Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-770248-0 is a male contact with crimp terminal type for universal mate-n-lok applications. It has a rated voltage of 600V, 30 finish thickness, and can handle wire gauge from 20 to 14 AWG. Ideal for power designs requiring up to 7A current at temperatures ranging from -55 to 120°C.
Median Price
$1.900
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Newark
1+ parts
$0.828
100+ parts
1k+ parts
10k+ parts
Farnell
$1.480
$1.060
$1.000
Mouser Electronics
$2.140
$1.550
$1.270
$1.180
DigiKey
$2.320
$1.675
$1.424
$1.318
TE Connectivity
$2.790
$1.790
$1.330
-
Element14
$2.910
$2.100
$1.780
$1.750
Master Electronics
$1.560
$1.170
$1.010
Verical
$1.494
$1.377
$1.329
Powell Electronics
$0.700
VNN
IBS Electronics
$4.357
$4.329
$1.537
Nova Conductors
Bristol Electronics
Continental Prestige Electronics
$1.190
$0.995
$0.799
Argo Parts USA
Perfect Parts
Netroflash
Assy Fe
Having multiple approvals from reputable organizations ensures the product meets safety and quality standards.
High rated voltage makes this product suitable for various electrical applications.
Ability to perform in low temperatures makes this product reliable in different environments.
Support for thicker wire gauge allows for handling higher power loads.
Ability to carry a high current makes this product suitable for power applications.
Brass construction provides durability and good conductivity for efficient electrical connections.
Assembly Products 1-770248-0 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Contact Style:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated AC Voltage:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Sensitron Semiconductor
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Jiangsu Jiejie Microelectronics
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
Transys Electronics
Plessey Semiconductors Discrete Components Div
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
W8S
W8S by TE Connectivity is an assembly product designed for the DT SERIES. It has a max operating temperature of 125°C and a min operating temperature of -55°C. With a max wire size of 0 AWG, it is suitable for power and signal applications using polybutylene terephthalate material.
AW2S-D
Amphenol
CONNECTOR ACCESSORY;
5054311000
Molex
Molex 5054311000 CONTACT features: Rated AC Voltage 50V, Rated Current 1.5A, Material COPPER ALLOY. Application: Ideal for assemblies requiring FEMALE contacts with STRAIGHT mounting and SQUARE PIN-SOCKET style. Accepts wire sizes from 30 AWG to 26 AWG.
13711542
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Material: COPPER ALLOY; Maximum Cable Entry: .063 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .0472 inch;
10757690
Aptiv
M80-0130005
Harwin Plc
The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.
1SNK908310R0000
Abb
CONNECTOR ACCESSORY; Rated Current: 57 A; Insulator Material: POLYAMIDE; Rated AC Voltage: 600 V; Maximum Operating Temperature: 110 Cel; Rated DC Voltage: 600 V;
281934-4
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; IEC Conformity: NO; MIL Conformity: NO; Material: LSR; Maximum Operating Temperature: 130 Cel;
3022276
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Approvals (V): UL; Material: PA; Mounting Style: STRAIGHT;
1313600000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY;
46235-0001
Molex 46235-0001 CONTACT features CRIMP terminals, COPPER ALLOY material, and FEMALE contact gender. It is used in applications requiring wire sizes from 24 to 20 AWG with a rated current of 5A. Operating temperatures range from -40 to 105°C for various assemblies like 43025, 43645, and 44133.
DF13-2630SCF
Hirose Electric
DF13-2630SCF by Hirose Electric is a crimp terminal connector with 30-26 AWG wire size compatibility. It has a rated current of 1A and contact resistance of 30 mohm. Ideal for applications requiring female contact gender, such as DF13 series connectors in assembly products.
DZ5CE003
Schneider Electric Sa
DZ5CE003 by Schneider Electric Sa is a plastic ferrule with approvals for NFC and UL. It can handle temperatures from -20 to 105°C, suitable for wire sizes up to 24 AWG. Ideal for electrical assemblies requiring reliable copper connectors in various applications.
1-206062-4
TE Connectivity's 1-206062-4 CLAMP KIT features Shell Size 11, accommodates up to 0 AWG wire size, and has a max cable entry of 0.329". Ideal for straight mounting with polyethylene material, it uses a 5/8-24 UNEF-2B screw for installation in various assembly products.
SXH-001T-P0.6
J S T Mfg
SXH-001T-P0.6 by J S T Mfg is a CRIMP terminal with 28-22 AWG wire size range, rated for 3A current at 250V AC/DC. Featuring bellowed contact design, it's ideal for applications requiring female contacts and operating temperatures from -25 to 85°C.
MINI-SSHL-002T-P0.2
MINI-SSHL-002T-P0.2 by J S T Mfg is a UL approved assembly product with crimp terminals, stamped contact design, and bellowed contact style. It is used in GH Series connectors for 30-26 AWG wires, rated at 1A and 50V DC/AC. Operating temperature ranges from -25 to 85°C making it ideal for various electrical applications.
DF1B-2428SCA
DF1B-2428SCA by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for applications requiring reliable electrical connections in various assembly products.
09150006102
Harting Electronics & Kg
Harting Electronics & Kg's 09150006102 is a HAN D CONNECTOR with CRIMP terminals, rated for 10A current. It features male contacts with 3mohm resistance and accepts up to 18 AWG wire size. Compliant with IEC standards, it is ideal for applications requiring reliable electrical connections in various industries.
350547-1
TE Connectivity 350547-1 is a universal mate-n-lok plug and cap housing with crimp terminals. It has a rated voltage of 600V, rated current of 19A, and wire gauge range from 20AWG to 14AWG. Ideal for power applications with male contact gender, straight mounting style, and round pin-socket design.
855-9900
Wago
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-770520-1
TE Connectivity's 1-770520-1, a CRIMP terminal with stamped contact design, supports wire gauge from 24 to 22 AWG. It operates b/w -40°C to 105°C and handles up to 11A current. Ideal for applications requiring precise crimping in tight spaces with cable entries ranging from 0.055" to 0.07".
1-770904-1
TE Connectivity's 1-770904-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications with female contacts.
1-770988-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Maximum Cable Entry: .094 inch; Contact Gender: FEMALE; Material: PHOSPHOR BRONZE;
1-770903-1
TE Connectivity's 1-770903-1 is a male contact assembly item with crimp terminal type. It has a rated voltage of 600V, suitable for discrete wire applications. Constructed with stranded finish thickness of 30, it operates b/w -55 to 105 °C and supports wire gauge from 22 AWG to 18 AWG.
1-770988-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Cross Section Area: .9 mm2; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 18;
1-770246-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Design: POWER; Usage: STANDARD UNIVERSAL MATE-N-LOK; MIL Conformity: NO;
1-770904-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Wire Gauge (AWG): 18; Terminal Type: CRIMP; Finish Thickness: 30;
1-770007-0
TE Connectivity 1-770007-0 is a male contact with crimp terminal type for universal mate-n-lok applications. It has a rated voltage of 600V, rated current of 7A, and can accommodate wire sizes from 20 to 14 AWG. The contact is made of brass and suitable for power applications with operating temperatures ranging from -55 to 120°C.
1-770251-0
TE Connectivity 1-770251-0 is a crimp terminal with stranded construction, rated for 600V and 17A. Ideal for power applications, it accommodates wire sizes from 20 to 14 AWG and operates b/w -55°C to 120°C.
1-770987-0
TE Connectivity 1-770987-0 is a male contact plug housing with approvals from CSA and UL. It features a stranded construction, crimp terminal type, and 600V rated voltage. Ideal for discrete wire applications, it has a max operating temperature of 105°C and can accommodate wire sizes ranging from 22 to 18 AWG.
1-770253-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 13 A; Wire Gauge (AWG): 18; Maximum Cable Entry: .1 inch; Cross Section Area: 1 mm2;
17700005002
CONNECTOR ACCESSORY; Manufacturer Series: 1770000500;
17700004003
CONNECTOR ACCESSORY; Manufacturer Series: 1770000400;
1-770902-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; MIL Conformity: NO; Rated DC Voltage: 600 V; Material: BRASS;
1-770902-1
TE Connectivity's 1-770902-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications.
1-770903-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Finish Thickness: 30; Construction: STRANDED; MIL Conformity: NO;
1-770986-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Finish Thickness: 30; Cross Section Area: .4 mm2; Construction: STRANDED;
1-770004-0
TE Connectivity 1-770004-0 is a crimp terminal with approvals from CSA, UL, and VDE. It has a rated voltage of 600V and can handle temperatures from -55 to 120°C. Ideal for power applications with wire gauge ranging from 10 to 12 AWG.
1-770901-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Terminal Type: CRIMP; Rated DC Voltage: 600 V; Maximum Wire Size: 22 AWG;
1-770247-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Maximum Operating Temperature: 120 Cel; Terminal Type: CRIMP; Construction: STRANDED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved