55 to 125°C, suitable for military-grade applications. With a nominal output peak current limit of 2.7A, it is ideal for buffer or inverter-based systems requiring a source flow direction.
DRV102F/500
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 7; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
DRV101FKTWTG3
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 7; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved