Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DRC23-64PAA-N010 is a 4-row combination line connector with 64 contacts, rated at 250V and 7.5A. With a body size of 1.127" x 5.254" x 1.237", it operates b/w -55°C to 125°C, suitable for panel mounting applications requiring male contact gender and solder termination in UL-certified systems meeting flammability code 94V-0 standards.
Median Price
$59.552
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$65.350
100+ parts
$52.290
1k+ parts
$50.950
10k+ parts
-
Verical
DigiKey
$53.754
Digiode
$88.512
VNN
$93.170
Nova Conductors
$117.020
Vyrian
Corphita
$83.853
Netroflash
$114.680
Continental Prestige Electronics
Authorized Procurement Solutions
Argo Parts USA
The compact body length makes this connector suitable for applications with limited space.
The high rated voltage ensures reliable electrical connections in various voltage applications.
The high rated current capacity allows for efficient signal transmission without overheating.
The panel mounting type provides secure installation on panels, ensuring stability and durability.
The solder termination type ensures strong and reliable connections, ideal for applications requiring robust electrical connections.
Combination Line Connectors DRC23-64PAA-N010 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DRC23-64PAA-N010 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Product Change Notification (PDF)
Product Change Notification 2024-02-29 (PDF)
Product Change Notification 2025-2-3 (PDF)
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Continental Device India
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
DTM06-12SB-E003
TE Connectivity
TE Connectivity's DTM06-12SB-E003 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V and can handle up to 7.5A signal current. Ideal for applications requiring a polarized, crimp termination female connector with plug body style and strain relief mounting option.
350209-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; IEC Conformity: NO; Termination Contact Finish: TIN;
ATP06-2S-BLK
Amphenol
The Amphenol ATP06-2S-BLK is a combination line connector with polyethylene insulator, rated for 25A signal current. It operates b/w -55°C to 125°C, suitable for cable mounting applications. Featuring a female contact gender and round pin/socket style, it is ideal for use in environments requiring high temperature resistance.
DT04-2P-L012
TE Connectivity's DT04-2P-L012 is a 1.708" x 1.595" x 1.25" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125°C operation at 250V and 13A signal current. It features UL-rated polarization, panel mounting, and strain relief, making it ideal for applications requiring a polarized male receptacle with two contacts.
12162144
Aptiv
The Aptiv 12162144 is a Combination Line Connector with Mating Contact Pitch of 0.236", Body Width of 0.453", and Body Depth of 1.024". It operates b/w -40 to 125°C, has a Plating Thickness of 197u, and supports up to 14A signal current. Ideal for cable mounting applications requiring polarized housing with female blade pin-skt contacts.
DF62W-9S-2.2C
COMBINATION LINE CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
12010996
Aptiv's 12010996 is a Combination Line Connector with POLYAMIDE66 insulator. It features crimp termination, male contact gender, and cable mounting type. Ideal for applications requiring reliable connections in automotive wiring systems.
DT06-3S-P012
TE Connectivity's DT06-3S-P012 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style.
AT04-6P
The Amphenol AT04-6P is a male combination line connector with 6 contacts, rated for 13A signal current. With a body size of 0.961" x 0.827" x 1.827", it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a receptacle contact style made of polyethylene insulator material.
174044-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Empty Shell: NO; IEC Conformity: NO;
175975-2
TE Connectivity's 175975-2 is a Combination Line Connector with dimensions of 0.886" x 1.575". It has Matte Tin finish, rated for 12V, and operates b/w -30 to 105°C. With 20 contacts, it uses POLYBUTYLENE TEREPHTHALATE insulator material and is ideal for board mounting in applications requiring a mains connector rating of 115/230VAC.
AT04-12PA-LE14
COMBINATION LINE CONNECTOR;
3-1564526-1
TE Connectivity 3-1564526-1 is a Combination Line Connector with dimensions 2.461" x 1.567" x 1.854". Rated for 60V, it has UL Flammability Code of 94V-0 and operates b/w -40°C to 140°C. Ideal for applications requiring a male connector with 18 contacts and a rated current of 20A.
DT06-12SA-EP08
TE Connectivity's DT06-12SA-EP08 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
DT06-08SA-C015
TE Connectivity's DT06-08SA-C015 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief.
AT06-12SC-SRGN
The Amphenol AT06-12SC-SRGN is a Combination Line Connector with 12 contacts, rated at 13A signal current. Its compact body measures 1.772" x 0.827" x 1.713", made of POLYETHYLENE for durability. Ideal for applications requiring reliable cable mounting in temperatures ranging from -55°C to 125°C.
DT06-2S-E008
TE Connectivity's DT06-2S-E008 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
AT04-2P-RD01
The Amphenol AT04-2P-RD01 is a male receptacle combination line connector with 2 contacts, rated for 13A signal current. It has a compact body size of 0.673" x 0.669" x 1.717" and operates in temperatures ranging from -55°C to 125°C. Ideal for cable mounting applications requiring reliable signal transmission.
1-350780-1
TE Connectivity 1-350780-1 is a POLYAMIDE COMBINATION LINE CONNECTOR with 4 FEMALE contacts. It has UL 94V-0 flammability rating and mounts on PANEL. Ideal for automotive and industrial applications requiring reliable electrical connections.
HC18B-S32
The Amphenol HC18B-S32 is a 32-contact combination line connector with a body size of 1.969" x 1.661" x 1.374". Rated for 5A signal current, UL94V-0 flammability, and operating temperatures from -40°C to 125°C. Ideal for cable mounting applications requiring female contacts in a plug shell style with round pin/socket contact design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRC26-50S01
TE Connectivity's DRC26-50S01 is a 5-row combination line connector with dimensions of 1.274" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 7.5A signal current. Ideal for applications requiring a polarized female connector with strain relief mounting for cables in temperatures ranging from -55°C to 125°C.
DRC23-40PA-N012
TE Connectivity's DRC23-40PA-N012 is a 4-row combination line connector with dimensions of 1.785" x 3.8". Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications requiring a polarized, soldered male receptacle with UL certification (94V-0).
DRC22-40PA
TE Connectivity's DRC22-40PA is a 1.5"x2"x3.7" combination line connector with 40 contacts, rated at 250V and 7.5A for signal current. Made of POLYAMIDE, it operates b/w -55°C to 125°C and is ideal for cable mounting applications requiring polarization key and strain relief option.
DRC22-50P01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 5; Mounting Style: STRAIGHT; Mains Connector Rating: 7.5A;
DRC26-40SA
TE Connectivity's DRC26-40SA is a 1.1"x2.7"x1.285" Combination Line Connector with NICKEL finish, GLASS FILLED POLYAMIDE insulator, and 250V rated voltage. Featuring 40 contacts in 4 rows, it operates b/w -55°C to 125°C, ideal for cable mounting applications at up to 7.5A signal current under UL standards.
DRC26-40SA-L011
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Minimum Operating Temperature: -55 Cel; MIL Conformity: NO;
DRC23-64PAA
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Terminal Pitch (mm): 4.42; Rated Current - Signal: 7.5 A;
DRC20-50P01
TE Connectivity's DRC20-50P01 is a 5-row combination line connector with 50 contacts, rated at 250V and 7.5A. With a body length of 1.987" and width of 3.094", it operates b/w -55°C to 125°C, making it suitable for board mounting applications requiring high current signal connections in various industries.
DRC23-24PA-A010
DRC23-24PA
TE Connectivity's DRC23-24PA is a 1.785" x 3.104" x 0.07" combination line connector with 24 contacts, rated at 250V and 7.5A for signal current. It operates b/w -55°C to 125°C, features UL flammability code of 94V-0, and is ideal for panel mounting applications requiring polarized male connectors with solder termination.
DRC26-24SA
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-2: W/STRAIN RELIEF; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
DRC26-50S04
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.174; Mating Contact Finish: NOT SPECIFIED; Body Depth: 1.435 inch;
DRC26-60S05
TE Connectivity's DRC26-60S05 is a 6-row combination line connector with dimensions of 1.448" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 125°C operating temperature. Ideal for applications requiring a female plug connector with 60 contacts and polarization key for signal currents up to 7.5A at -55°C to +125°C range.
DRC26-60S07
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Insulator Material: GLASS FILLED POLYAMIDE; Body or Shell Style: PLUG;
DRC26-50S02
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Termination Contact Finish: NOT APPLICABLE; Insulator Material: GLASS FILLED POLYAMIDE;
DRC26-50S03
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: 2.7 inch; Panel Mount: NO; Mating Contact Row Spacing (inch): 0.174;
DRC22-50P02
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; EMI Shielded: NO; No. of Rows Loaded: 5;
DRC23-40PB-N012
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Total No. of Contacts: 40; DIN Conformance: NO;
DRC26-60S06
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 7.5 A; Body Width: 2.7 inch; Insulator Material: GLASS FILLED POLYAMIDE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved