Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DRC26-60S07 is a 6-row, 60-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring polarized connectors with UL certification.
Median Price
$31.250
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
TTI
1+ parts
$25.680
100+ parts
$24.390
1k+ parts
$22.050
10k+ parts
-
Mouser Electronics
$29.540
$23.440
$22.860
DigiKey
$32.960
$25.004
$22.322
Master Electronics
$33.980
$23.630
$21.780
TE Connectivity
$34.790
Verical
$26.378
VNN
$20.101
Nova Conductors
$20.930
Digiode
$30.856
Electro Sonic
$36.350
$21.610
$21.500
IBS Electronics
$40.411
$30.216
$28.778
Vyrian
LJR Electronics
Q Components
Aztec Data Supply Inc.
$1.990
Continental Prestige Electronics
$20.511
Semicontronic
$26.000
$25.350
$25.220
Corphita
$29.232
Argo Parts USA
Netroflash
$19.884
$19.465
Perfect Parts
Compact size allows for easy installation in tight spaces.
Suitable for a wide range of electrical applications.
Provides excellent electrical insulation and mechanical strength.
Allows for multiple connections in one connector, increasing efficiency.
Can withstand high temperatures, making it suitable for various environments.
Meets industry standards for flammability, ensuring safety.
Capable of handling moderate current loads for reliable performance.
Provides ample connectivity options for diverse applications.
Allows for easy installation on cables, simplifying the setup process.
Common and easy-to-use connector style for various devices.
Combination Line Connectors DRC26-60S07 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Total No. of Contacts:
UL Flammability Code:
DRC26-60S07 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - DR26 - material chg 26/OCT/2021 Material Change 29/FEB/2024
PCN Assembly/Origin - Mult Devs - Tooling capacity 01/JUL/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS303C
ATM06-2S
Amphenol
The Amphenol ATM06-2S is a combination line connector with dimensions of 0.472" x 0.638" x 1.091". It has an operating temperature range of -55°C to 125°C and can handle a rated current of 7.5A, making it suitable for cable mounting applications requiring a female plug connector with round pin/socket contacts.
12162000
Aptiv
Aptiv's 12162000 is a Combination Line Connector with POLYAMIDE66 insulator. It has 2 contacts, male gender, and crimp termination. Used for cable mounting applications with mating info 12052641.
1-1564416-1
TE Connectivity 1-1564416-1 is a Combination Line Connector with dimensions 1.673" x 1.852" x 1.567". It has a rated voltage of 60V, UL flammability code of 94V-0, and can handle up to 20A current. Ideal for applications requiring male connectors with polarized polarization key and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material.
DT04-4P-CL03
TE Connectivity's DT04-4P-CL03 is a Combination Line Connector with 4 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL Flammability Code 94V-0, suitable for panel mounting.
MX23A26NF1
Japan Aviation Electronics Industry
MX23A26NF1 by Japan Aviation Electronics Industry is a Combination Line Connector with dimensions of 1.889" x 0.72" x 1.507". It features 26 contacts made of brass with TIN finish, suitable for board mounting applications. The connector is waterproof and uses solder termination, ideal for male contact gender in various electronic systems.
DT06-4S-CE06
TE Connectivity's DT06-4S-CE06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design with UL certification.
DT04-08PA-E005
TE Connectivity's DT04-08PA-E005 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-rated connector with crimp termination and strain relief mounting option.
12065402
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: SQ PIN-SKT; Mating Contact Finish: NOT SPECIFIED; No. of Rows Loaded: 1;
12040977
Aptiv's 12040977 is a Combination Line Connector with POLYAMIDE66 insulator. It has 3 contacts, female gender, and crimp termination. Used for cable mounting applications with mating info 15300003, featuring an empty shell design for versatile connectivity solutions.
1-770968-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Manufacturer Series: 770968; UL Flammability Code: 94V-0;
12010996
Aptiv's 12010996 is a Combination Line Connector with POLYAMIDE66 insulator. It features crimp termination, male contact gender, and cable mounting type. Ideal for applications requiring reliable connections in automotive wiring systems.
DT04-12PB-B016
TE Connectivity's DT04-12PB-B016 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A signal current, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
F083110
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; No. of Rows Loaded: 1; Termination Type: CRIMP; Maximum Insertion Force (N): 20; Shell Finish: TIN;
AT06-08SA-SR2BK
The Amphenol AT06-08SA-SR2BK is a 8-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operates b/w -55°C to 125°C, and features a plug body style. Ideal for cable mounting applications requiring reliable female contact pins in two rows.
12015791
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformance: NO; Contact Material: NOT SPECIFIED;
DT06-6S-E005
TE Connectivity's DT06-6S-E005 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with female contacts.
282080-1
TE Connectivity's 282080-1 is a Combination Line Connector with dimensions of 0.673" x 0.366" x 1.268". It has a rated voltage of 24V, GLASS FILLED POLYAMIDE insulator material, and can operate b/w -40 to 125°C. Ideal for applications requiring a polarized connector with 2 contacts and a signal rating of 14A.
DT04-12PC-C015
TE Connectivity's DT04-12PC-C015 is a combination line connector with a body length of 1.808", width of 1.597", and depth of 0.876". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector, made with glass-filled polyamide insulator material, is commonly used for cable mounting applications requiring a polarized, crimped male contact receptacle with strain relief.
DT04-2P-L012
TE Connectivity's DT04-2P-L012 is a 1.708" x 1.595" x 1.25" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125°C operation at 250V and 13A signal current. It features UL-rated polarization, panel mounting, and strain relief, making it ideal for applications requiring a polarized male receptacle with two contacts.
776200-1
TE Connectivity's 776200-1 is a combination line connector with dimensions of 2.394" x 1.264" x 0.757". It has a max operating temperature of 105°C and a min operating temperature of -40°C. This connector, made of POLYBUTYLENE TEREPHTHALATE, is suitable for board mounting applications and has a rated current of 8A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRC26-50S01
TE Connectivity's DRC26-50S01 is a 5-row combination line connector with dimensions of 1.274" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 7.5A signal current. Ideal for applications requiring a polarized female connector with strain relief mounting for cables in temperatures ranging from -55°C to 125°C.
DRC23-40PA-N012
TE Connectivity's DRC23-40PA-N012 is a 4-row combination line connector with dimensions of 1.785" x 3.8". Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications requiring a polarized, soldered male receptacle with UL certification (94V-0).
DRC22-40PA
TE Connectivity's DRC22-40PA is a 1.5"x2"x3.7" combination line connector with 40 contacts, rated at 250V and 7.5A for signal current. Made of POLYAMIDE, it operates b/w -55°C to 125°C and is ideal for cable mounting applications requiring polarization key and strain relief option.
DRC22-50P01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 5; Mounting Style: STRAIGHT; Mains Connector Rating: 7.5A;
DRC26-40SA
TE Connectivity's DRC26-40SA is a 1.1"x2.7"x1.285" Combination Line Connector with NICKEL finish, GLASS FILLED POLYAMIDE insulator, and 250V rated voltage. Featuring 40 contacts in 4 rows, it operates b/w -55°C to 125°C, ideal for cable mounting applications at up to 7.5A signal current under UL standards.
DRC26-40SA-L011
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Minimum Operating Temperature: -55 Cel; MIL Conformity: NO;
DRC23-64PAA
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Terminal Pitch (mm): 4.42; Rated Current - Signal: 7.5 A;
DRC23-64PAA-N010
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Rated Voltage: 250 V; Contact Material: NOT SPECIFIED;
DRC20-50P01
TE Connectivity's DRC20-50P01 is a 5-row combination line connector with 50 contacts, rated at 250V and 7.5A. With a body length of 1.987" and width of 3.094", it operates b/w -55°C to 125°C, making it suitable for board mounting applications requiring high current signal connections in various industries.
DRC23-24PA-A010
COMBINATION LINE CONNECTOR;
DRC23-24PA
TE Connectivity's DRC23-24PA is a 1.785" x 3.104" x 0.07" combination line connector with 24 contacts, rated at 250V and 7.5A for signal current. It operates b/w -55°C to 125°C, features UL flammability code of 94V-0, and is ideal for panel mounting applications requiring polarized male connectors with solder termination.
DRC26-24SA
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-2: W/STRAIN RELIEF; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
DRC26-50S04
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.174; Mating Contact Finish: NOT SPECIFIED; Body Depth: 1.435 inch;
DRC26-60S05
TE Connectivity's DRC26-60S05 is a 6-row combination line connector with dimensions of 1.448" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 125°C operating temperature. Ideal for applications requiring a female plug connector with 60 contacts and polarization key for signal currents up to 7.5A at -55°C to +125°C range.
DRC26-50S02
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Termination Contact Finish: NOT APPLICABLE; Insulator Material: GLASS FILLED POLYAMIDE;
DRC26-50S03
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: 2.7 inch; Panel Mount: NO; Mating Contact Row Spacing (inch): 0.174;
DRC22-50P02
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; EMI Shielded: NO; No. of Rows Loaded: 5;
DRC23-40PB-N012
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Total No. of Contacts: 40; DIN Conformance: NO;
DRC26-60S06
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 7.5 A; Body Width: 2.7 inch; Insulator Material: GLASS FILLED POLYAMIDE;
DRC26-60S07-L
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 125; Mating Contact Row Spacing (inch): 0.174; Empty Shell: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved