Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-770985-0 is a male contact plug housing with 600V rating. It features crimp terminals for 22-26 AWG wires, suitable for power applications. Constructed with stranded brass material, it has approvals from CSA and UL for use in assemblies requiring up to 105°C operating temperature.
Median Price
$0.603
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.280
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.282
Heilind Electronics
$0.329
$0.317
$0.305
Newark
$0.639
$0.468
$0.409
Mouser Electronics
$0.810
$0.579
$0.470
$0.445
RS Americas
$0.818
$0.622
$0.499
DigiKey
$0.950
$0.686
$0.583
$0.539
TE Connectivity
$0.970
$0.620
$0.460
Powell Electronics
$1.403
$0.982
Conrad
$1.406
$1.242
Chip1Stop
$37.100
$20.600
Future Electronics
$0.405
$0.380
$0.365
PEI Genesis
Master Electronics
$0.567
$0.367
$0.353
Verical
$0.457
$0.432
$0.419
Farnell
$0.390
Element14
$0.800
$0.681
$0.668
TTI
$0.312
$0.296
Avnet
$0.208
DF Sales Co.
NAC Semi
IBS Electronics
$0.775
$0.652
$0.557
Electro Sonic
$0.636
$0.332
$0.315
VNN
Rapid Electronics
$0.543
EMSNET
Nova Conductors
Allen Electronics Distributors
$0.930
$0.890
Perfect Parts
Kepictronics
Assy Fe
GreenTree Electronics
EMSNET (Excess)
Authorized Procurement Solutions
Argo Parts USA
Netroflash
Continental Prestige Electronics
Having CSA and UL approvals ensures that this product meets safety and quality standards, making it a reliable choice.
The high rated voltage of 600V makes this product suitable for applications requiring high power.
With a minimum operating temperature of -55°C, this product can withstand cold environments and extreme conditions.
The high rated current of 9.5A allows this product to handle significant power loads safely and efficiently.
Made from durable brass material, this product offers excellent conductivity and longevity.
Assembly Products 1-770985-0 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1-770985-0 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/56-351
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Semicoa
208680-1
TE Connectivity 208680-1 is a UL approved RECEPTACLE with Shell Sizes of 23. It operates b/w -55°C to 105°C, accommodating wire sizes up to 0 AWG. Made of POLYETHYLENE, it's ideal for CAP ITEM assembly applications.
12045773
Aptiv
Aptiv 12045773 CONTACT is a MALE CRIMP terminal with 0.067-0.109" cable entry. It has a STRAIGHT mounting style, 0.315" terminal length, and is made of NONFERROUS material. Ideal for assembly products requiring precise male contact connections.
1-583616-0
TE Connectivity 1-583616-0 CONTACT features CRIMP terminals for wire sizes 28-24 AWG, rated at 5A current. Suitable for POWER AND SIGNAL applications with operating temperatures from -40 to 85°C. Ideal for assemblies requiring FEMALE contacts with 0.24 mm2 cross-section area.
AW3P-1939
Amphenol
CONNECTOR ACCESSORY;
1060-16-0644
TE Connectivity 1060-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 16 AWG and rated current of 13A. Ideal for applications requiring male contact gender, with operating temperatures ranging from -55 to 150°C.
DF13-3032SCF
Hirose Electric
DF13-3032SCF by Hirose Electric is a CRIMP terminal with POLYAMIDE insulator. Rated for 150V AC, it has a contact resistance of 30 mohm and can handle up to 1A current. Ideal for applications requiring FEMALE contacts, such as in UL-approved assemblies operating b/w -35°C to 85°C.
AT62-16-0122
AT60-20-0122
64325-1023
Molex
CONNECTOR ACCESSORY; Assembly Item Name: SEALING ITEM; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 64318, 64319, 64320, 64321;
M23053/16-003-0
Dunbar Products
ASSEMBLY ITEMS; IEC Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO;
T3930102001-000
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG;
43030-0008
Molex 43030-0008 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Ideal for use with 43025/43645/44133 assemblies, it has a 0.138" terminal length and 0.073" cable entry.
1-2308340-5
TE Connectivity 1-2308340-5 is an Assembly Product with shielding, operating from -40 to 90°C. Made of ZINC ALLOY, it supports wire sizes up to 0 AWG. Mounting options include SCREW and #4-40 UNC, ideal for various industrial applications.
205980-1
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: HARDWARE-RETAINING SCREW; Additional Features: INDIVIDUAL KIT; IEC Conformity: NO;
DF20F-2830SCFA
The Hirose Electric DF20F-2830SCFA is a crimp terminal with operating temperatures from -35°C to 85°C. It supports wire sizes ranging from 30 AWG to 28 AWG and is designed for use with UL1571 cables. The bellowed contact design and phosphor bronze material make it ideal for applications requiring reliable female contacts in straight mounting configurations.
280-358
Wago
TERMINAL BLOCK ACCESSORY;
5-66504-9
TE Connectivity 5-66504-9 CONTACT features CRIMP terminal type, suitable for 24-20 AWG wires. With a finish thickness of 30, it has a straight mounting style and round pin-socket contact design. Ideal for applications requiring 0.05-0.06 inch cable entry such as automotive or industrial assemblies.
5227
Keystone Electronics
0462-209-16141
TE Connectivity's 0462-209-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 14 AWG wire and rated at 13A. Ideal for POWER applications requiring FEMALE contacts in STRAIGHT mounting style.
SXA-001T-P0.6
J S T Mfg
SXA-001T-P0.6 by J S T Mfg is a UL approved XA connector with crimp terminals for 28-22 AWG wires, rated at 3A and 250V AC/DC. It features female contacts with 20 mohm resistance, suitable for applications requiring straight mounting and operating temperatures b/w -25 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-770520-1
TE Connectivity's 1-770520-1, a CRIMP terminal with stamped contact design, supports wire gauge from 24 to 22 AWG. It operates b/w -40°C to 105°C and handles up to 11A current. Ideal for applications requiring precise crimping in tight spaces with cable entries ranging from 0.055" to 0.07".
1-770904-1
TE Connectivity's 1-770904-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications with female contacts.
1-770988-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Maximum Cable Entry: .094 inch; Contact Gender: FEMALE; Material: PHOSPHOR BRONZE;
1-770903-1
TE Connectivity's 1-770903-1 is a male contact assembly item with crimp terminal type. It has a rated voltage of 600V, suitable for discrete wire applications. Constructed with stranded finish thickness of 30, it operates b/w -55 to 105 °C and supports wire gauge from 22 AWG to 18 AWG.
1-770988-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Cross Section Area: .9 mm2; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 18;
1-770246-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Design: POWER; Usage: STANDARD UNIVERSAL MATE-N-LOK; MIL Conformity: NO;
1-770904-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Wire Gauge (AWG): 18; Terminal Type: CRIMP; Finish Thickness: 30;
1-770007-0
TE Connectivity 1-770007-0 is a male contact with crimp terminal type for universal mate-n-lok applications. It has a rated voltage of 600V, rated current of 7A, and can accommodate wire sizes from 20 to 14 AWG. The contact is made of brass and suitable for power applications with operating temperatures ranging from -55 to 120°C.
1-770251-0
TE Connectivity 1-770251-0 is a crimp terminal with stranded construction, rated for 600V and 17A. Ideal for power applications, it accommodates wire sizes from 20 to 14 AWG and operates b/w -55°C to 120°C.
1-770987-0
TE Connectivity 1-770987-0 is a male contact plug housing with approvals from CSA and UL. It features a stranded construction, crimp terminal type, and 600V rated voltage. Ideal for discrete wire applications, it has a max operating temperature of 105°C and can accommodate wire sizes ranging from 22 to 18 AWG.
1-770253-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 13 A; Wire Gauge (AWG): 18; Maximum Cable Entry: .1 inch; Cross Section Area: 1 mm2;
17700005002
Harting Electronics & Kg
CONNECTOR ACCESSORY; Manufacturer Series: 1770000500;
17700004003
CONNECTOR ACCESSORY; Manufacturer Series: 1770000400;
1-770902-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; MIL Conformity: NO; Rated DC Voltage: 600 V; Material: BRASS;
1-770902-1
TE Connectivity's 1-770902-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications.
1-770903-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Finish Thickness: 30; Construction: STRANDED; MIL Conformity: NO;
1-770986-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Finish Thickness: 30; Cross Section Area: .4 mm2; Construction: STRANDED;
1-770004-0
TE Connectivity 1-770004-0 is a crimp terminal with approvals from CSA, UL, and VDE. It has a rated voltage of 600V and can handle temperatures from -55 to 120°C. Ideal for power applications with wire gauge ranging from 10 to 12 AWG.
1-770901-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Terminal Type: CRIMP; Rated DC Voltage: 600 V; Maximum Wire Size: 22 AWG;
1-770248-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Material: BRASS; Assembly Item Name: CONTACT; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved