Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-770986-0 is a power plug housing with stranded construction, crimp terminals, and rated voltage of 600V. It supports wire gauge up to 22 AWG, suitable for discrete wire applications at temperatures ranging from -55°C to 105°C. The female contact design features brass material and can handle a max current of 9.5A.
Median Price
$0.713
Lifecycle Status
Suppliers In-Stock
34
In-Stock Inventory
1k+
Sager
1+ parts
$0.413
100+ parts
-
1k+ parts
$0.382
10k+ parts
$0.368
Interstate Connecting
$0.430
$0.378
$0.341
Boersig
$0.483
Chip1Stop
$0.597
$0.402
Arrow
$0.613
$0.417
$0.380
$0.376
RS Americas
$0.707
$0.537
$0.431
Distrelec
$0.817
$0.480
$0.469
Newark
$0.845
$0.571
$0.485
Mouser Electronics
$0.890
$0.588
$0.493
$0.467
DigiKey
$0.641
$0.545
$0.504
RS (Exports)
$0.910
$0.770
$0.650
TE Connectivity
$1.060
$0.680
$0.510
Powell Electronics
$1.403
$0.982
Conrad
$1.406
$1.242
Adafruit Industries
$3.993
$3.953
PEI Genesis
Future Electronics
$0.345
$0.330
$0.310
Verical
$0.719
Farnell
$0.391
Element14
Master Electronics
$0.560
$0.323
$0.300
NAC Semi
$0.587
IBS Electronics
$0.688
$0.405
$0.387
Rapid Electronics
$0.665
Electro Sonic
$0.579
$0.332
$0.315
VNN
TME
$0.521
American Connector Supply Corp
J2 Sourcing AB
Vicor Industries, Inc.
Prism Electronics
Nova Conductors
EMSNET
Elcom Components
Allen Electronics Distributors
$0.830
$0.520
$0.460
Advanced Electronics
$3.793
Perfect Parts
Assy Fe
Continental Prestige Electronics
$0.463
$0.371
Argo Parts USA
Aranea Global
The plug housing design allows for easy and secure connections, making it ideal for use in various electronic applications.
With a high rated voltage of 600 V, this assembly product can handle high power applications without the risk of electrical damage.
The compatibility with 22 AWG wire ensures a reliable and efficient electrical connection, suitable for various wiring projects.
The cross-section area of 0.4 mm2 allows for sufficient current flow, making it suitable for moderate power applications.
The straight mounting style ensures easy installation and secure connection, making it a convenient choice for assembly projects.
Assembly Products 1-770986-0 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Cross Section Area:
Design:
Finish Thickness:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43030-0011
Molex
The Molex 43030-0011 is a female crimp contact with a round pin socket design, suitable for use in receptacle assemblies. It supports wire sizes from 26 AWG to 30 AWG and features a 0.138 inch terminal length. This assembly product is made of phosphor bronze and has a max cable entry of 0.05 inch, ideal for straight mounting applications.
AWM-2SB
Amphenol
CONNECTOR ACCESSORY;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
AT62-20-0122
Assembly Items;
1607355
Phoenix Contact
16-02-0103
KT0009
Bulgin
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: RETAINER CLIP; IEC Conformity: NO; Material: STEEL;
43031-0003
Molex 43031-0003 CONTACT features CHAIN design, PHOSPHOR BRONZE material. Supports wire sizes 24-20 AWG with 0.073" cable entry. Ideal for 43020, 43640, and 44300 applications requiring male contacts in straight mounting style.
350537-6
TE Connectivity's 350537-6 CONTACT features crimp terminal type, 600V rated voltage, and 19A rated current. Ideal for UNIVERSAL MATE-N-LOK II applications with stranded construction and phosphor bronze material.
1-66099-5
TE Connectivity 1-66099-5 is a crimp terminal for CPC/G and M series connectors. Featuring brass material, it has a cross section area of 1.4 mm2 and can accommodate wire sizes from 18 to 16 AWG. Ideal for power and signal applications with a rated current of 13A at temperatures ranging from -55 to 90°C.
FMK2G-K201
FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.
AWM-12S
282081-1
TE Connectivity 282081-1 is a SEALING ITEM for AMP SUPERSEAL 1.5 SERIES CONNECTORS. With a temp range of -40 to 130°C, it uses SILICONE RUBBER material and supports wire sizes up to 0 AWG.
M23053/5-103-9
Sumitomo Electric Industries
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; IEC Conformity: NO;
L17D204182LEX
350689-1
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Maximum Cable Entry: .1 inch; Design: POWER; Minimum Cable Entry: .04 inch;
1SET111004R0000
TE Connectivity's 1SET111004R0000 features stranded construction with polypropylene insulator, suitable for discrete wire applications. With a max operating temp of 105°C, it supports 18 AWG wire gauge and straight mounting style.
M300-0020045
Harwin Plc
W6P
W6P by TE Connectivity is an Assembly Product with UL approval. It is designed for DT SERIES applications, with a temperature range of -55 to 125°C. Featuring a max wire size of 0 AWG, it is made of Polybutylene Terephthalate and suitable for power and signal connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-770520-1
TE Connectivity's 1-770520-1, a CRIMP terminal with stamped contact design, supports wire gauge from 24 to 22 AWG. It operates b/w -40°C to 105°C and handles up to 11A current. Ideal for applications requiring precise crimping in tight spaces with cable entries ranging from 0.055" to 0.07".
1-770904-1
TE Connectivity's 1-770904-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications with female contacts.
1-770988-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Maximum Cable Entry: .094 inch; Contact Gender: FEMALE; Material: PHOSPHOR BRONZE;
1-770903-1
TE Connectivity's 1-770903-1 is a male contact assembly item with crimp terminal type. It has a rated voltage of 600V, suitable for discrete wire applications. Constructed with stranded finish thickness of 30, it operates b/w -55 to 105 °C and supports wire gauge from 22 AWG to 18 AWG.
1-770988-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Cross Section Area: .9 mm2; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 18;
1-770246-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Design: POWER; Usage: STANDARD UNIVERSAL MATE-N-LOK; MIL Conformity: NO;
1-770904-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Wire Gauge (AWG): 18; Terminal Type: CRIMP; Finish Thickness: 30;
1-770007-0
TE Connectivity 1-770007-0 is a male contact with crimp terminal type for universal mate-n-lok applications. It has a rated voltage of 600V, rated current of 7A, and can accommodate wire sizes from 20 to 14 AWG. The contact is made of brass and suitable for power applications with operating temperatures ranging from -55 to 120°C.
1-770251-0
TE Connectivity 1-770251-0 is a crimp terminal with stranded construction, rated for 600V and 17A. Ideal for power applications, it accommodates wire sizes from 20 to 14 AWG and operates b/w -55°C to 120°C.
1-770987-0
TE Connectivity 1-770987-0 is a male contact plug housing with approvals from CSA and UL. It features a stranded construction, crimp terminal type, and 600V rated voltage. Ideal for discrete wire applications, it has a max operating temperature of 105°C and can accommodate wire sizes ranging from 22 to 18 AWG.
1-770253-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 13 A; Wire Gauge (AWG): 18; Maximum Cable Entry: .1 inch; Cross Section Area: 1 mm2;
17700005002
Harting Electronics & Kg
CONNECTOR ACCESSORY; Manufacturer Series: 1770000500;
17700004003
CONNECTOR ACCESSORY; Manufacturer Series: 1770000400;
1-770902-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; MIL Conformity: NO; Rated DC Voltage: 600 V; Material: BRASS;
1-770902-1
TE Connectivity's 1-770902-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications.
1-770903-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Finish Thickness: 30; Construction: STRANDED; MIL Conformity: NO;
1-770004-0
TE Connectivity 1-770004-0 is a crimp terminal with approvals from CSA, UL, and VDE. It has a rated voltage of 600V and can handle temperatures from -55 to 120°C. Ideal for power applications with wire gauge ranging from 10 to 12 AWG.
1-770901-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Terminal Type: CRIMP; Rated DC Voltage: 600 V; Maximum Wire Size: 22 AWG;
1-770248-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Material: BRASS; Assembly Item Name: CONTACT; MIL Conformity: NO;
1-770834-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; MIL Conformity: NO; Minimum Cable Entry: .035 inch; Minimum Wire Size: 30 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved