Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$2.250
Continental Prestige Electronics
Advanced Electronics
Bastille Electronics
Corphita
Argo Parts USA
Combination Line Connectors DRC23-24PA-A010 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Connector Type:
DRC23-24PA-A010 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2-1445022-2
TE Connectivity
DTP04-2P-E003
TE Connectivity DTP04-2P-E003 is a 1.931x.872x.848" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 25A signal current. Ideal for cable mounting applications requiring male contact gender and receptacle body style with strain relief option.
DT06-6S-E004
TE Connectivity's DT06-6S-E004 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design with UL certification.
1-1418362-1
TE Connectivity 1-1418362-1 is a COMBINATION LINE CONNECTOR with 62 contacts, rated at 36V and 40A. It has dimensions of 5.196" x 1.889" x 2.267", suitable for BOARD mounting applications in various industries due to its high operating temperature range (-40°C to +140°C) and UL certification.
1-2345658-0
TE Connectivity 1-2345658-0 is a Combination Line Connector with PBT-POLYESTER insulator, suitable for -40 to 125°C. It has 2 contacts, cable mounting type, and crimp termination. Ideal for applications requiring polarized connectors at 115/230VAC mains rating.
12033769
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Empty Shell: NO; Insulator Material: POLYAMIDE66;
1-776267-1
TE Connectivity's 1-776267-1 is a Combination Line Connector with 3 rows, 14 contacts, and UL94V-0 flammability rating. Featuring a mating contact pitch of 0.157", it is ideal for board mounting applications with a temperature range of -40 to 125°C. The connector has a polarization key, solder termination, and rated current of 17A for reliable commercial use.
54201412
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
DT06-12SB-C015
TE Connectivity's DT06-12SB-C015 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with female contacts.
12110293
Aptiv's 12110293 is a Combination Line Connector with NYLON insulator, operating from -40 to 125 °C. Featuring 3 contacts, it has FEMALE contact gender and PLUG body style. Used for cable mounting applications in commercial reliability settings.
DTM06-4S-E004
TE Connectivity's DTM06-4S-E004 is a 2-row, 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with crimp termination.
DT04-12PC-BE02
TE Connectivity's DT04-12PC-BE02 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
106462-1
TE Connectivity's 106462-1 is a Combination Line Connector with dimensions of 0.748" x 1.43" x 0.677". Made of POLYBUTYLENE TEREPHTHALATE, it operates b/w -30°C to 125°C. With a rated current of 20A, it has 2 contacts and is used for cable mounting applications.
1-207119-0
TE Connectivity 1-207119-0 is a Combination Line Connector with 0.196" Mating Contact Pitch, rated for 600V and 7.5A signal current. Ideal for board mounting applications, it features POLYAMIDE66 insulator material and tin finish contacts for durability in commercial settings.
1-1564526-1
TE Connectivity's 1-1564526-1 is a combination line connector with dimensions of 2.461" x 1.567" x 1.854". It has a rated voltage of 60V and can operate in temperatures ranging from -40°C to 140°C. This connector is commonly used in panels and has a UL flammability code of 94V-0, making it suitable for various applications requiring a max current of 20A.
350809-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN/GOLD (30) OVER NICKEL; Additional Features: MATE-N-LOK; MIL Conformity: NO;
DT04-12PA-P021
TE Connectivity's DT04-12PA-P021 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 250V and 13A, suitable for applications requiring a temperature range of -55 to 125°C. The connector features UL94V-0 flammability code and polarization key for secure mating.
DRC10-40P-A004
TE Connectivity's DRC10-40P-A004 is a 4-row combination line connector with dimensions of 0.855" x 3.851" x 0.895". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, this male connector features solder termination and UL certification.
DTM06-6S-E007
TE Connectivity's DTM06-6S-E007 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
AT06-2S-SR01BLK
Amphenol
The Amphenol AT06-2S-SR01BLK is a combination line connector with 2 contacts, rated for 13A signal current. It features a POLYETHYLENE insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with round pin sockets.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRC26-50S01
TE Connectivity's DRC26-50S01 is a 5-row combination line connector with dimensions of 1.274" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 7.5A signal current. Ideal for applications requiring a polarized female connector with strain relief mounting for cables in temperatures ranging from -55°C to 125°C.
DRC23-40PA-N012
TE Connectivity's DRC23-40PA-N012 is a 4-row combination line connector with dimensions of 1.785" x 3.8". Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications requiring a polarized, soldered male receptacle with UL certification (94V-0).
DRC22-40PA
TE Connectivity's DRC22-40PA is a 1.5"x2"x3.7" combination line connector with 40 contacts, rated at 250V and 7.5A for signal current. Made of POLYAMIDE, it operates b/w -55°C to 125°C and is ideal for cable mounting applications requiring polarization key and strain relief option.
DRC22-50P01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 5; Mounting Style: STRAIGHT; Mains Connector Rating: 7.5A;
DRC26-40SA
TE Connectivity's DRC26-40SA is a 1.1"x2.7"x1.285" Combination Line Connector with NICKEL finish, GLASS FILLED POLYAMIDE insulator, and 250V rated voltage. Featuring 40 contacts in 4 rows, it operates b/w -55°C to 125°C, ideal for cable mounting applications at up to 7.5A signal current under UL standards.
DRC26-40SA-L011
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Minimum Operating Temperature: -55 Cel; MIL Conformity: NO;
DRC23-64PAA
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Terminal Pitch (mm): 4.42; Rated Current - Signal: 7.5 A;
DRC23-64PAA-N010
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Rated Voltage: 250 V; Contact Material: NOT SPECIFIED;
DRC20-50P01
TE Connectivity's DRC20-50P01 is a 5-row combination line connector with 50 contacts, rated at 250V and 7.5A. With a body length of 1.987" and width of 3.094", it operates b/w -55°C to 125°C, making it suitable for board mounting applications requiring high current signal connections in various industries.
DRC23-24PA
TE Connectivity's DRC23-24PA is a 1.785" x 3.104" x 0.07" combination line connector with 24 contacts, rated at 250V and 7.5A for signal current. It operates b/w -55°C to 125°C, features UL flammability code of 94V-0, and is ideal for panel mounting applications requiring polarized male connectors with solder termination.
DRC26-24SA
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-2: W/STRAIN RELIEF; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
DRC26-50S04
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.174; Mating Contact Finish: NOT SPECIFIED; Body Depth: 1.435 inch;
DRC26-60S05
TE Connectivity's DRC26-60S05 is a 6-row combination line connector with dimensions of 1.448" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 125°C operating temperature. Ideal for applications requiring a female plug connector with 60 contacts and polarization key for signal currents up to 7.5A at -55°C to +125°C range.
DRC26-60S07
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Insulator Material: GLASS FILLED POLYAMIDE; Body or Shell Style: PLUG;
DRC26-50S02
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Termination Contact Finish: NOT APPLICABLE; Insulator Material: GLASS FILLED POLYAMIDE;
DRC26-50S03
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: 2.7 inch; Panel Mount: NO; Mating Contact Row Spacing (inch): 0.174;
DRC22-50P02
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; EMI Shielded: NO; No. of Rows Loaded: 5;
DRC23-40PB-N012
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Total No. of Contacts: 40; DIN Conformance: NO;
DRC26-60S06
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 7.5 A; Body Width: 2.7 inch; Insulator Material: GLASS FILLED POLYAMIDE;
DRC23-24PD-A010
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved