Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1-770903-1 is a male contact assembly item with crimp terminal type. It has a rated voltage of 600V, suitable for discrete wire applications. Constructed with stranded finish thickness of 30, it operates b/w -55 to 105 °C and supports wire gauge from 22 AWG to 18 AWG.
Median Price
$0.560
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Master Electronics
1+ parts
$0.427
100+ parts
-
1k+ parts
$0.388
10k+ parts
$0.339
Arrow
$0.431
$0.370
$0.334
DigiKey
$0.750
$0.543
$0.461
Mouser Electronics
$0.598
TE Connectivity
$0.810
$0.520
$0.390
Verical
Powell Electronics
Chip1Stop
$0.371
$0.305
$0.303
Nova Conductors
$0.353
IBS Electronics
$0.577
$0.525
$0.463
VNN
Vyrian
Electro Sonic
$0.332
Sensible Micro Corp
$0.475
$0.442
Semicontronic
$0.292
$0.285
$0.283
Continental Prestige Electronics
$0.330
$0.323
Argo Parts USA
$0.320
Netroflash
Aztec Data Supply Inc.
$7.794
Perfect Parts
Authorized Procurement Solutions
Assy Fe
Having CSA and UL approvals ensures that the product meets safety and quality standards, making it a reliable choice for use in various applications.
With a high rated voltage of 600 V, this product is suitable for use in applications where higher voltage levels are required, providing a versatile solution.
Designed for use with 18 AWG wire gauge, this product is ideal for applications requiring thicker wire sizes, ensuring a secure and efficient connection.
With a minimum operating temperature of -55°C, this product can withstand low temperature environments, making it suitable for use in various conditions.
The high maximum operating temperature of 105°C ensures that this product can withstand elevated temperature environments, allowing for reliable performance under heat stress.
Assembly Products 1-770903-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1-770903-1 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
EU2B-YS3103F
Idec
ROTARY SWITCH;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Sangdest Microelectronics (Nanjing)
09150006102
Harting Electronics & Kg
Harting Electronics & Kg's 09150006102 is a HAN D CONNECTOR with CRIMP terminals, rated for 10A current. It features male contacts with 3mohm resistance and accepts up to 18 AWG wire size. Compliant with IEC standards, it is ideal for applications requiring reliable electrical connections in various industries.
5748676-2
TE Connectivity 5748676-2 is a backshell with 2 shell sizes, shielding, and 0.185" min cable entry. Ideal for plug/receptacle applications with max temp of 105°C. Features zinc alloy material, #4-40 screw mounting options, and supports up to 0 AWG wire size.
SDN-21T-P1.5
J S T Mfg
SDN-21T-P1.5 by J S T Mfg is a CRIMP terminal connector with approvals from CSA, TUV, and UL. It is designed for power and signal applications with a rated current of 7A, suitable for wire sizes ranging from 22 AWG to 18 AWG. This connector has a max operating temperature of 85°C and can handle up to 250V AC/DC.
02-08-2004
Molex
Molex 02-08-2004 is a CRIMP FEMALE CONTACT with STRAIGHT MOUNTING STYLE. Made of BRASS, it features SQ PIN-SKT CONTACT STYLE. Ideal for assembly products requiring secure electrical connections in various applications.
206966-9
TE Connectivity 206966-9 is an Assembly Product with 13 shell sizes. It supports up to 0 AWG wire size and features a STRAIGHT mounting style. Made of POLYETHYLENE, it offers SCREW mounting options and is ideal for applications requiring 3/4-20 UNEF-2B compatibility.
1053251004
CONNECTOR ACCESSORY;
RC16M23K
Souriau
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 15.75; IEC Conformity: NO; Design: SIGNAL; Additional Features: UNDER PLATING: NICKEL;
5600850101
Molex 5600850101 is a CRIMP terminal with 3A rated current and 125V DC voltage. It is used in 502351 HOUSING for power and signal applications, featuring CHAIN contact design. Operating temperature ranges from -40 to 105 °C.
350537-6
TE Connectivity's 350537-6 CONTACT features crimp terminal type, 600V rated voltage, and 19A rated current. Ideal for UNIVERSAL MATE-N-LOK II applications with stranded construction and phosphor bronze material.
50394-8100
Molex 50394-8100 is a crimp terminal with a contact design of loose and bellowed contact style. It has a finish thickness of 15 and is commonly used in assembly products for applications requiring female contacts, straight mounting style, and 0.093 inch terminal length.
39-00-0079
Molex 39-00-0079 is a crimp terminal with square pin-socket contact design. It supports up to 16 AWG wire size and 0.122" cable entry, ideal for 5557, 30067, 42474, and 44516 series housing applications. Made of phosphor bronze with a finish thickness of 35, it features female contact gender and straight mounting style.
796075-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 105 Cel; Contact Gender: MALE; Maximum Wire Size: 0 AWG;
DTM06-6S-C017
TE Connectivity's DTM06-6S-C017 is a FEMALE contact assembly product with 7.5A rated current and 250V rated DC voltage. It can handle temperatures from -55°C to 125°C, with cable entries ranging from 0.053" to 0.12". Ideal for power and signal applications.
3030161
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: PLUG-IN BRIDGE; Material: COPPER; Approvals (V): EAC; UL; IEC Conformity: NO; DIN Conformity: NO;
09200030301
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: HOUSING; Maximum Operating Temperature: 125 Cel;
DF11-2428SCFA(04)
Hirose Electric
33012-3003
Molex 33012-3003 is a female contact for MX150 connector with crimp terminal type. It has a rated current of 10A, contact resistance of 8mohm, and can handle wire sizes up to 22 AWG. Ideal for applications requiring straight mounting style and operating temperatures ranging from -40°C to 105°C.
M85049/88-19W03
CONNECTOR ACCESSORY; Shell Sizes: 19; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Material: ALUMINUM ALLOY; Maximum Operating Temperature: 175 Cel;
RM16M23K
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 16; Contact Resistance: 3 mohm; Contact Style: ROUND PIN-SOCKET; Maximum Wire Size: 16 AWG;
1731110058
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-770520-1
TE Connectivity's 1-770520-1, a CRIMP terminal with stamped contact design, supports wire gauge from 24 to 22 AWG. It operates b/w -40°C to 105°C and handles up to 11A current. Ideal for applications requiring precise crimping in tight spaces with cable entries ranging from 0.055" to 0.07".
1-770904-1
TE Connectivity's 1-770904-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications with female contacts.
1-770988-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Maximum Cable Entry: .094 inch; Contact Gender: FEMALE; Material: PHOSPHOR BRONZE;
1-770988-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Cross Section Area: .9 mm2; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 18;
1-770246-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Design: POWER; Usage: STANDARD UNIVERSAL MATE-N-LOK; MIL Conformity: NO;
1-770904-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Wire Gauge (AWG): 18; Terminal Type: CRIMP; Finish Thickness: 30;
1-770007-0
TE Connectivity 1-770007-0 is a male contact with crimp terminal type for universal mate-n-lok applications. It has a rated voltage of 600V, rated current of 7A, and can accommodate wire sizes from 20 to 14 AWG. The contact is made of brass and suitable for power applications with operating temperatures ranging from -55 to 120°C.
1-770251-0
TE Connectivity 1-770251-0 is a crimp terminal with stranded construction, rated for 600V and 17A. Ideal for power applications, it accommodates wire sizes from 20 to 14 AWG and operates b/w -55°C to 120°C.
1-770987-0
TE Connectivity 1-770987-0 is a male contact plug housing with approvals from CSA and UL. It features a stranded construction, crimp terminal type, and 600V rated voltage. Ideal for discrete wire applications, it has a max operating temperature of 105°C and can accommodate wire sizes ranging from 22 to 18 AWG.
1-770253-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 13 A; Wire Gauge (AWG): 18; Maximum Cable Entry: .1 inch; Cross Section Area: 1 mm2;
17700005002
CONNECTOR ACCESSORY; Manufacturer Series: 1770000500;
17700004003
CONNECTOR ACCESSORY; Manufacturer Series: 1770000400;
1-770902-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; MIL Conformity: NO; Rated DC Voltage: 600 V; Material: BRASS;
1-770902-1
TE Connectivity's 1-770902-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications.
1-770903-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Finish Thickness: 30; Construction: STRANDED; MIL Conformity: NO;
1-770986-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Finish Thickness: 30; Cross Section Area: .4 mm2; Construction: STRANDED;
1-770004-0
TE Connectivity 1-770004-0 is a crimp terminal with approvals from CSA, UL, and VDE. It has a rated voltage of 600V and can handle temperatures from -55 to 120°C. Ideal for power applications with wire gauge ranging from 10 to 12 AWG.
1-770901-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 9.5 A; Terminal Type: CRIMP; Rated DC Voltage: 600 V; Maximum Wire Size: 22 AWG;
1-770248-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Material: BRASS; Assembly Item Name: CONTACT; MIL Conformity: NO;
1-770834-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; MIL Conformity: NO; Minimum Cable Entry: .035 inch; Minimum Wire Size: 30 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved